Reword documentation

Destroy the output if it is not attached.

Bugs.md

@@ -1235,89 +1235,3 @@ configuration was a NoOp. Starting with version 2.2.1, the calibration
 matrix can be set as documented.
 
 Thanks to Oliver Friedmann for providing a pull request.
-
-## Issue 66
-
-  * github issue number: #65
-  * Fixed 2.2.3
-
-In Cagebreak 2.2.2 the compatible wlroots versions were wrongly specified.
-To stop this from reoccurring, we  have added a check to our release checks.
-
-## Issue 67
-
-  * github issue number: #66
-  * Fixed 2.2.3
-
-In Cagebreak 2.2.2 dual monitors were mirrored instead of extended, changing
-established behaviour.
-
-## Issue 68
-
-  * github issue number: #38
-  * Fixed: 2.3.0
-
-After extensive discussion of how to deal with turning off outputs, the
-output command was ammended by two settings (permanent & peripheral).
-See man pages for details.
-
-Thanks to sodface for the great cooperation.
-
-## Issue 69
-
-  * github issue number: #68
-  * Fixed: 2.3.0
-
-The config man page (5) was badly formatted up to version 2.3.0.
-
-Particularly unescaped html tags caused not all information to be
-shown in the web browser view of our repo.
-
-## Issue 70
-
-  * github issue number: #62
-  * Fixed: 2.3.0
-
-The README contained a few non-intuitive phrases up to version 2.3.0.
-
-To alleviate this, the following changes were made:
-
-- Rephrase README.md (for more clarity)
-- Add CONTRIBUTING.md (to remove dev detail from README)
-- Add PR template (to present relevant info during a PR)
-
-## Issue 71
-
-  * github issue number: #60
-  * Fixed: 2.3.0
-
-Cagebreak up to 2.3.0 did not have configuration for the message location.
-
-This has been added through the initiative of unsigned-enby to improve
-accessibility.
-
-## Issue 72
-
-  * github issue number: N/A
-  * Fixed: 2.3.0
-
-A Cagebreak version before 2.3.0 broke the gamma toolkit used to tune the
-monitor colors.
-
-## Issue 73
-
-  * github issue number: #73
-  * Fixed: 2.3.1
-
-After 2.3.0 cagebreak did not build on FreeBSD. Since the fix was trivial,
-this is fixed in 2.3.1. Thank to Jan Beich for pointing this out.
-
-## Issue 74
-
-  * github issue number: #71
-  * Fixed. 2.3.0
-
-Before 2.3.0 there was an issue with rendering fullscreen applications, particularly
-under setups with multiple outputs applications spanned both outputs. Output ordering
-also did not work as advertised.
-

CONTRIBUTING.md

@@ -1,464 +0,0 @@
-# Contributing
-
-  * [Open an issue](https://github.com/project-repo/cagebreak/issues/new) and state your feature request.
-    We will get back to you.
-  * Read this document, [README.md](README.md) and [docs/dev-FAQ.md](docs/dev-FAQ.md).
-  * Ask before opening a pull request. We might not accept your
-    code and it would be sad to waste the effort.
-  * Respect the [Code of Conduct](CODE_OF_CONDUCT.md) (To date, we never
-    had to intervene - Please keep it that way!)
-
-## Good First Contributions
-
-  * Reviews are always welcome.
-    * Read the code.
-    * Read the documentation.
-    * Test whether the documentation matches the code.
-    * Test Cagebreak in more esoteric setups (many monitors, for instance).
-    * Compile the code.
-  * Ideas on improving the testing and quality assurance are particularly
-    welcome.
-  * You can share your cagebreak scripts and we might include them with Cagebreak
-    provided you agree to release them under MIT and we agree with the
-    use case and coding style.
-  * If you are happy with Cagebreak under Arch Linux, you may vote for
-    [Cagebreak in the AUR](https://aur.archlinux.org/packages/cagebreak).
-  * The points from the Contributing section above still apply.
-
-## Philosophy
-
-Cagebreak is currently developed to fit the needs of its creators.
-
-The feature set is intentionally limited - we removed
-support for a desktop background image for example.
-
-Nonetheless, don't be intimidated by any other part of this file.
-Do your best and we will collaborate toward a solution.
-
-# Development
-
-## Compatibility & Development Distribution
-
-Cagebreak supports [Arch Linux](https://archlinux.org/) and uses the libraries
-versions as they are obtained from extra and core
-at the time of release.
-
-However, Cagebreak may also work on other distributions given the
-proper library versions (Some package maintainers have done this and it
-seems to work (To date, we dealt with a few Issues and never felt the
-need to ask for the distribution the user was having the issue on.)).
-
-[![Packaging status](https://repology.org/badge/vertical-allrepos/cagebreak.svg)](https://repology.org/project/cagebreak/versions)
-
-You should use Arch Linux if you want to modify Cagebreak
-for yourself.
-
-## Review Requirements
-
-Project-repo will review your proposal before your implementation for feasibility
-and desirability. After your pull request, the code will be reviewed in conjunction
-with all other changes before the release as per the release procedure.
-
-All reviews performed by project-repo are verified by at least two people internally.
-
-## Developer Certificate of Origin (DCO)
-
-On any pull requests please include a
-
-```
-signed-off-by: YOUR IDENTIFIER OR NAME
-```
-
-DCO statement.
-
-By doing this you claim that you are legally allowed to contribute the
-code and agree to let project-repo publish it under the MIT License.
-
-### Development Environment
-
-CAVEAT: This script works exclusively on Arch Linux, which, as outlined above,
-is the development distribution of Cagebreak.
-
-Cloning the Cagebreak repository and building it is sufficient as a starting point.
-
-All other dependencies can be installed by invoking
-
-```
-meson compile devel-install -C build
-```
-
-if meson is already available or
-
-```
-./scripts/install-development-environment
-```
-
-otherwise.
-
-### Scripts
-
-Cagebreak provides a few convenience tools to facilitate development.
-
-#### Fuzzing
-
-If your fuzzing corpus is located in the directory `fuzz_corpus` you can
-just call:
-
-```
-meson compile fuzz -C build
-```
-
-If you want to use a different directory, configure cagebreak with
-`-Dcorpus=OTHERDIRECTORY` or call `./scripts/fuzz OTHERDIRECTORY`.
-
-#### Adjusting Epoch
-
-To facilitate the creation of reproducible man pages an arbitrary release
-time has to be set in `meson.build`:
-
-```
-meson compile adjust-epoch -C build
-```
-
-or
-
-```
-./scripts/adjust-epoch
-```
-
-#### Git tag
-
-If you are on the master branch, everything is ready and you want to create
-a release tag you can call:
-
-```
-meson compile git-tag -C build
-```
-
-If you want to use another signing key than the prespecified one, configure
-Cagebreak with `-Dgpg_id=GPGID`.
-
-```
-./scripts/git-tag GPGID CBVERSION
-```
-
-can be used alternatively.
-
-#### Output Hashes
-
-Hashes of release versions of all binaries can be output to `local-hashes.txt`
-via:
-
-```
-meson compile output-hashes -C build
-```
-
-Or
-
-```
-./scripts/output-hashes VERSION
-```
-
-if meson is unavailable.
-
-#### Create Signatures
-
-Creation of signatures for releases can be achieved through:
-
-```
-meson compile create-sigs -C build
-```
-
-Configure Cagebreak with `-Dgpg_id=GPGID` for a different gpg signing
-key.
-
-Without meson use:
-
-```
-./scripts/create-signatures GPGID
-```
-
-#### Set Version Number
-
-Once the version number is set within meson.build, you can use
-
-```
-meson compile set-ver -C build
-```
-
-to set the version number in the man pages and README repology minversion.
-
-Use of the script without meson is discouraged because meson.build is
-not touched by the script.
-
-#### Create Release Artefacts
-
-The following command generates the release artefacts which must be created
-once a release is completely ready to be published (the commit is tagged with
-the version of the master branch, etc.):
-
-```
-meson compile create-artefacts -C build
-```
-
-Use of the script version is discouraged.
-
-## GCC and -fanalyzer
-
-Cagebreak should compile with any reasonably new gcc or clang. Consider
-a gcc version of at least [10.1](https://gcc.gnu.org/gcc-10/changes.html) if
-you want to get the benefit of the
-[-fanalyzer](https://gcc.gnu.org/onlinedocs/gcc/Static-Analyzer-Options.html)
-flag. However, this new flag sometimes produces false-postives and we
-selectively disable warnings for affected code segments as described below.
-
-Meson is configured to set `CG_HAS_FANALYZE` if `-fanalyzer` is available.
-Therefore, to maintain portability, false-positive fanalyzer warnings are to be
-disabled using the following syntax:
-
-```
-#if CG_HAS_FANALYZE
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "WARNING OPTION"
-#endif
-```
-and after
-
-```
-#if CG_HAS_FANALYZE
-#pragma GCC diagnostic pop
-#endif
-```
-
-## Test Suite
-
-```
-meson test -C build
-```
-
-invokes all tests. This is required for a release to occur.
-
-There are four test suites:
-
-  * basic: tests actual outward-facing functionality
-    * Note optional dependencies for efficient socket interaction
-      * nc (openbsd-netcat)
-      * jq
-  * devel: tests internal properties of the repository
-    * Note potentially heavier dependencies such as
-      * shellcheck
-      * clang-format
-  * devel-long: applies more costly testing
-    * Note potentially heavier dependencies such as
-      * scan-build (static analysis (including security-relevant issues))
-  * release: tests release specific considerations
-    * Note that this is only expected to pass just before
-      a release. This checks mostly administrative things
-      to check that a release is ready.
-    * Note that non-auto tests are files in `release-non-auto-checks`
-      and have to contain the release version and current date in
-      YYYY-mm-dd format on seperate lines. This is our imperfect attempt
-      to guarantee some hard-to-automate checks are carried out before
-      a release is undertaken.
-
-Every commit should pass at least the basic and devel suites.
-
-It is expected that cagebreak passes at least the
-basic, devel and devel-long suites when commits are pushed:
-
-```
-meson test -C build --suite basic --suite devel
-```
-
-The basic suite can be used to test a binary. This is
-useful for PKGBUILDs and their equivalents in other
-systems.
-
-```
-meson test -C build --suite basic
-```
-
-## Fuzzing
-
-Along with the project source code, a fuzzing framework based on `libfuzzer` is
-supplied. This allows for the testing of the parsing code responsible for reading
-the `cagebreak` configuration file. When `libfuzzer` is available (please
-use the `clang` compiler to enable it), building the fuzz-testing software can
-be enabled by passing `-Dfuzz=true` to meson. This generates a `build/fuzz/fuzz-parse`
-binary according to the `libfuzzer` specifications. Further documentation on
-how to run this binary can be found [here](https://llvm.org/docs/LibFuzzer.html).
-
-Here is an example workflow:
-
-```
-rm -rf build
-CC=clang meson setup build -Dfuzz=true -Db_sanitize=address,undefined -Db_lundef=false
-ninja -C build/
-mkdir build/fuzz_corpus
-cp examples/config build/fuzz_corpus/
-WLR_BACKENDS=headless ./build/fuzz-parse -jobs=12 -max_len=50000 -close_fd_mask=3 build/fuzz_corpus/
-```
-
-You may want to tweak `-jobs` or add other options depending on your own setup.
-We have found code path discovery to increase rapidly when the fuzzer is supplied
-with an initial config file. We are working on improving our fuzzing coverage to
-find bugs in other areas of the code.
-
-### Caveat
-
-Currently, there are memory leaks which do not seem to stem from our code but rather
-the code of wlroots or some other library we depend on. We are working on the problem.
-In the meantime, add `-Db_detect-leaks=0` to the meson command to exclude memory leaks.
-
-## Reproducible Builds
-
-Cagebreak offers reproducible builds given the exact library versions specified
-in `meson.build`. Should a version mismatch occur, a warning will be emitted. We have
-decided on this compromise to allow flexibility and security. In general we will
-adapt the versions to the packages available under Arch Linux at the time of
-release.
-
-There are reproducibility issues up to and including release `1.2.0`. See
-`Issue 5` in [Bugs.md](Bugs.md).
-
-### Reproducible Build Instructions
-
-All hashes and signatures are provided for the following build instructions.
-
-```
-meson setup build -Dxwayland=true -Dman-pages=true --buildtype=release
-ninja -C build
-```
-
-### Hashes for Builds
-
-For every release after 1.0.5, hashes will be provided.
-
-For every release after 1.7.0, hashes will be provided for man pages too.
-
-See [Hashes.md](Hashes.md)
-
-### GPG Signatures
-
-For every release after 1.0.5, a GPG signature will be provided in `signatures`.
-
-The current signature is called `cagebreak.sig`, whereas all older signatures
-will be named after their release version.
-
-Due to errors in the release process, the releases 1.7.1 and 1.7.2 did not include the release
-signatures in the appropriate folder of the git repository. However, signatures were provided
-as release-artefacts at the time of release. The signatures were introduced into the
-repository with 1.7.3. The integrity of cagebreak is still the same because the signatures were
-provided as release-artefacts (which were themselves signed) and the hashes in Hashes.md
-are part of a signed release tag.
-
-### Signing Keys
-
-All releases are signed by at least one of the following collection of
-keys.
-
-  * E79F6D9E113529F4B1FFE4D5C4F974D70CEC2C5B (expired)
-  * 4739D329C9187A1C2795C20A02ABFDEC3A40545F (expired)
-  * 7535AB89220A5C15A728B75F74104CC7DCA5D7A8 (expired)
-  * 827BC2320D535AEAD0540E6E2E66F65D99761A6F (expired)
-  * A88D7431E5BAAD0B6EAE550AC8D61D8BD4FA3C46 (expired)
-  * 8F872885968EB8C589A32E9539ACC012896D450F (expired)
-  * 896B92AF738C974E0065BF42F2576BD366156BB9 (expired)
-  * AA927AFD50AF7C6810E69FE8274F2C605359E31B (expired)
-  * BE2DED372287BC4EB2213E13A0C743848A638955 (expired)
-  * 0F3476E4B2404F95EC41600683D5810F7911B020 (expired)
-  * [4E82C72C6B3E58A7BC4FF8554909F84CA83BB867](keys/cagebreak_signing_key_11@project-repo.co.pub)
-  * [5AEB1A2EB0D13F67E306AC59DC0CC81BE006FD85](keys/cagebreak_signing_key_12@project-repo.co.pub)
-  * [438C27DDB5D174673DF4D67B451205B3528C7C63](keys/cagebreak_signing_key_13@project-repo.co.pub)
-  * [81372DDB8124349F0303B77448D7E2EE3343E3AA](keys/cagebreak_signing_key_14@project-repo.co.pub)
-
-Should we at any point retire a key, we will only replace it with keys signed
-by at least one of the above collection.
-
-We registered project-repo.co and added mail addresses after release `1.3.0`.
-
-We now have a mail address and its key is signed by signing keys. See [SECURITY.md](SECURITY.md)
-for details.
-
-The full public keys can be found in `keys/` along with any revocation certificates.
-
-## Versioning & Branching Strategy
-
-Cagebreak uses [semantic versioning](https://semver.org).
-
-There are three permanent branches in cagebreak:
-
-  * `master` (for releases)
-  * `development` (for polishing code between releases)
-  * `hotfix` (for small emergent releases, usually up-to-date with master)
-
-Releases are merged to master as per the release procedure, with
-reasonable exceptions as the situation requires.
-
-The release commit is tagged with the release version.
-
-In the past, our git history did not perfectly reflect this scheme.
-
-## Release Procedure
-
-The release procedure outlines the process for a release to occur.
-
-  * [ ] `git checkout development`
-  * [ ] `git pull origin development`
-  * [ ] `git push origin development`
-  * [ ] Arch Build System is up to date
-  * [ ] `meson test -C build/` just to get an overview
-  * [ ] Update internal wiki
-  * [ ] Adjust version number in meson.build
-  * [ ] `meson compile set-ver -C build`
-  * [ ] Add new files to meson.build or hardcoded testing variable
-  * [ ] Commit changes
-  * [ ] `git push origin development`
-  * [ ] Complete relevant documentation
-    * [ ] New features
-      * [ ] tests added and old test scripts adjusted
-      * [ ] man pages
-        * [ ] cagebreak
-        * [ ] cagebreak-config
-        * [ ] cagebreak-socket
-        * [ ] example config
-      * [ ] FAQ.md
-      * [ ] Changelog.md for major and minor releases but not patches
-    * [ ] Check changes for SECURITY.md relevance (changes to socket scope for example)
-      * [ ] Synchronize any socket changes to cagebreak-socket man page
-    * [ ] Document fixed bugs in Bugs.md
-      * [ ] Include issue discussion from github, where applicable
-  * [ ] `meson compile adjust-epoch -C build`
-  * [ ] Commit changes
-  * [ ] `git push origin development`
-  * [ ] Testing
-    * [ ] Manual testing
-    * [ ] `meson compile fuzz -C build` for at least one hour
-  * [ ] Adjust Hashes.md - Use `meson compile output-hashes -C build` to add Hashes or aid in repro check
-  * [ ] Commit changes
-  * [ ] `git push origin development`
-  * [ ] Complete release-non-auto-checks
-  * [ ] `meson compile create-sigs -C build`
-  * [ ] Commit and push signatures, hashes and non-auto-check files
-  * [ ] `meson test -C build` passes everything except some release tests
-  * [ ] `git add` relevant files
-  * [ ] `git commit`
-  * [ ] `git push origin development`
-  * [ ] `git checkout master`
-  * [ ] `git pull --tags origin master`
-  * [ ] `git merge --squash development`
-  * [ ] `git commit` and insert message
-  * [ ] `meson compile git-tag -C build`
-  * [ ] `meson compile create-artefacts -C build`
-  * [ ] `meson test -C build` THIS MUST PASS WITHOUT ANY FAILURES WHATSOEVER
-  * [ ] `git push --tags origin master`
-  * [ ] `git checkout development` (merge to development depends on whether release was a hotfix)
-  * [ ] `git merge master`
-  * [ ] `git push --tags origin development`
-  * [ ] `git checkout hotfix` (hotfix is to be kept current with master after releases)
-  * [ ] `git merge master`
-  * [ ] `git push --tags origin hotfix`
-  * [ ] Upload archives and signatures as release assets
-  * [ ] Delete feature branches if appropriate
-  * [ ] Manage package release
-

Changelog.md

@@ -1,100 +1,40 @@
 # Changelog
 
-## Release 2.3.0
+## Release 1.0.0
 
-Functionality:
-  * Add configuration to anchor position of messages (#60, 71 in Bugs.md).
-  * Add output priorisation (#38, 68 in Bugs.md).
-  * Print whether output is active in dump.
+Adds basic tiling window manager functionality to cage.
 
-Bug Fixes:
-  * Fix gamma control (72 in Bugs.md).
-  * Add missing commands to example config.
-  * Add message_config to dump output.
+## Release 1.1.0
 
-Example Scripts:
-  * Add screenshot script.
-  * Make example scripts standalone.
+Unifies commands and actions. See Issue 4 in Bugs.md.
 
-Documentation:
-  * Escape html tags in config man page. (#68, 69 in Bugs.md)
-  * Improve README.md (#62, 70 in Bugs.md).
-  * Improve SECURITY.md.
-  * Add CONTRIBUTING.md (#62, 70 in Bugs.md).
-  * FAQ: Add Firefox screenshare instructions for wayland.
-  * FAQ: Add wlroots downgrading instructions for workaround in case of temporary wlroots incompatibility.
-  * Update copyright notices to 2024.
+## Release 1.2.0
 
-Development Tooling:
-  * Add new gpg keys (signed by the old ones).
-  * Add PR template.
-  * Add dev-FAQ.
-  * Remove now-unnecessary fanalyzer pragmas.
+Adds output configuration as described in the man pages.
 
-## Release 2.2.0
+## Release 1.3.0
 
-  * Add custom events
-  * Fix Issue 62 (#46 Github)
-  * Fix Issue 63 (environment variables test)
-  * Fix Issue 64 (pointer focus bug)
+Adds IPC as described in the man pages.
 
-## Release 2.1.0
+## Release 1.4.0
 
-  * Add -bs (bad security) option
-  * Fix Issue 57 (SPDX spelling error #39)
-  * Fix Issue 59 (meson install settings)
-  * Fix Issue 55 (npd)
-  * Fix Issue 56 (npd)
-  * Fix Issue 58 (#40 config)
-  * Improve release procedure
-  * Add miniscule test suite
-  * Adjust Cagebreak to wlroots 0.16.2
-  * New GPG Keys
+Adds close command for windows as described in the man pages.
 
-## Release 2.0.0
+## Release 1.5.0
 
-This is a major release and includes BREAKING changes!
+Adds options to disable or enable outputs. See Issue 22 in Bugs.md and Issue #2 on github.
 
-Breaking Changes:
+## Release 1.6.0
 
-  * More intuitive switch of focus, next, prev and exchange (#20, 40 in Bugs.md)
-    Cagebreak will probably still feel broadly the same though.
-  * Remove -r flag - This is replaced by output configuration.
-  * Socket disabled by default - The socket is enabled by invoking Cagebreak with the -e flag.
-  * Socket permissions restricted to the user of the Cagebreak process (700)
-    This may require modification of scripts interacting with the socket with
-    different UIDs than the UID of the Cagebreak process.
-  * Rename "Current frame" indicator to "Current tile"
+Adds support for non-build dependencies and an option for builds without pandoc.
 
-Changelog:
+## Release 1.7.0
 
-  * Move to wlr_scene
-  * Add events displaying change over the socket
-    * this enables scripting tools
-  * Add support for scaling outputs (thanks to Oliver Friedmann)
-  * Remove -r flag
-  * Add rotation to output configuration
-  * Add cursor enable|disable flag
-  * Add input keyboard configuration
-  * Custom path flag for configuration file
-  * Restrict socket permissions to the user running cagebreak (700)
-  * Fix Issue #31 (resolve some terminology) 38 in Bugs.md
-  * Fix Issue #30 - 39 in Bugs.md
-  * Fix Issue #20 - 40 in Bugs.md
-  * Fix Issue #12 - 41 in Bugs.md (dump + events over socket)
-  * Fix Bugs found via scan-build static analysis (42 - 45 in Bugs.md)
-  * Fix Issue #33 - 46 in Bugs.md
-  * Fix Issue #32 - 47 in Bugs.md
-  * Fix Issue #16 - 48 in Bugs.md
-  * Fix Issue #3 - 49 in Bugs.md (disabling keybinding interpretation for specific keyboards is now possible)
-  * Fix Issue #26 - 50 in Bugs.md
-  * Fix Issue #7 - 51 in Bugs.md (Change cursor to square while Cagebreak is waiting for a key)
-  * Fix config bug for some commands - 52 in Bugs.md
-  * Fix Issue #35 - 53 in Bugs.md (update to wlroots 0.16.1)
-  * Improve FAQ.md (related to some Issues)
-  * Disable outputs when unable to set any mode (crashed previously)
-  * Add Code of Conduct
-  * Print version number on startup
+Improves window ordering.
+
+## Release 1.8.0
+
+Adds libinput configuration and virtual keyboard and pointer support.
 
 ## Release 1.9.0
 
@@ -124,39 +64,65 @@ Changelog:
   - Add new cagebreak email contact gpg key
   - Add new project-repo AUR gpg key (relevant for cagebreak-pkgbuild)
 
-## Release 1.8.0
+## Release 2.0.0
 
-Adds libinput configuration and virtual keyboard and pointer support.
+This is a major release and includes BREAKING changes!
 
-## Release 1.7.0
+Breaking Changes:
+  * More intuitive switch of focus, next, prev and exchange (#20, 40 in Bugs.md)
+    Cagebreak will probably still feel broadly the same though.
+  * Remove -r flag - This is replaced by output configuration.
+  * Socket disabled by default - The socket is enabled by invoking Cagebreak with the -e flag.
+  * Socket permissions restricted to the user of the Cagebreak process (700)
+    This may require modification of scripts interacting with the socket with
+    different UIDs than the UID of the Cagebreak process.
+  * Rename "Current frame" indicator to "Current tile"
 
-Improves window ordering.
+Changelog:
+  * Move to wlr_scene
+  * Add events displaying change over the socket
+    * this enables scripting tools
+  * Add support for scaling outputs (thanks to Oliver Friedmann)
+  * Remove -r flag
+  * Add rotation to output configuration
+  * Add cursor enable|disable flag
+  * Add input keyboard configuration
+  * Custom path flag for configuration file
+  * Restrict socket permissions to the user running cagebreak (700)
+  * Fix Issue #31 (resolve some terminology) 38 in Bugs.md
+  * Fix Issue #30 - 39 in Bugs.md
+  * Fix Issue #20 - 40 in Bugs.md
+  * Fix Issue #12 - 41 in Bugs.md (dump + events over socket)
+  * Fix Bugs found via scan-build static analysis (42 - 45 in Bugs.md)
+  * Fix Issue #33 - 46 in Bugs.md
+  * Fix Issue #32 - 47 in Bugs.md
+  * Fix Issue #16 - 48 in Bugs.md
+  * Fix Issue #3 - 49 in Bugs.md (disabling keybinding interpretation for specific keyboards is now possible)
+  * Fix Issue #26 - 50 in Bugs.md
+  * Fix Issue #7 - 51 in Bugs.md (Change cursor to square while Cagebreak is waiting for a key)
+  * Fix config bug for some commands - 52 in Bugs.md
+  * Fix Issue #35 - 53 in Bugs.md (update to wlroots 0.16.1)
+  * Improve FAQ.md (related to some Issues)
+  * Disable outputs when unable to set any mode (crashed previously)
+  * Add Code of Conduct
+  * Print version number on startup
 
-## Release 1.6.0
+## Release 2.1.0
 
-Adds support for non-build dependencies and an option for builds without pandoc.
+  * Add -bs (bad security) option
+  * Fix Issue 57 (SPDX spelling error #39)
+  * Fix Issue 59 (meson install settings)
+  * Fix Issue 55 (npd)
+  * Fix Issue 56 (npd)
+  * Fix Issue 58 (#40 config)
+  * Improve release procedure
+  * Add miniscule test suite
+  * Adjust Cagebreak to wlroots 0.16.2
+  * New GPG Keys
 
-## Release 1.5.0
-
-Adds options to disable or enable outputs. See Issue 22 in Bugs.md and Issue #2 on github.
-
-## Release 1.4.0
-
-Adds close command for windows as described in the man pages.
-
-## Release 1.3.0
-
-Adds IPC as described in the man pages.
-
-## Release 1.2.0
-
-Adds output configuration as described in the man pages.
-
-## Release 1.1.0
-
-Unifies commands and actions. See Issue 4 in Bugs.md.
-
-## Release 1.0.0
-
-Adds basic tiling window manager functionality to cage.
+## Release 2.2.0
 
+  * Add custom events
+  * Fix Issue 62 (#46 Github)
+  * Fix Issue 63 (environment variables test)
+  * Fix Issue 64 (pointer focus bug)

FAQ.md

@@ -2,9 +2,14 @@
 
 ## How do I do a particular thing with cagebreak?
 
-  * Check the [man pages](manuals.md).
-  * Check the rest of this file.
-  * [Open an issue](https://github.com/project-repo/cagebreak/issues/new) or get in touch (See section Email Contact in [SECURITY.md](SECURITY.md)).
+  * Check the man pages
+    * [cagebreak config](man/cagebreak-config.5.md) (probably where you find the answer)
+    * [cagebreak](man/cagebreak.1.md) (command line options etc.)
+    * [cagebreak-socket](man/cagebreak-socket.7.md) (socket information, mostly useful for scritping)
+  * Check the rest of this FAQ
+  * [Open an issue](https://github.com/project-repo/cagebreak/issues/new) or otherwise get in touch with the development team (See section Email Contact in [SECURITY.md](SECURITY.md)).
+
+Note that the feature set of cagebreak is intentionally limited.
 
 ## How do I remap Caps Lock?
 
@@ -12,21 +17,6 @@ Remapping Caps Lock globally seems to be the best option.
 Follow instructions [here](https://wiki.archlinux.org/title/Linux_console/Keyboard_configuration) to achieve this (should be roughly
 distribution-agnostic).
 
-## What do I do if Cagebreak does not work with the current wlroots version?
-
-You can probably downgrade wlroots with
-
-```
-$ pacman -U /var/cache/pacman/pkg/old-version
-```
-
-If you have cleared your package cache, see instructions in the [ArchWiki](https://wiki.archlinux.org/title/downgrading_packages#Return_to_an_earlier_package_version).
-
-Cagebreak should start working again after the downgrade.
-
-After a new release, the downgrading will no longer be necessary (in fact,
-downgrading will probably break your setup).
-
 ## How do I get firefox to run under wayland?
 
 Set the following environment variables
@@ -36,17 +26,6 @@ Set the following environment variables
 
 to activate wayland support for firefox.
 
-## How do I get firefox to screenshare properly?
-
-Execute the following commands with the appropriate env vars:
-
-```
-export XDG_SESSION_TYPE=wayland
-export XDG_CURRENT_DESKTIP=sway
-/usr/lib/xdg-desktop-portal -r
-/usr/lib/xdg-desktop-portal-wlr
-```
-
 ## How do I map characters which are not on the Keyboard?
 
 Suppose you want to use a command like `bind` for a character

Hashes.md

@@ -1,85 +1,5 @@
 # Hashes
 
-2.3.1 cagebreak
-
-  * sha 256: 51d76608726a6251690d6dd1371cdfaa6eae5188a08798cda9c9280b3fcbe3fa
-  * sha 512: 648c61958f5920b3377f53706f7a820750a2b7dd1d486db4a93d803fe38be4aa728058e82d404fde4e7f1627b9809050a5760c4193562a6c23e39d0851f1ddf0
-
-2.3.1 cagebreak.1
-
-  * sha 256: c58390d641514b2eb623a803dc665116d60079b8aac39219b939cc36ffb72038
-  * sha 512: 82c0248764026666e6fbe3e29bf48062db07d6a86c787258474312a0eae23a73898bcc2fd6c407fbac0a25d6414f9ca9a56e5d17d7c8adfe9e7ce903e6ed5978
-
-2.3.1 cagebreak-config.5
-
-  * sha 256: 5cf2f8c883ce89563bbae1fa4f0e00bda42c4ba01f680fc75fc71ab3f6e1f2a8
-  * sha 512: 10d72ca588f5e2123dc59ede89dafd0e6fb9cd6cbc83922ada751c37f9000c86f68e5e6bf9f68298380ec0f9cbce1f22d0a0f712d0004b168a0b039a41f32358
-
-2.3.1 cagebreak-socket.7
-
-  * sha 256: 0363113a32533a6fb4a1e7030cff880f001db5e0c29bb8bd74f8f11067dce3d1
-  * sha 512: f957ebad717456901a028344211609d009d9b8c2a68ef88a0d60fca8dc91cc1fe1aba58a9e84d16782190b59b9fcd1d45ecc154c020018609c8fcdf940aa18e4
-
-2.3.0 cagebreak
-
-  * sha 256: 549e82f6bb1af87c9272fb92d39c6f235b0f780885b066c32db5a5c7588da378
-  * sha 512: d05e5ac9e4295bed93b8872a815b1f8aaf8ddc2448c01f84d5d29b4d5610bb5c0c50f87b15653bb663a9f772a899dc7b8215042db3ac86aa1ba3000ccb9757d2
-
-2.3.0 cagebreak.1
-
-  * sha 256: 11cbe6ea82fa19064ee5b9d8346dbaa8ca8251948c5f5eee7387516edcfbeab0
-  * sha 512: 76f15788aeebb2cab5a0a477f1427646964c6011c20d64f43f6c445bf08e5371971607a7565017fd05f4f2d75c66da5d79948643618eeb4d3619bc7e6128cffe
-
-2.3.0 cagebreak-config.5
-
-  * sha 256: dc8755bbed108cd0cf76f05eee0c6d08550373eab5f75895755abddb7b86e84c
-  * sha 512: b93caa7cd4ec9085409472982ce72a8e55a369cb830a7d3132801b24db0660e4259a3e9b229dbaf960bc28c4d8a384a19f7bbb11e74f7c4e3f90b04d2b5280ee
-
-2.3.0 cagebreak-socket.7
-
-  * sha 256: f33abe5f18cb087ab421c3b647437c31a01e5c731638cac859a9b9ea1f88099e
-  * sha 512: f973bd2a67d9ca8b4bf2d150c4f1151163f379c7048e1e4be098d8032a424c77bd4dfaa98635bb8cdefa0b2da147b9b6a87bcbcaa87c378b5040e708f8ca5a97
-
-2.2.3 cagebreak
-
-  * sha 256: 265a9d09622272ca6ea79ddcdbdc6003704106814eb05a2b7547a77a982263de
-  * sha 512: 757f837a7e6ddd71fed88c4e1aab5cab9d4d07e8b76f280eed9afa35a2eaee23c0553299fe49a0139c754179d0df68c1303725f1f909921d078516e14ba3f21f
-
-2.2.3 cagebreak.1
-
-  * sha 256: 275698641476efa40fc1b33a8025e6dbba3ec931fbaf0a627c0748dad987ed4d
-  * sha 512: 617891ded06657e31daefee84a03191ad6e03892118f1790a5ebaa6e847c4d18d4b6849edc00841bd68abc9e0e0a111153efe102db02ce3d408c903b0d045927
-
-2.2.3 cagebreak-config.5
-
-  * sha 256: 5967e9131d1ee16ffa046a732911c902e41f2e18f3170d11a47b9be596b4978a
-  * sha 512: 6d3c5fbb2b95a75d7c5a8ed8b5922cfcc4135857b389652572c5d9c211c6da9cf8ef0b5dc0e8eaa540c6b1c2dd215f512df2ef49ce80c34e8e5ad170bfb7134e
-
-2.2.3 cagebreak-socket.7
-
-  * sha 256: cb1bde8a6fb2a1fa2b7b8db7fdef9b933cd471ca604e15d1dd9133859fa6eea3
-  * sha 512: 1d99672cb7ac7323790d47986d206bf8c392698db0cd52978963deb6e85118c6822e2d45c7fa66e8636e95214f8893d963a3157ca24239d2fd2d78b1e26f11e7
-
-2.2.2 cagebreak
-
-  * sha 256: 98e0dfe870a7242fdf7c6fb1a5c520cfe7d1154b3f139560da6cb86b2430b2a0
-  * sha 512: c335f8f6e226203e797e232caead74db9b1e7f24d5edf80dd99a0c00c5f4e81351a5ddcad4f601a12618ebed5c62be547462c4f06ae4ccb6a622a869ee8741ec
-
-2.2.2 cagebreak.1
-
-  * sha 256: c655fff018377b5ee541854ee428559ba4c5080d44f87247fe608f18651b0764
-  * sha 512: 7cbef17cbe3c59cde21466d6c76e1a34ffce748d2d9011a77bd7703f605b737e344cabaad1e3a599316321481524cb860b2533ab6bef2e7714c00b2641fe962c
-
-2.2.2 cagebreak-config.5
-
-  * sha 256: b799e0252d7224befc92bdd143d00dc3f42a38e39f510f3ace575b03f293a788
-  * sha 512: 3778db9ff07429efb74b4b07476193844698e07ea91a742aac078391ba38fb07987dc61ba312c30b6eb04ad2d847ee552826e7a09be8dc572be5626c27059df3
-
-2.2.2 cagebreak-socket.7
-
-  * sha 256: dd10359fd1840909bb817858668e67bdd433f367b0ed199328e4b29c99529322
-  * sha 512: 67f8c39864472c9b2396946a943ce249297b1b9fc5e452a4051f0512fd61b4a22906e1a16aee1c2bf6cacb3b9cd7a11da19c5d760c192020402008eab379eee1
-
 2.2.1 cagebreak
 
   * sha 256: 96469a78eeaddf9476c82e0ab8a0e35a95b3119bf83633a54feb8f3f5780df2f

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2020-2024 The Cagebreak authors
+Copyright (c) 2020-2023 The Cagebreak authors
 Copyright (c) 2018-2020 Jente Hidskes
 Copyright (c) 2019 The Sway authors
 

README.md

@@ -1,55 +1,90 @@
-# Cagebreak: A Tiling Wayland Compositor
+# Cagebreak: A Wayland Tiling Compositor
 
-[![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/6532/badge)](https://bestpractices.coreinfrastructure.org/projects/6532) [![Packaging status](https://repology.org/badge/tiny-repos/cagebreak.svg)](https://repology.org/project/cagebreak/versions) [![AUR package](https://repology.org/badge/version-for-repo/aur/cagebreak.svg?minversion=2.3.1)](https://repology.org/project/cagebreak/versions)
+[![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/6532/badge)](https://bestpractices.coreinfrastructure.org/projects/6532) [![Packaging status](https://repology.org/badge/tiny-repos/cagebreak.svg)](https://repology.org/project/cagebreak/versions) [![AUR package](https://repology.org/badge/version-for-repo/aur/cagebreak.svg?minversion=2.2.1)](https://repology.org/project/cagebreak/versions)
 
-[![Contact](img/mail.svg)](SECURITY.md) [![Manuals](img/manuals.svg)](manuals.md) [![FAQ](img/faq.svg)](FAQ.md) [![CONTRIBUTING](img/contributing.svg)](CONTRIBUTING.md) [![ArchWiki](img/archwiki.svg)](https://wiki.archlinux.org/title/Cagebreak) [![AUR](img/aur.svg)](https://aur.archlinux.org/packages?O=0&K=cagebreak)
+## Quick Introduction
 
-## Introduction
+Cagebreak is a [Wayland](https://wayland.freedesktop.org/) tiling compositor
+based on [Cage](https://github.com/Hjdskes/cage) and inspired by [ratpoison](https://www.nongnu.org/ratpoison/).
 
-Cagebreak provides a [ratpoison](https://www.nongnu.org/ratpoison/)-inspired, [cage](https://github.com/Hjdskes/cage)-based, tiling [Wayland](https://wayland.freedesktop.org/) compositor.
+### Purpose
 
-  * Bugs, Contact Information and New Features:
-    * [Open an issue](https://github.com/project-repo/cagebreak/issues/new).
-    * Write an e-mail (See [SECURITY.md](SECURITY.md)).
-    * The Roadmap below outlines our plans.
-  * Compatibility & Development Distribution:
-    * Cagebreak supports [Arch Linux](https://archlinux.org/) and uses the library
-      versions from extra and core at the time of release.
-      Most other setups work with a [bit of luck](https://repology.org/project/cagebreak/versions).
-  * Quick Installation (on ArchLinux, more [here (ArchWiki)](https://wiki.archlinux.org/title/Cagebreak)):
-    1. Use the [cagebreak PKGBUILD](https://aur.archlinux.org/packages/cagebreak).
-    2. Add an example config such as [config](examples/config) to `$USER/.config/cagebreak/config`
-    3. Execute cagebreak like any other binary.
-  * Documentation:
-    * [man pages](manuals.md)
-    * [README](README.md), [FAQ](FAQ.md) & [SECURITY.md](SECURITY.md)
-  * What's new?: [Changelog](Changelog.md)
-  * Uninstallation: `pacman -R cagebreak`
-  * Contributing:
-    * [Open an issue](https://github.com/project-repo/cagebreak/issues/new) and state your idea.
-      We will get back to you.
-    * Ask before you open a pull request. We might not accept your code and
-      it would be sad to waste the effort.
-    * Respect the [Code of Conduct](CODE_OF_CONDUCT.md) (To date, we've never
-      had to intervene. - Keep it that way!)
-  * Name: Cagebreak breaks the kiosk of [Cage](https://github.com/Hjdskes/cage) into tiles, hence the name.
+The goal of this project is to provide a successor to ratpoison for Wayland.
+However, this is no reimplementation of ratpoison.
+
+#### New Features, Bugs and Contact Information
+
+Should you want to know if a feature will be implemented, file a bug or
+get in touch, [open an issue](https://github.com/project-repo/cagebreak/issues/new)
+or write an e-mail (See [SECURITY.md](SECURITY.md) for details.).
+
+The Roadmap section outlines what is planned for the future.
+
+#### Compatibility & Development Distribution
+
+Cagebreak supports [Arch Linux](https://archlinux.org/) and uses the libraries
+(and software versions) as they are obtained through [pacman](https://wiki.archlinux.org/title/Pacman)
+at the time of release. Any other use is out of scope.
+
+Most other setups probably work with a bit of luck. We
+make no guarantees.
+
+### Quick Installation
+
+This assumes Arch Linux:
+
+1. Use the [cagebreak PKGBUILD](https://aur.archlinux.org/packages/cagebreak).
+2. Add an example config such as [config](examples/config) to `$USER/.config/cagebreak/config`
+3. Execute cagebreak like any other binary.
+
+See the [ArchWiki](https://wiki.archlinux.org/title/Cagebreak#Getting_started) for
+details on getting started and the documentation for everything else.
+
+### Documentation
+
+  * the rest of this file
+  * the man pages:
+    * [cagebreak](man/cagebreak.1.md)
+    * [configuration](man/cagebreak-config.5.md)
+    * [socket](man/cagebreak-socket.7.md)
+  * the [FAQ](FAQ.md)
+  * [SECURITY.md](SECURITY.md)
+
+#### What's new?
+
+See the [Changelog](Changelog.md).
+
+### Uninstallation
+
+`pacman -R cagebreak` should be sufficient.
+
+### Contributing
+
+  * Just [open an issue](https://github.com/project-repo/cagebreak/issues/new) and state your idea.
+    We will consider the proposal and get back to you.
+  * Don't open a pull request. We might not accept your code and
+    it would be sad to waste the effort.
+  * Respect the [Code of Conduct](CODE_OF_CONDUCT.md) (To date, we never
+    had to intervene - Keep it that way!)
+
+### Name
+
+Cagebreak is based on [Cage](https://github.com/Hjdskes/cage), a Wayland kiosk
+compositor. Since it breaks the kiosk into tiles the name
+Cagebreak seemed appropriate.
 
 ## Installation
 
-On [Arch Linux](https://archlinux.org/), use the [AUR](https://aur.archlinux.org/) [PKGBUILDs](https://wiki.archlinux.org/title/PKGBUILD):
+On Arch Linux, just use the PKGBUILDs from the [AUR](https://aur.archlinux.org/):
 
   * Using [cagebreak](https://aur.archlinux.org/packages/cagebreak), Cagebreak is
-    built on the target system (since release 1.3.0)
+    compiled on the target system (since release 1.3.0)
   * Using [cagebreak-bin](https://aur.archlinux.org/packages/cagebreak-bin),
-    pre-built binaries are extracted
-    to the target system (since release 1.3.2)
+    the pre-built binaries are extracted to
+    appropriate paths on the target system (since release 1.3.2)
 
 See [cagebreak-pkgbuild](https://github.com/project-repo/cagebreak-pkgbuild) for details.
 
-You may check out other distros here:
-
-[![Packaging status](https://repology.org/badge/vertical-allrepos/cagebreak.svg)](https://repology.org/project/cagebreak/versions)
-
 ### Obtaining Source Code
 
 There are different ways to obtain cagebreak source:
@@ -59,69 +94,61 @@ There are different ways to obtain cagebreak source:
 
 #### Verifying Source Code
 
-There are ways to verify that you obtained the correct source (See `keys/`
-and [CONTRIBUTING](CONTRIBUTING.md)):
+There are corresponding methods of verifying that you obtained the correct code:
 
-  * signature for the tarball of release assets starting at release 1.2.1
-  * signed tags for releases in the git history
+  * our git history includes signed tags for releases
+  * release assets starting at release 1.2.1 contain a signature for the tarball
 
 ## Building Cagebreak
 
-Cagebreak uses the [meson](https://mesonbuild.com/) build system.
+You can build Cagebreak with the [meson](https://mesonbuild.com/) build system. It
+requires wayland, wlroots and xkbcommon to be installed. Note that Cagebreak is
+developed against the latest tag of wlroots, in order not to constantly chase
+breaking changes as soon as they occur.
 
-Cagebreak is developed against the latest tag of wlroots, so as not to constantly
-chase breaking changes.
-
-Execute the following commands to build Cagebreak:
+Simply execute the following steps to build Cagebreak:
 
 ```
-$ meson setup build -Dxwayland=true -Dman-pages=true --buildtype=release
+$ meson setup build
 $ ninja -C build
 ```
 
-### Man Pages
+#### Release Build
 
-Remove `-Dman-pages=true` to disable man page generation.
+By default, this builds a debug build. To build a release build, use `meson
+setup build --buildtype=release`.
 
-To generate man pages, make sure that you have [scdoc](https://archlinux.org/packages/extra/x86_64/scdoc/) installed.
+##### Xwayland Support
 
-### Release Build
+Cagebreak comes with compile-time support for XWayland. To enable this,
+first make sure that your version of wlroots is compiled with this
+option. Then, add `-Dxwayland=true` to the `meson` command above. Note
+that you'll need to have the XWayland binary installed on your system
+for this to work.
 
-To obtain a debug build, remove `--buildtype=release`.
+##### Man Pages
 
-The release build is reproducible under conditions outlined in [CONTRIBUTING](CONTRIBUTING.md).
+Cagebreak has man pages. To use them, make sure that you have `scdoc`
+installed. Then, add `-Dman-pages=true` to the `meson` command.
 
-### Xwayland Support
+### Running Cagebreak
 
-To build Cagebreak without XWayland support, remove `-Dxwayland=true`.
+You can start Cagebreak by running `./build/cagebreak`. If you run it from
+within an existing X11 or Wayland session, it will open in a virtual output as
+a window in your existing session. If you run it in a TTY, it'll run with the
+KMS+DRM backend. Note that a configuration file is required. For more
+configuration options, see the man pages.
 
-To use XWayland make sure that your version of wlroots is compiled with
-XWayland support.
+Please see `example_scripts/` for example scripts and a basis to customize
+from.
 
-You'll need to have [XWayland](https://archlinux.org/packages/extra/x86_64/xorg-xwayland/) installed for XWayland support to work.
+#### Usage Philosophy
 
-## Running Cagebreak
-
-```
-$ ./build/cagebreak
-```
-
-If you run Cagebreak within an existing X11 or Wayland session, it will
-open in a virtual output as a window in your existing session.
-
-If you run it in a TTY, it'll run with the KMS+DRM backend.
-
-Note that a configuration file is required. For more configuration options, see the [man pages](manuals.md).
-
-Please see `example_scripts/` for a basis to customize from.
-
-### Usage Philosophy
-
-Cagebreak was built to suit the needs of its creators. This outlines
+Cagebreak was originally built to suit the needs of its creators. This section outlines
 how we intended some parts of cagebreak and might ease learning how to use cagebreak a
-little bit. Please note that this does not replace the [man pages](manuals.md) or the [FAQ](FAQ.md).
-Also, this is not intended as a guide on how cagebreak must be used but
-as a source of inspiration and explanation for certain particularities.
+little bit. Please note that this does not replace the man pages or the FAQ.
+Also, this is in no way intended as a guide on how cagebreak must be used but rather
+as a source of inspiration and explanations for certain particularities.
 
 1. Cagebreak is keyboard-based. Everything regarding cagebreak can be done
    through the keyboard and it is our view that it should be. This does not mean
@@ -178,6 +205,467 @@ as a source of inspiration and explanation for certain particularities.
 
 > Example scripts can be found in the repository under `example_scripts/`.
 
+## Contributing
+
+  * Read this document.
+  * Just [open an issue](https://github.com/project-repo/cagebreak/issues/new) and state your feature request.
+    We will consider the proposal and get back to you.
+  * Don't open a pull request without asking first. We might not accept your
+    code and it would be sad to waste the effort.
+  * Respect the [Code of Conduct](CODE_OF_CONDUCT.md) (To date, we never
+    had to intervene - Please keep it that way!)
+
+### Good First Contributions
+
+  * Reviewing the project is always welcome.
+    * Read the code.
+    * Read the documentation.
+    * Test whether the documentation matches the code.
+    * Test Cagebreak in more esoteric setups (many monitors, for instance).
+    * Compile the code.
+  * Ideas on improving the testing and quality assurance are particularly
+    welcome.
+  * If you want, you can share your cagebreak scripts and we might include them
+    in the repository provided you agree to release them under MIT and we agree
+    with the use case and coding style.
+  * Iff you are happy with Cagebreak and use Arch Linux, you may vote for
+    [Cagebreak in the AUR](https://aur.archlinux.org/packages/cagebreak).
+  * The points above still apply.
+
+### Philosophy
+
+Cagebreak is currently developed to fit the needs of its creators.
+
+The feature set is intentionally limited - we removed
+support for a desktop background image for example.
+
+Nonetheless, don't be intimidated by any other part of this file.
+Do your best and we will collaborate toward a solution.
+
+## Development
+
+### Compatibility & Development Distribution
+
+Cagebreak supports [Arch Linux](https://archlinux.org/) and uses the libraries
+(and software versions) as they are obtained through [pacman](https://wiki.archlinux.org/title/Pacman)
+at the time of release. Any other use is out of scope.
+
+However, Cagebreak may also work on other distributions given the
+proper library versions (Some package maintainers have done this and it
+seems to work (To date, we dealt with a few Issues and never felt the
+need to ask for the distribution the user was having the issue on.)).
+
+[![Packaging status](https://repology.org/badge/vertical-allrepos/cagebreak.svg)](https://repology.org/project/cagebreak/versions)
+
+You should use Arch Linux if you want to modify Cagebreak
+for yourself.
+
+### Review Requirements
+
+Project-repo will review your proposal before your implementation for feasibility
+and desirability. After your pull request, the code will be reviewed in conjunction
+with all other changes before the release as per the release procedure.
+
+All reviews performed by project-repo are verified by at least two people internally.
+
+### Developer Certificate of Origin (DCO)
+
+On any pull requests please include a
+
+```
+signed-off-by: YOUR IDENTIFIER OR NAME
+```
+
+DCO statement.
+
+By doing this you claim that you are legally allowed to contribute the
+code and agree to let project-repo publish it under the MIT License.
+
+#### Development Environment
+
+CAVEAT: This script works exclusively on Arch Linux, which, as outlined above,
+is the development distribution of Cagebreak.
+
+Cloning the Cagebreak repository and building it is sufficient as a starting point.
+
+All other dependencies can be installed by invoking
+
+```
+meson compile devel-install -C build
+```
+
+if meson is already available or
+
+```
+./scripts/install-development-environment
+```
+
+otherwise.
+
+#### Scripts
+
+Cagebreak provides a few convenience tools to facilitate development.
+
+##### Fuzzing
+
+If your fuzzing corpus is located in the directory `fuzz_corpus` you can
+just call:
+
+```
+meson compile fuzz -C build
+```
+
+If you want to use a different directory, configure cagebreak with
+`-Dcorpus=OTHERDIRECTORY` or call `./scripts/fuzz OTHERDIRECTORY`.
+
+##### Adjusting Epoch
+
+To facilitate the creation of reproducible man pages an arbitrary release
+time has to be set in `meson.build`:
+
+```
+meson compile adjust-epoch -C build
+```
+
+or
+
+```
+./scripts/adjust-epoch
+```
+
+##### Git tag
+
+If you are on the master branch, everything is ready and you want to create
+a release tag you can call:
+
+```
+meson compile git-tag -C build
+```
+
+If you want to use another signing key than the prespecified one, configure
+Cagebreak with `-Dgpg_id=GPGID`.
+
+```
+./scripts/git-tag GPGID CBVERSION
+```
+
+can be used alternatively.
+
+##### Output Hashes
+
+Hashes of release versions of all binaries can be output to `local-hashes.txt`
+via:
+
+```
+meson compile output-hashes -C build
+```
+
+Or
+
+```
+./scripts/output-hashes VERSION
+```
+
+if meson is unavailable.
+
+##### Create Signatures
+
+Creation of signatures for releases can be achieved through:
+
+```
+meson compile create-sigs -C build
+```
+
+Configure Cagebreak with `-Dgpg_id=GPGID` for a different gpg signing
+key.
+
+Without meson use:
+
+```
+./scripts/create-signatures GPGID
+```
+
+##### Set Version Number
+
+Once the version number is set within meson.build, you can use
+
+```
+meson compile set-ver -C build
+```
+
+to set the version number in the man pages and README repology minversion.
+
+Use of the script without meson is discouraged because meson.build is
+not touched by the script.
+
+##### Create Release Artefacts
+
+The following command generates the release artefacts which must be created
+once a release is completely ready to be published (the commit is tagged with
+the version of the master branch, etc.):
+
+```
+meson compile create-artefacts -C build
+```
+
+Use of the script version is discouraged.
+
+### GCC and -fanalyzer
+
+Cagebreak should compile with any reasonably new gcc or clang. Consider
+a gcc version of at least [10.1](https://gcc.gnu.org/gcc-10/changes.html) if
+you want to get the benefit of the brand-new
+[-fanalyzer](https://gcc.gnu.org/onlinedocs/gcc/Static-Analyzer-Options.html)
+flag. However, this new flag sometimes produces false-postives and we
+selectively disable warnings for affected code segments as described below.
+
+Meson is configured to set `CG_HAS_FANALYZE` if `-fanalyzer` is available.
+Therefore, to maintain portability, false-positive fanalyzer warnings are to be
+disabled using the following syntax:
+
+```
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "WARNING OPTION"
+#endif
+```
+and after
+
+```
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic pop
+#endif
+```
+
+### Test Suite
+
+```
+meson test -C build
+```
+
+invokes all tests. This is required for a release to occur.
+
+There are four test suites:
+
+  * basic: tests actual outward-facing functionality
+    * Note optional dependencies for efficient socket interaction
+      * nc (openbsd-netcat)
+      * jq
+  * devel: tests internal properties of the repository
+    * Note potentially heavier dependencies such as
+      * shellcheck
+      * clang-format
+  * devel-long: applies more costly testing
+    * Note potentially heavier dependencies such as
+      * scan-build (static analysis (including security-relevant issues))
+  * release: tests release specific considerations
+    * Note that this is only expected to pass just before
+      a release. This checks mostly administrative things
+      to check that a release is ready.
+    * Note that non-auto tests are files in `release-non-auto-checks`
+      and have to contain the release version and current date in
+      YYYY-mm-dd format on seperate lines. This is our imperfect attempt
+      to guarantee some hard-to-automate checks are carried out before
+      a release is undertaken.
+
+Every commit should pass at least the basic and devel suites.
+
+It is expected that cagebreak passes at least the
+basic, devel and devel-long suites when commits are pushed:
+
+```
+meson test -C build --suite basic --suite devel
+```
+
+The basic suite can be used to test a binary. This is
+useful for PKGBUILDs and their equivalents in other
+systems.
+
+```
+meson test -C build --suite basic
+```
+
+### Fuzzing
+
+Along with the project source code, a fuzzing framework based on `libfuzzer` is
+supplied. This allows for the testing of the parsing code responsible for reading
+the `cagebreak` configuration file. When `libfuzzer` is available (please
+use the `clang` compiler to enable it), building the fuzz-testing software can
+be enabled by passing `-Dfuzz=true` to meson. This generates a `build/fuzz/fuzz-parse`
+binary according to the `libfuzzer` specifications. Further documentation on
+how to run this binary can be found [here](https://llvm.org/docs/LibFuzzer.html).
+
+Here is an example workflow:
+
+```
+rm -rf build
+CC=clang meson setup build -Dfuzz=true -Db_sanitize=address,undefined -Db_lundef=false
+ninja -C build/
+mkdir build/fuzz_corpus
+cp examples/config build/fuzz_corpus/
+WLR_BACKENDS=headless ./build/fuzz-parse -jobs=12 -max_len=50000 -close_fd_mask=3 build/fuzz_corpus/
+```
+
+You may want to tweak `-jobs` or add other options depending on your own setup.
+We have found code path discovery to increase rapidly when the fuzzer is supplied
+with an initial config file. We are working on improving our fuzzing coverage to
+find bugs in other areas of the code.
+
+#### Caveat
+
+Currently, there are memory leaks which do not seem to stem from our code but rather
+the code of wlroots or some other library we depend on. We are working on the problem.
+In the meantime, add `-Db_detect-leaks=0` to the meson command to exclude memory leaks.
+
+### Reproducible Builds
+
+Cagebreak offers reproducible builds given the exact library versions specified
+in `meson.build`. Should a version mismatch occur, a warning will be emitted. We have
+decided on this compromise to allow flexibility and security. In general we will
+adapt the versions to the packages available under Arch Linux at the time of
+release.
+
+There are reproducibility issues up to and including release `1.2.0`. See
+`Issue 5` in [Bugs.md](Bugs.md).
+
+#### Reproducible Build Instructions
+
+All hashes and signatures are provided for the following build instructions.
+
+```
+meson setup build -Dxwayland=true -Dman-pages=true --buildtype=release
+ninja -C build
+```
+
+#### Hashes for Builds
+
+For every release after 1.0.5, hashes will be provided.
+
+For every release after 1.7.0, hashes will be provided for man pages too.
+
+See [Hashes.md](Hashes.md)
+
+#### GPG Signatures
+
+For every release after 1.0.5, a GPG signature will be provided in `signatures`.
+
+The current signature is called `cagebreak.sig`, whereas all older signatures
+will be named after their release version.
+
+Due to errors in the release process, the releases 1.7.1 and 1.7.2 did not include the release
+signatures in the appropriate folder of the git repository. However, signatures were provided
+as release-artefacts at the time of release. The signatures were introduced into the
+repository with 1.7.3. The integrity of cagebreak is still the same because the signatures were
+provided as release-artefacts (which were themselves signed) and the hashes in Hashes.md
+are part of a signed release tag.
+
+#### Signing Keys
+
+All releases are signed by at least one of the following collection of
+keys.
+
+  * E79F6D9E113529F4B1FFE4D5C4F974D70CEC2C5B
+  * 4739D329C9187A1C2795C20A02ABFDEC3A40545F
+  * 7535AB89220A5C15A728B75F74104CC7DCA5D7A8
+  * 827BC2320D535AEAD0540E6E2E66F65D99761A6F
+  * A88D7431E5BAAD0B6EAE550AC8D61D8BD4FA3C46
+  * 8F872885968EB8C589A32E9539ACC012896D450F
+  * 896B92AF738C974E0065BF42F2576BD366156BB9
+  * AA927AFD50AF7C6810E69FE8274F2C605359E31B
+  * BE2DED372287BC4EB2213E13A0C743848A638955
+  * 0F3476E4B2404F95EC41600683D5810F7911B020
+  * 4E82C72C6B3E58A7BC4FF8554909F84CA83BB867
+  * 5AEB1A2EB0D13F67E306AC59DC0CC81BE006FD85
+
+Should we at any point retire a key, we will only replace it with keys signed
+by at least one of the above collection.
+
+We registered project-repo.co and added mail addresses after release `1.3.0`.
+
+We now have a mail address and its key is signed by signing keys. See [SECURITY.md](SECURITY.md)
+for details.
+
+The full public keys can be found in `keys/` along with any revocation certificates.
+
+### Versioning & Branching Strategy
+
+Cagebreak uses [semantic versioning](https://semver.org).
+
+There are three permanent branches in cagebreak:
+
+  * `master` (for releases)
+  * `development` (for polishing code between releases)
+  * `hotfix` (for small emergent releases, usually up-to-date with master)
+
+Releases are merged to master as per the release procedure, with
+reasonable exceptions as the situation requires.
+
+The release commit is tagged with the release version.
+
+In the past, our git history did not perfectly reflect this scheme.
+
+### Release Procedure
+
+The release procedure outlines the process for a release to occur.
+
+  * [ ] `git checkout development`
+  * [ ] `git pull origin development`
+  * [ ] `git push origin development`
+  * [ ] Arch Build System is up to date
+  * [ ] `meson test -C build/` just to get an overview
+  * [ ] Update internal wiki
+  * [ ] Adjust version number in meson.build
+  * [ ] `meson compile set-ver -C build`
+  * [ ] Add new files to meson.build or hardcoded testing variable
+  * [ ] Commit changes
+  * [ ] `git push origin development`
+  * [ ] Complete relevant documentation
+    * [ ] New features
+      * [ ] tests added and old test scripts adjusted
+      * [ ] man pages
+        * [ ] cagebreak
+        * [ ] cagebreak-config
+        * [ ] cagebreak-socket
+        * [ ] example config
+      * [ ] FAQ.md
+      * [ ] Changelog.md for major and minor releases but not patches
+    * [ ] Check changes for SECURITY.md relevance (changes to socket scope for example)
+      * [ ] Synchronize any socket changes to cagebreak-socket man page
+    * [ ] Document fixed bugs in Bugs.md
+      * [ ] Include issue discussion from github, where applicable
+  * [ ] `meson compile adjust-epoch -C build`
+  * [ ] Commit changes
+  * [ ] `git push origin development`
+  * [ ] Testing
+    * [ ] Manual testing
+    * [ ] `meson compile fuzz -C build` for at least one hour
+  * [ ] Adjust Hashes.md - Use `meson compile output-hashes -C build` to add Hashes or aid in repro check
+  * [ ] Commit changes
+  * [ ] `git push origin development`
+  * [ ] Complete release-non-auto-checks
+  * [ ] `meson compile create-sigs -C build`
+  * [ ] Commit and push signatures, hashes and non-auto-check files
+  * [ ] `meson test -C build` passes everything except some release tests
+  * [ ] `git add` relevant files
+  * [ ] `git commit`
+  * [ ] `git push origin development`
+  * [ ] `git checkout master`
+  * [ ] `git merge --squash development`
+  * [ ] `git commit` and insert message
+  * [ ] `meson compile git-tag -C build`
+  * [ ] `meson compile create-artefacts -C build`
+  * [ ] `meson test -C build` THIS MUST PASS WITHOUT ANY FAILURES WHATSOEVER
+  * [ ] `git push --tags origin master`
+  * [ ] `git checkout development` (merge to development depends on whether release was a hotfix)
+  * [ ] `git merge master`
+  * [ ] `git push --tags origin development`
+  * [ ] `git checkout hotfix` (hotfix is to be kept current with master after releases)
+  * [ ] `git merge master`
+  * [ ] `git push --tags origin hotfix`
+  * [ ] Upload archives and signatures as release assets
+  * [ ] Delete feature branches if appropriate
+  * [ ] Manage package release
+
 ## Roadmap
 
 Cagebreak plans to do or keep doing the following things
@@ -185,24 +673,20 @@ in the future:
 
   * React to all issues.
   * Add or modify features, which the authors find convenient or important.
-  * Improve the [OpenSSF Best Practices Badge Program](https://bestpractices.coreinfrastructure.org/en) level.
+  * Improve the [OpenSSF Best Practices Badge Program](https://bestpractices.coreinfrastructure.org/en) level
 
 ## Governance
 
 Cagebreak is managed by project-repo.
 
-Consider project-repo a single benevolent dictator for life that happens
-to occupy at least two brains.
-
 Project-repo is a pseudonym of at least two individuals acting
 as benevolent dictators for the project by the others mutual consent.
 
 The individuals comprising project-repo are not otherwise associated
 by payment from any organisation or grant.
 
-### Governance Issues
-
-Use [SECURITY.md](SECURITY.md) to contact project-repo.
+For all intents and purposes consider project-repo as a single
+benevolent dictator for life that happens to occupy at least two brains.
 
 ### Roles
 
@@ -212,20 +696,37 @@ There are no specific roles forced unto anyone.
 
 ### Bus Factor
 
-The current bus factor for Cagebreak is: 1
-
 The Bus Factor is a measure of how many people have to be
 incapacitated for a project to be unable to continue.
 
-Project-repo could react to issues (even confidential
+The current bus factor for Cagebreak is: 1
+
+Project-repo could still react to issues (even confidential
 e-mails) and fix easier issues if any one individual were
 incapacitated.
 
 However, not all aspects of the code or release engineering
 are fully resilient to the loss of any one individual.
 
-We strive to increase the bus factor to at least 2 in all
-aspects.
+We strive to improve the Bus Factor to at least two in all
+aspects of Cagebreak.
+
+### Governance Issues
+
+Anyone can use the information in [SECURITY.md](SECURITY.md) to
+contact the members of project-repo and bring governance
+issues to their attention.
+
+## Bugs
+
+For any bug, please [create an issue](https://github.com/project-repo/cagebreak/issues/new) on
+[GitHub](https://github.com/project-repo/cagebreak).
+
+Fixed bugs are to be assigned a number and summarized inside Bugs.md for future reference
+independent of github, in case this service is unavailable.
+
+For other means of contacting the Cagebreak authors and for security issues
+see [SECURITY.md](SECURITY.md).
 
 ## Accessibility
 
@@ -238,14 +739,6 @@ aspects.
     would work and cagebreak does not preclude the use of a screen reader
     for any software run with it.
 
-## Bugs
-
-[Open an issue](https://github.com/project-repo/cagebreak/issues/new) is you find something.
-
-See [SECURITY.md](SECURITY.md) for other means of contacting the Cagebreak authors and security issues.
-
-Fixed bugs are assigned a number and summarized in [Bugs.md](Bugs.md) for future reference.
-
 ## Contributors
 
   * Aisha Tammy
@@ -258,14 +751,10 @@ Fixed bugs are assigned a number and summarized in [Bugs.md](Bugs.md) for future
       released in 2.2.1 with slight modifications
   * Tom Greig
     * Fix bug in merge_output_configs in 2.1.2
-  * sodface
-    * Add a screenshot example script in 2.3.0
-  * Luca Kennedy (unsigned-enby)
-    * [Add option to configure the anchor position of messages](https://github.com/project-repo/cagebreak/pull/61) in 2.3.0
 
 ## License
 
-Copyright (c) 2020-2024 The Cagebreak authors
+Copyright (c) 2020-2023 The Cagebreak authors
 Copyright (c) 2018-2020 Jente Hidskes
 Copyright (c) 2019 The Sway authors
 

SECURITY.md

@@ -1,33 +1,17 @@
 # Security
 
-The main possibility for security bugs in cagebreak is privilege
-escalation via the socket. Any program with access to the socket
-immediately gains arbitrary code execution rights. The socket has to
-be explicitely enabled using the `-e` flag on invocation and
-is restricted to the user of the cagebreak process (700).
+The main possibility for security bugs in cagebreak is by privilege
+escalation through the socket. Any program with access to the socket
+immediately gains arbitrary code execution rights. The socket
+is restricted to the user of the cagebreak process (700) and has to
+be explicitely enabled using the `-e` flag on invocation.
 
-## Email Contact
+If you disagree with this threat model, you may contact us via email (See
+section Email Contact below.) or [open an issue on github](https://github.com/project-repo/cagebreak/issues/new).
 
-If you want to get in touch with project-repo via email, contact
-`cagebreak @ project-repo . co`.
-
-We try to respond to everything that is not obvious spam.
-
-### GPG-Encrypted Emails
-
-If you can, please encrypt your email with the appropriate GPG key found
-in `keys/` and sign your message with your own key.
-
-* B15B92642760E11FE002DE168708D42451A94AB5 (expired)
-* F8DD9F8DD12B85A28F5827C4678E34D2E753AA3C (expired)
-* 3ACEA46CCECD59E4C8222F791CBEB493681E8693 (expired)
-* 0A268C188D7949FEB39FD1462F2AD980247E4918 (soon to expire)
-* [283D10F54201B0C6CCEE2C561DE04E4B056C749D](keys/cagebreak@project-repo.co.pub)
-
-Note that our keys are signed by cagebreak signing keys.
-
-If you want us to respond via GPG-encrypted email, please include your own
-public key or provide the fingerprint and directions to obtain the key.
+Should any problem with the github issue system arise or any other reason
+for (potentially confidential) contact with the Cagebreak authors appear,
+you may contact us via email (See section Email Contact below.).
 
 ## Supported Versions
 
@@ -40,51 +24,77 @@ Builds are reproducible under conditions outlined in [README.md](README.md).
 For normal bugs you may [open an issue on github](https://github.com/project-repo/cagebreak/issues/new).
 
 For everything else, an email contact (with gpg encryption and signature)
-is available above.
+is available below.
+
+## Email Contact
+
+If you want to get in touch with the developers of cagebreak to report
+a security vulnerability or anything else via email, contact
+`cagebreak @ project-repo . co`.
+
+We try to respond to everything that is not obvious spam.
+
+### GPG-Encrypted Emails
+
+If you can, please encrypt your email with the appropriate GPG key found
+in `keys/` and sign your message with your own key.
+
+* B15B92642760E11FE002DE168708D42451A94AB5
+* F8DD9F8DD12B85A28F5827C4678E34D2E753AA3C
+* 3ACEA46CCECD59E4C8222F791CBEB493681E8693
+* 0A268C188D7949FEB39FD1462F2AD980247E4918
+
+Note that our keys are signed by cagebreak signing keys.
+
+If you want us to respond via GPG-encrypted email, please include your own
+public key or provide the fingerprint and directions to obtain the key.
 
 ## Threat Model
 
-Cagebreak is a wayland compositor run by a user and has access to
-the resources the user has access to.
-Cagebreak cannot restrict other programs (consider a web browser
-unable to write a downloaded file for instance).
+Cagebreak is a wayland compositor run by the user of the system
+and thus has access to whichever resources this user has access to.
+Cagebreak can restrict other programs in no way, because this would hamper
+usability (consider a web browser unable to write a downloaded file to disk
+for instance).
 
 There is no transmission of information by cagebreak other than to the
-screens, ipc (if enabled with `-e`) and potentially other documented local channels.
+screens, ipc and potentially other documented local channels.
 
 ### STRIDE Threat List
 
 This is not a thorough analysis, just an overview of the ways in which cagebreak
-has (no) attack surface. Please reference the man pages (especially options -e and --bs ).
+has (no) attack surface. Please reference the man pages for details but especially
+the -e and --bs options.
 
 #### Spoofing
 
-Not applicable - Cagebreak is executed after user login.
+Not applicable - Using Cagebreak already requires a login as a user.
 
 #### Tampering
 
-Not applicable - Cagebreak allows system manipulation for user software.
+Not applicable - Cagebreak must allow system manipulation for user software.
 
 #### Repudiation
 
 Not applicable - There are no prohibited operations (See Tampering above.).
-Cagebreak sends events over documented channels. There is no logging
-activated by default - this can be changed by logging the socket for example.
+While cagebreak does send events over documented channels there is no logging
+activated by default, though, of course, this can be changed by the user
+by logging socket output (if enabled) for example.
 
 #### Information Disclosure
 
-Not applicable - Information disclosure over documented channels is a feature.
-Any user software may exfiltrate any data the user has access to.
+Not applicable - Information disclosure over documented channels is a feature
+and any software run by the user may exfiltrate any data the user has access to.
 
 #### Denial of Service
 
-Not applicable - Cagebreak offers functionality to terminate itself. This is
-available to user software over the socket.
+Not applicable - Cagebreak offers functionality to terminate itself, which is
+available to all user software over the socket if the socket is enabled.
 
 #### Elevation of Privilege
 
-Software may gain arbitrary code execution if it has access to the
-socket. Privilege escalation to root is unlikely since privileges
+Software may gain arbitrary code execution rights if it has access to the
+Cagebreak socket. Privilege escalation to root is unlikely since privileges
 are dropped before any user input is accepted.
 
 ## GPG Keys of the Cagebreak Repository

cagebreak.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _DEFAULT_SOURCE
@@ -27,8 +27,8 @@
 #include <wlr/types/wlr_data_device.h>
 #include <wlr/types/wlr_export_dmabuf_v1.h>
 #include <wlr/types/wlr_gamma_control_v1.h>
+#include <wlr/types/wlr_idle.h>
 #include <wlr/types/wlr_idle_inhibit_v1.h>
-#include <wlr/types/wlr_idle_notify_v1.h>
 #include <wlr/types/wlr_output_layout.h>
 #include <wlr/types/wlr_presentation_time.h>
 #include <wlr/types/wlr_primary_selection_v1.h>
@@ -280,6 +280,7 @@ main(int argc, char *argv[]) {
 	struct wlr_viewporter *viewporter = NULL;
 	struct wlr_presentation *presentation = NULL;
 	struct wlr_xdg_output_manager_v1 *output_manager = NULL;
+	struct wlr_gamma_control_manager_v1 *gamma_control_manager = NULL;
 	struct wlr_xdg_shell *xdg_shell = NULL;
 	wl_list_init(&server.input_config);
 	wl_list_init(&server.output_config);
@@ -356,7 +357,6 @@ main(int argc, char *argv[]) {
 
 	server.message_config.display_time = 2;
 	server.message_config.font = strdup("pango:Monospace 10");
-	server.message_config.anchor = CG_MESSAGE_TOP_RIGHT;
 
 	event_loop = wl_display_get_event_loop(server.wl_display);
 	sigint_source =
@@ -369,8 +369,8 @@ main(int argc, char *argv[]) {
 	    wl_event_loop_add_signal(event_loop, SIGPIPE, handle_signal, &server);
 	server.event_loop = event_loop;
 
-	backend = wlr_backend_autocreate(server.wl_display, &server.session);
-	server.headless_backend = wlr_headless_backend_create(server.wl_display);
+	backend = wlr_backend_autocreate(server.wl_display);
+	server.headless_backend=wlr_headless_backend_create(server.wl_display);
 	if(!backend) {
 		wlr_log(WLR_ERROR, "Unable to create the wlroots backend");
 		ret = 1;
@@ -430,10 +430,9 @@ main(int argc, char *argv[]) {
 		ret = 1;
 		goto end;
 	}
-	server.scene_output_layout =
-	    wlr_scene_attach_output_layout(server.scene, server.output_layout);
+	wlr_scene_attach_output_layout(server.scene, server.output_layout);
 
-	compositor = wlr_compositor_create(server.wl_display, 6, server.renderer);
+	compositor = wlr_compositor_create(server.wl_display, server.renderer);
 	if(!compositor) {
 		wlr_log(WLR_ERROR, "Unable to create the wlroots compositor");
 		ret = 1;
@@ -477,8 +476,14 @@ main(int argc, char *argv[]) {
 		goto end;
 	}
 
+	server.idle = wlr_idle_create(server.wl_display);
+	if(!server.idle) {
+		wlr_log(WLR_ERROR, "Unable to create the idle tracker");
+		ret = 1;
+		goto end;
+	}
+
 	server.idle_inhibit_v1 = wlr_idle_inhibit_v1_create(server.wl_display);
-	server.idle = wlr_idle_notifier_v1_create(server.wl_display);
 	if(!server.idle_inhibit_v1) {
 		wlr_log(WLR_ERROR, "Cannot create the idle inhibitor");
 		ret = 1;
@@ -565,17 +570,13 @@ main(int argc, char *argv[]) {
 		goto end;
 	}
 
-	server.gamma_control =
+	gamma_control_manager =
 	    wlr_gamma_control_manager_v1_create(server.wl_display);
-	if(!server.gamma_control) {
+	if(!gamma_control_manager) {
 		wlr_log(WLR_ERROR, "Unable to create the gamma control manager");
 		ret = 1;
 		goto end;
 	}
-	server.gamma_control_set_gamma.notify =
-	    handle_output_gamma_control_set_gamma;
-	wl_signal_add(&server.gamma_control->events.set_gamma,
-	              &server.gamma_control_set_gamma);
 
 #if CG_HAS_XWAYLAND
 	server.xwayland = wlr_xwayland_create(server.wl_display, compositor, true);
@@ -677,8 +678,6 @@ main(int argc, char *argv[]) {
 		wl_list_init(&server.outputs);
 		struct cg_output *output, *output_tmp;
 		wl_list_for_each_safe(output, output_tmp, &tmp_list, link) {
-			wl_list_remove(&output->link);
-			output_insert(&server, output);
 			output_configure(&server, output);
 		}
 		server.curr_output =
@@ -690,16 +689,14 @@ main(int argc, char *argv[]) {
 
 	wl_display_run(server.wl_display);
 
-#if CG_HAS_XWAYLAND
-	if(server.xwayland != NULL) {
-		wlr_xwayland_destroy(server.xwayland);
-	}
-#endif
-
 	wl_display_destroy_clients(server.wl_display);
 
 end:
 	if(server.modes != NULL) {
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wanalyzer-double-free"
+#endif
 		for(unsigned int i = 0; server.modes[i] != NULL; ++i) {
 			free(server.modes[i]);
 		}
@@ -739,6 +736,11 @@ end:
 	if(server.seat != NULL) {
 		seat_destroy(server.seat);
 	}
+#if CG_HAS_XWAYLAND
+	if(server.xwayland != NULL) {
+		wlr_xwayland_destroy(server.xwayland);
+	}
+#endif
 
 	if(sigint_source != NULL) {
 		wl_event_source_remove(sigint_source);
@@ -765,3 +767,6 @@ end:
 
 	return ret;
 }
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic pop
+#endif

docs/dev-FAQ.md

@@ -1,67 +0,0 @@
-# FAQ for Development
-
-## How is cagebreak adjusted to a new wlroots version?
-
-There are three steps:
-
-1. Try to compile Cagebreak with the new wlroots.
-2. Fix the compiler errors one-by-one using the wlroots
-   changelog for reference (https://gitlab.freedesktop.org/wlroots/wlroots/-/releases).
-3. Debug until Cagebreak works again.
-
-## How do I add a new test?
-
-1. Add a shell script to `test/`
-2. Optionally add test configs to `test/testing-configurations/`
-3. Make sure the files have shebang, copyright and SPDX License identifiers
-   (use the other files for reference)
-4. Add the test to `meson.build` as in the example below.
-5. Add paths and env vars as shown in the other tests
-6. Make sure the test is added to the correct suite
-   (check out CONTRIBUTING.md for details)
-
-```
-test('Scan-build (static analysis)', find_program('test/scan-build'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel-long')
-```
-
-## How do I add a new script?
-
-1. Add a shell script to `scripts/`
-2. Make sure the files have shebang, copyright and SPDX License identifiers
-   (use the other files for reference)
-3. Add the script to CONTRIBUTING.md
-4. Add the script to meson.build as shown below
-
-```
-run_target('create-sigs',
-  command : ['scripts/create-signatures', get_option('gpg_id')])
-```
-
-## How do I add an example script?
-
-Extrapolate from the examples in the `example_scripts` directory.
-
-The script should be executable standalone. See `test/script-header` for a possible
-library.
-
-License, contributors etc. should be appropriate.
-
-Shellcheck must pass on any script (use of shellcheck pragmas is allowed but
-discouraged).
-
-## How do I add a new gpg key?
-
-1. Check which gpg key versions are currently valid.
-2. Generate keys with incremented numbers/emails/dates/passphrase.
-   * Use 4096 Bit RSA Keys
-3. Sign the new keys with at least one then-old signing key.
-4. Genereate new cagebreak@project-repo.co key
-5. Sign the new mail key with the new signing keys.
-6. Generate new pkgbuild key.
-7. Sign the pkgbuild key with the new signing keys.
-8. Add public keys to `keys/`.
-9. Update meson_options.txt
-10. Update [all man pages](../manuals.md), [CONTRIBUTING](../CONTRIBUTING.md), gpg-validity test & [SECURITY.md](../SECURITY.md)
-11. Update the pkgbuild repo with the new key (key and readme).
-12. Update git config email.
-13. Securely distribute private keys and revocation certificates as per the internal wiki.

docs/pull_request_template.md

@@ -1,26 +0,0 @@
-# Description
-
-<!-- Replace this with a description of your pull request. -->
-<!-- Please reference any relevant issues, PRs etc. -->
-
-## Type of Change
-
-  * [ ] Fix
-  * [ ] Backwards-compatible Feature
-  * [ ] Breaking Change
-
-## Considerations
-
-<!-- Replace this with a description of what might be missing, any points of confusion or -->
-<!-- side effects you would like to point out. -->
-
-## Credit
-
-  * [ ] I want to be credited as YOUR_NAME_OR_PSEUDONYM in your contributor section
-  * [ ] I don't want to be credited.
-
-<!-- (by signing off, you state that you are allowed to contribute and allow us to publish -->
-<!-- your contribution under the MIT License) -->
-
-signed-off-by: YOUR_NAME_OR_PSEUDONYM
-

example_scripts/cb_script_header.sh

@@ -1,5 +1,7 @@
-# Copyright 2024, project-repo and the cagebreak contributors
+#!/bin/bash
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
+
 named_pipe_send="$(mktemp -u)"
 named_pipe_recv="$(mktemp -u)"
 mkfifo "${named_pipe_send}"

example_scripts/screenshot_script

@@ -1,44 +0,0 @@
-#!/bin/bash
-# Copyright 2023 - 2024, project-repo, sodface and the cagebreak contributors
-# SPDX-License-Identifier: MIT
-#
-# Execute this script if you want to take a screenshot.
-# Please supply your chosen cropping/editing tool as a
-# command-line argument. The filepath to the temporary
-# file will be given as an argument to your command.
-#
-# Example:
-# screenshot_script "gwenview"
-
-named_pipe_send="$(mktemp -u)"
-named_pipe_recv="$(mktemp -u)"
-mkfifo "${named_pipe_send}"
-mkfifo "${named_pipe_recv}"
-nc -U "${CAGEBREAK_SOCKET}" < "${named_pipe_send}" > "${named_pipe_recv}"&
-# The file descriptor 3 is set up to send commands to cagebreak and file
-# descriptor 4 can be used to read events. Notice that events will pile up in
-# file descriptor 4, so it is a good idea to continuously read from it or to
-# clear it before starting a new transaction.
-exec 3>"${named_pipe_send}"
-exec 4<"${named_pipe_recv}"
-# When the script exits, the os will clean up the pipe
-rm "${named_pipe_recv}"
-rm "${named_pipe_send}"
-
-if [[ ${#} -lt 1 ]]
-then
-        echo "Expected a single command line argument specifying the command to edit the screenshot."
-        exit 1
-fi
-
-edit_cmd="${1}"
-
-echo "dump" >&3
-IFS= read -r -d $'\0' event <&4
-
-co="$(echo "${event:6}"|jq -r ".curr_output")"
-tmpfile="$(mktemp)"
-grim -t png -o "${co}" "${tmpfile}"
-bash -c "${edit_cmd} \"${tmpfile}\""
-wl-copy < "${tmpfile}"
-rm "${tmpfile}"

example_scripts/show_workspace_views.sh

@@ -1,23 +1,11 @@
 #!/bin/bash
-# Copyright 2020 - 2024, project-repo and the cagebreak contributors
+# Copyright 2020 - 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
-#
+
 # This script displays the process names of the views on the current workspace.
 
-named_pipe_send="$(mktemp -u)"
-named_pipe_recv="$(mktemp -u)"
-mkfifo "${named_pipe_send}"
-mkfifo "${named_pipe_recv}"
-nc -U "${CAGEBREAK_SOCKET}" < "${named_pipe_send}" > "${named_pipe_recv}"&
-# The file descriptor 3 is set up to send commands to cagebreak and file
-# descriptor 4 can be used to read events. Notice that events will pile up in
-# file descriptor 4, so it is a good idea to continuously read from it or to
-# clear it before starting a new transaction.
-exec 3>"${named_pipe_send}"
-exec 4<"${named_pipe_recv}"
-# When the script exits, the os will clean up the pipe
-rm "${named_pipe_recv}"
-rm "${named_pipe_send}"
+# Start up the ipc link
+source "$(dirname "${BASH_SOURCE[0]}")/cb_script_header.sh"
 
 echo "dump" >&3
 

examples/config

@@ -1,7 +1,8 @@
-# Copyright 2020 - 2024, project-repo and the cagebreak contributors
+# Copyright 2020 - 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
-
-# General settings and key bindings
+######################
+# General settings an key bindings
+######################
 
 exec xterm
 
@@ -35,21 +36,19 @@ bind k focusup
 bind l focusright
 bind t exec xterm
 bind C-k close
-# bind m message Hello World!
+#bind m message Hello World!
 definekey resize h resizeleft
 definekey resize l resizeright
 definekey resize j resizedown
 definekey resize k resizeup
 definekey resize Escape setmode top
 
-# unhide cursor (default)
+#unhide cursor (default)
 cursor enable
 
-# send a custom event over the socket
-# custom_event Hello World!
-
-## Workspaces
-
+######################
+#Workspaces
+######################
 bind 1 screen 1
 bind 2 screen 2
 bind 3 screen 3
@@ -85,33 +84,28 @@ definekey top XF86_Switch_VT_4 switchvt 4
 definekey top XF86_Switch_VT_5 switchvt 5
 definekey top XF86_Switch_VT_6 switchvt 6
 
-## Bind Function keys
-
+######################
+#Bind Function keys
+######################
 definekey top XF86AudioMute exec pactl set-sink-mute 0 toggle
 definekey top XF86AudioLowerVolume exec pactl set-sink-mute 0 off&&amixer set Master 1%-
 definekey top XF86AudioRaiseVolume exec pactl set-sink-mute 0 off&&amixer set Master 1%+
 definekey top XF86MonBrightnessDown exec xbacklight -dec 1
 definekey top XF86MonBrightnessUp exec xbacklight -inc 1
 
-## Output configuration
+######################
+#Output configuration
+######################
+#output eDP-1 pos 0 0 res 1366x768 rate 60
+#output eDP-1 disable
+#output eDP-1 enable
+#output eDP-1 prio 1
+#output eDP-2 pos 0 0 res 1366x768 rate 60 scale 2.0
 
-# output eDP-1 pos 0 0 res 1366x768 rate 60
-output eDP-1 disable
-output eDP-1 enable
-output eDP-1 permanent
+#####################
+#Input configuration
+#####################
 
-output eDP-1 peripheral
-# output eDP-1 prio 1
-# output eDP-2 pos 0 0 res 1366x768 rate 60 scale 2.0
-
-
-## Input configuration
-
-# input 1234:0:Device_Ident click_method clickfinger
-# input type:pointer scroll_method two_finger
-# input * calibration_matrix 1 2 3 4 5 6
-
-## Message configuration
-
-# configure_message display_time 1
-# configure_message anchor top_center
+#input 1234:0:Device_Ident click_method clickfinger
+#input type:pointer scroll_method two_finger
+#input * calibration_matrix 1 2 3 4 5 6

fuzz/execl_override.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 // This file is used by the fuzzer in order to prevent executing shell commands.
 

fuzz/fuzz-lib.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200812L
@@ -25,9 +25,10 @@
 #include <wlr/types/wlr_data_device.h>
 #include <wlr/types/wlr_export_dmabuf_v1.h>
 #include <wlr/types/wlr_gamma_control_v1.h>
+#include <wlr/types/wlr_idle.h>
 #include <wlr/types/wlr_idle_inhibit_v1.h>
-#include <wlr/types/wlr_idle_notify_v1.h>
 #include <wlr/types/wlr_keyboard_group.h>
+#include <wlr/types/wlr_output_damage.h>
 #include <wlr/types/wlr_output_layout.h>
 #include <wlr/types/wlr_presentation_time.h>
 #include <wlr/types/wlr_primary_selection_v1.h>
@@ -270,10 +271,9 @@ LLVMFuzzerInitialize(int *argc, char ***argv) {
 		ret = 1;
 		goto end;
 	}
-	server.scene_output_layout =
-	    wlr_scene_attach_output_layout(server.scene, server.output_layout);
+	wlr_scene_attach_output_layout(server.scene, server.output_layout);
 
-	compositor = wlr_compositor_create(server.wl_display, 6, server.renderer);
+	compositor = wlr_compositor_create(server.wl_display, server.renderer);
 	if(!compositor) {
 		wlr_log(WLR_ERROR, "Unable to create the wlroots compositor");
 		ret = 1;
@@ -310,7 +310,7 @@ LLVMFuzzerInitialize(int *argc, char ***argv) {
 		goto end;
 	}
 
-	server.idle = wlr_idle_notifier_v1_create(server.wl_display);
+	server.idle = wlr_idle_create(server.wl_display);
 	if(!server.idle) {
 		wlr_log(WLR_ERROR, "Unable to create the idle tracker");
 		ret = 1;

fuzz/fuzz-lib.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_FUZZ_LIB_H

fuzz/fuzz-parse.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200812L

idle_inhibit_v1.c

@@ -1,9 +1,9 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #include <wayland-server-core.h>
+#include <wlr/types/wlr_idle.h>
 #include <wlr/types/wlr_idle_inhibit_v1.h>
-#include <wlr/types/wlr_idle_notify_v1.h>
 
 #include "idle_inhibit_v1.h"
 #include "server.h"
@@ -15,13 +15,20 @@ struct cg_idle_inhibitor_v1 {
 	struct wl_listener destroy;
 };
 
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wanalyzer-malloc-leak"
+#endif
 static void
 idle_inhibit_v1_check_active(struct cg_server *server) {
 	/* As of right now, this does not check whether the inhibitor
 	 * is visible or not.*/
 	bool inhibited = !wl_list_empty(&server->inhibitors);
-	wlr_idle_notifier_v1_set_inhibited(server->idle, inhibited);
+	wlr_idle_set_enabled(server->idle, NULL, !inhibited);
 }
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic pop
+#endif
 
 static void
 handle_destroy(struct wl_listener *listener, void *data) {

idle_inhibit_v1.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 #ifndef CG_IDLE_INHIBIT_H
 #define CG_IDLE_INHIBIT_H

img/archwiki.svg

@@ -1 +0,0 @@
-<svg width="65.4" height="20" viewBox="0 0 654 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : Wiki</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="335" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="235" fill="#000" opacity="0.1">Wiki</text><text x="369" y="138" textLength="235">Wiki</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,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"/></svg>

img/aur.svg

@@ -1 +0,0 @@
-<svg width="65.1" height="20" viewBox="0 0 651 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : AUR</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="332" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="232" fill="#000" opacity="0.1">AUR</text><text x="369" y="138" textLength="232">AUR</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB3aWR0aD0iMjQiIGhlaWdodD0iMjQiIHZpZXdCb3g9IjAgMCAyNCAyNCIgZmlsbD0ibm9uZSIgeG1sbnM9Imh0dHA6Ly93d3cudzMub3JnLzIwMDAvc3ZnIj48cGF0aCBkPSJNNy43NTczNSA1LjYzNjA1TDYuMzQzMTQgNy4wNTAyNkwxMiAxMi43MDcxTDE3LjY1NjkgNy4wNTAyOUwxNi4yNDI3IDUuNjM2MDhMMTIgOS44Nzg3Mkw3Ljc1NzM1IDUuNjM2MDVaIiBmaWxsPSIjZmZmIi8+PHBhdGggZD0iTTYuMzQzMTQgMTIuNzA3MUw3Ljc1NzM1IDExLjI5MjlMMTIgMTUuNTM1NkwxNi4yNDI3IDExLjI5MjlMMTcuNjU2OSAxMi43MDcxTDEyIDE4LjM2NEw2LjM0MzE0IDEyLjcwNzFaIiBmaWxsPSIjZmZmIi8+PC9zdmc+"/></svg>

img/contributing.svg

@@ -1 +0,0 @@
-<svg width="82.2" height="20" viewBox="0 0 822 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : Contrib</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="503" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="403" fill="#000" opacity="0.1">Contrib</text><text x="369" y="138" textLength="403">Contrib</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyNCIgaGVpZ2h0PSIyNCIgdmlld0JveD0iMCAwIDI0IDI0IiBmaWxsPSJub25lIiBzdHJva2U9IiNmZmYiIHN0cm9rZS13aWR0aD0iMiIgc3Ryb2tlLWxpbmVjYXA9InJvdW5kIiBzdHJva2UtbGluZWpvaW49InJvdW5kIj48cGF0aCBkPSJNMjAuMjQgMTIuMjRhNiA2IDAgMCAwLTguNDktOC40OUw1IDEwLjVWMTloOC41eiIvPjxsaW5lIHgxPSIxNiIgeTE9IjgiIHgyPSIyIiB5Mj0iMjIiLz48bGluZSB4MT0iMTcuNSIgeTE9IjE1IiB4Mj0iOSIgeTI9IjE1Ii8+PC9zdmc+"/></svg>

img/faq.svg

@@ -1 +0,0 @@
-<svg width="64.4" height="20" viewBox="0 0 644 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : FAQ</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="325" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="225" fill="#000" opacity="0.1">FAQ</text><text x="369" y="138" textLength="225">FAQ</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyNCIgaGVpZ2h0PSIyNCIgdmlld0JveD0iMCAwIDI0IDI0IiBmaWxsPSJub25lIiBzdHJva2U9IiNmZmYiIHN0cm9rZS13aWR0aD0iMiIgc3Ryb2tlLWxpbmVjYXA9InJvdW5kIiBzdHJva2UtbGluZWpvaW49InJvdW5kIj48cGF0aCBkPSJNMiAzaDZhNCA0IDAgMCAxIDQgNHYxNGEzIDMgMCAwIDAtMy0zSDJ6Ii8+PHBhdGggZD0iTTIyIDNoLTZhNCA0IDAgMCAwLTQgNHYxNGEzIDMgMCAwIDEgMy0zaDd6Ii8+PC9zdmc+"/></svg>

img/mail.svg

@@ -1 +0,0 @@
-<svg width="63.8" height="20" viewBox="0 0 638 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : Mail</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="319" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="219" fill="#000" opacity="0.1">Mail</text><text x="369" y="138" textLength="219">Mail</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyNCIgaGVpZ2h0PSIyNCIgdmlld0JveD0iMCAwIDI0IDI0IiBmaWxsPSJub25lIiBzdHJva2U9IiNmZmYiIHN0cm9rZS13aWR0aD0iMiIgc3Ryb2tlLWxpbmVjYXA9InJvdW5kIiBzdHJva2UtbGluZWpvaW49InJvdW5kIj48cGF0aCBkPSJNNCA0aDE2YzEuMSAwIDIgLjkgMiAydjEyYzAgMS4xLS45IDItMiAySDRjLTEuMSAwLTItLjktMi0yVjZjMC0xLjEuOS0yIDItMnoiLz48cG9seWxpbmUgcG9pbnRzPSIyMiw2IDEyLDEzIDIsNiIvPjwvc3ZnPg=="/></svg>

img/manuals.svg

@@ -1 +0,0 @@
-<svg width="87.1" height="20" viewBox="0 0 871 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : Manuals</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="552" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="452" fill="#000" opacity="0.1">Manuals</text><text x="369" y="138" textLength="452">Manuals</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIyNCIgaGVpZ2h0PSIyNCIgdmlld0JveD0iMCAwIDI0IDI0IiBmaWxsPSJub25lIiBzdHJva2U9IiNmZmYiIHN0cm9rZS13aWR0aD0iMiIgc3Ryb2tlLWxpbmVjYXA9InJvdW5kIiBzdHJva2UtbGluZWpvaW49InJvdW5kIj48cGF0aCBkPSJNMiAzaDZhNCA0IDAgMCAxIDQgNHYxNGEzIDMgMCAwIDAtMy0zSDJ6Ii8+PHBhdGggZD0iTTIyIDNoLTZhNCA0IDAgMCAwLTQgNHYxNGEzIDMgMCAwIDEgMy0zaDd6Ii8+PC9zdmc+"/></svg>

img/web-artefacts.svg

@@ -1 +0,0 @@
-<svg width="75" height="20" viewBox="0 0 750 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : Mirror</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="431" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="331" fill="#000" opacity="0.1">Mirror</text><text x="369" y="138" textLength="331">Mirror</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHZpZXdCb3g9IjAgMCAyNCAyNCI+PGRlZnM+PHN0eWxlPi5jbHMtMXtmaWxsOiNmZmY7b3BhY2l0eTowO30uY2xzLTJ7ZmlsbDojZmZmO308L3N0eWxlPjwvZGVmcz48dGl0bGU+Zm9sZGVyPC90aXRsZT48ZyBpZD0iTGF5ZXJfMiIgZGF0YS1uYW1lPSJMYXllciAyIj48ZyBpZD0iZm9sZGVyIj48ZyBpZD0iZm9sZGVyLTIiIGRhdGEtbmFtZT0iZm9sZGVyIj48cmVjdCBjbGFzcz0iY2xzLTEiIHdpZHRoPSIyNCIgaGVpZ2h0PSIyNCIvPjxwYXRoIGNsYXNzPSJjbHMtMiIgZD0iTTE5LjUsMjAuNUg0LjVBMi40NywyLjQ3LDAsMCwxLDIsMTguMDdWNS45M0EyLjQ3LDIuNDcsMCwwLDEsNC41LDMuNUg5LjFhMSwxLDAsMCwxLC43Ny4zN2wyLjYsMy4xOGg3QTIuNDcsMi40NywwLDAsMSwyMiw5LjQ4djguNTlBMi40NywyLjQ3LDAsMCwxLDE5LjUsMjAuNVoiLz48L2c+PC9nPjwvZz48L3N2Zz4="/></svg>

img/web-open-issue.svg

@@ -1 +0,0 @@
-<svg width="84.4" height="20" viewBox="0 0 844 200" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" role="img"><title> : + Issue</title><g><rect fill="#4a414e" width="319" height="200"/><rect fill="#3373cc" x="319" width="525" height="200"/></g><g aria-hidden="true" fill="#fff" text-anchor="start" font-family="Verdana,DejaVu Sans,sans-serif" font-size="110"><text x="240" y="148" textLength="39" fill="#000" opacity="0.1"></text><text x="230" y="138" textLength="39"></text><text x="379" y="148" textLength="425" fill="#000" opacity="0.1">+ Issue</text><text x="369" y="138" textLength="425">+ Issue</text></g><image x="50" y="35" width="130" height="132" xlink:href="data:image/svg+xml;base64,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"/></svg>

input.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef _CG_INPUT_H

input_manager.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200812L

input_manager.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_INPUT_MANAGER_H

ipc_server.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _DEFAULT_SOURCE

ipc_server.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_IPC_SERVER_H

keybinding.c

@@ -1,9 +1,8 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200809L
 
-#include <signal.h>
 #include <string.h>
 #include <sys/wait.h>
 #include <unistd.h>
@@ -12,6 +11,7 @@
 #include <wlr/backend/session.h>
 #include <wlr/types/wlr_cursor.h>
 #include <wlr/types/wlr_keyboard_group.h>
+#include <wlr/types/wlr_output_damage.h>
 #include <wlr/types/wlr_output_layout.h>
 #include <wlr/types/wlr_scene.h>
 #include <wlr/types/wlr_xcursor_manager.h>
@@ -91,7 +91,6 @@ keybinding_free(struct keybinding *keybinding, bool recursive) {
 		if(keybinding->data.m_cfg->font != NULL) {
 			free(keybinding->data.m_cfg->font);
 		}
-		free(keybinding->data.m_cfg);
 		break;
 	case KEYBINDING_DISPLAY_MESSAGE:
 		if(keybinding->data.c != NULL) {
@@ -508,10 +507,11 @@ keybinding_workspace_fullscreen(struct cg_server *server) {
 
 // Switch to a differerent virtual terminal
 static int
-keybinding_switch_vt(struct cg_server *server, unsigned int vt) {
-	if(wlr_backend_is_multi(server->backend)) {
-		if(server->session) {
-			wlr_session_change_vt(server->session, vt);
+keybinding_switch_vt(struct wlr_backend *backend, unsigned int vt) {
+	if(wlr_backend_is_multi(backend)) {
+		struct wlr_session *session = wlr_backend_get_session(backend);
+		if(session) {
+			wlr_session_change_vt(session, vt);
 		}
 		return 0;
 	}
@@ -630,7 +630,7 @@ keybinding_split_horizontal(struct cg_server *server) {
 
 static void
 into_process(const char *command) {
-	execlp("sh", "sh", "-c", command, (char *)NULL);
+	execl("/bin/sh", "sh", "-c", command, (char *)NULL);
 	_exit(1);
 }
 
@@ -835,50 +835,6 @@ print_str(struct dyn_str *outp, const char *fmt, ...) {
 	return 0;
 }
 
-char *
-print_message_conf(struct cg_message_config *config) {
-	struct dyn_str outp_str;
-	outp_str.len = 0;
-	outp_str.cur_pos = 0;
-	uint32_t nmemb = 7;
-	outp_str.str_arr = calloc(nmemb, sizeof(char *));
-	print_str(&outp_str, "\"message_config\": {");
-	print_str(&outp_str, "\"font\": \"%s\",\n", config->font);
-	print_str(&outp_str, "\"display_time\": %d,\n", config->display_time);
-	print_str(&outp_str, "\"bg_color\": [%f,%f,%f,%f],\n", config->bg_color[0],
-	          config->bg_color[1], config->bg_color[2], config->bg_color[3]);
-	print_str(&outp_str, "\"fg_color\": [%f,%f,%f,%f],\n", config->fg_color[0],
-	          config->fg_color[1], config->fg_color[2], config->fg_color[3]);
-	switch(config->anchor) {
-	case CG_MESSAGE_TOP_LEFT:
-		print_str(&outp_str, "\"anchor\": \"top_left\"\n", config->font);
-		break;
-	case CG_MESSAGE_TOP_CENTER:
-		print_str(&outp_str, "\"anchor\": \"top_center\"\n", config->font);
-		break;
-	case CG_MESSAGE_TOP_RIGHT:
-		print_str(&outp_str, "\"anchor\": \"top_right\"\n", config->font);
-		break;
-	case CG_MESSAGE_BOTTOM_LEFT:
-		print_str(&outp_str, "\"anchor\": \"bottom_left\"\n", config->font);
-		break;
-	case CG_MESSAGE_BOTTOM_CENTER:
-		print_str(&outp_str, "\"anchor\": \"bottom_center\"\n", config->font);
-		break;
-	case CG_MESSAGE_BOTTOM_RIGHT:
-		print_str(&outp_str, "\"anchor\": \"bottom_right\"\n", config->font);
-		break;
-	case CG_MESSAGE_CENTER:
-		print_str(&outp_str, "\"anchor\": \"center\"\n", config->font);
-		break;
-	case CG_MESSAGE_NOPT: // This should actually never occur
-		print_str(&outp_str, "\"anchor\": \"no_op\"\n", config->font);
-		break;
-	}
-	print_str(&outp_str, "}");
-	return dyn_str_to_str(&outp_str);
-}
-
 void
 print_modes(struct dyn_str *str, char **modes) {
 	uint32_t len = 0;
@@ -1062,7 +1018,7 @@ print_output(struct cg_output *outp) {
 	struct dyn_str outp_str;
 	outp_str.len = 0;
 	outp_str.cur_pos = 0;
-	uint32_t nmemb = 10;
+	uint32_t nmemb = 9;
 	outp_str.str_arr = calloc(nmemb, sizeof(char *));
 	print_str(&outp_str, "\"%s\": {\n", outp->name);
 	print_str(&outp_str, "\"priority\": %d,\n", outp->priority);
@@ -1072,9 +1028,7 @@ print_output(struct cg_output *outp) {
 	          outp->wlr_output->width, outp->wlr_output->height);
 	print_str(&outp_str, "\"refresh_rate\": %f,\n",
 	          (float)outp->wlr_output->refresh / 1000.0);
-	print_str(&outp_str, "\"permanent\": %d,\n",
-	          outp->role == OUTPUT_ROLE_PERMANENT);
-	print_str(&outp_str, "\"active\": %d,\n", !outp->destroyed);
+	print_str(&outp_str, "\"permanent\": %d,\n", outp->role == OUTPUT_ROLE_PERMANENT);
 	print_str(&outp_str, "\"curr_workspace\": %d,\n", outp->curr_workspace + 1);
 	char *workspaces_str = print_workspaces(outp);
 	if(workspaces_str != NULL) {
@@ -1228,7 +1182,7 @@ keybinding_dump(struct cg_server *server) {
 	struct dyn_str str;
 	str.len = 0;
 	str.cur_pos = 0;
-	uint32_t nmemb = 14;
+	uint32_t nmemb = 13;
 	str.str_arr = calloc(nmemb, sizeof(char *));
 
 	print_str(&str, "{\"event_name\":\"dump\",");
@@ -1249,11 +1203,6 @@ keybinding_dump(struct cg_server *server) {
 	print_str(&str, "\"default_mode\":\"%s\",\n",
 	          get_mode_name(server->modes, server->seat->default_mode));
 	print_modes(&str, server->modes);
-	char *message_string = print_message_conf(&server->message_config);
-	if(message_string != NULL) {
-		print_str(&str, "%s,", message_string);
-		free(message_string);
-	}
 	char *outps_str = print_outputs(server);
 	if(outps_str != NULL) {
 		print_str(&str, "%s,", outps_str);
@@ -1600,7 +1549,7 @@ keybinding_configure_output(struct cg_server *server,
 	struct cg_output *output, *tmp_output;
 	wl_list_for_each_safe(output, tmp_output, &server->outputs, link) {
 		if(strcmp(config->output_name, output->name) == 0) {
-			int output_num = output_get_num(output);
+			int output_num=output_get_num(output);
 			output_configure(server, output);
 			ipc_send_event(server,
 			               "{\"event_name\":\"configure_output\",\"output\":\"%"
@@ -1666,9 +1615,6 @@ keybinding_configure_message(struct cg_server *server,
 		server->message_config.fg_color[2] = config->fg_color[2];
 		server->message_config.fg_color[3] = config->fg_color[3];
 	}
-	if(config->anchor != CG_MESSAGE_NOPT) {
-		server->message_config.anchor = config->anchor;
-	}
 	ipc_send_event(server, "{\"event_name\":\"configure_message\"}");
 }
 
@@ -1676,11 +1622,11 @@ void
 set_cursor(bool enabled, struct cg_seat *seat) {
 	if(enabled == true) {
 		seat->enable_cursor = true;
-		wlr_cursor_set_xcursor(seat->cursor, seat->xcursor_manager,
-		                       DEFAULT_XCURSOR);
+		wlr_xcursor_manager_set_cursor_image(seat->xcursor_manager,
+		                                     DEFAULT_XCURSOR, seat->cursor);
 	} else {
 		seat->enable_cursor = false;
-		wlr_cursor_unset_image(seat->cursor);
+		wlr_cursor_set_image(seat->cursor, NULL, 0, 0, 0, 0, 0, 0);
 	}
 }
 
@@ -1694,7 +1640,7 @@ run_action(enum keybinding_action action, struct cg_server *server,
 		server->running = false;
 		break;
 	case KEYBINDING_CHANGE_TTY:
-		return keybinding_switch_vt(server, data.u);
+		return keybinding_switch_vt(server->backend, data.u);
 	case KEYBINDING_CURSOR:
 		set_cursor(data.i, server->seat);
 		break;
@@ -1710,10 +1656,6 @@ run_action(enum keybinding_action action, struct cg_server *server,
 	case KEYBINDING_RUN_COMMAND: {
 		int pid;
 		if((pid = fork()) == 0) {
-			setsid();
-			sigset_t set;
-			sigemptyset(&set);
-			sigprocmask(SIG_SETMASK, &set, NULL);
 			if(fork() == 0) {
 				into_process(data.c);
 			}
@@ -1741,9 +1683,9 @@ run_action(enum keybinding_action action, struct cg_server *server,
 		if(data.u != server->seat->default_mode) {
 			wlr_seat_pointer_notify_clear_focus(server->seat->seat);
 			if(server->seat->enable_cursor == true) {
-				wlr_cursor_set_xcursor(server->seat->cursor,
-				                       server->seat->xcursor_manager,
-				                       "dot_box_mask");
+				wlr_xcursor_manager_set_cursor_image(
+				    server->seat->xcursor_manager, "dot_box_mask",
+				    server->seat->cursor);
 			}
 		}
 		server->seat->mode = data.u;

keybinding.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef KEYBINDING_H

keys/cagebreak@project-repo.co.pub

@@ -1,76 +1,87 @@
 -----BEGIN PGP PUBLIC KEY BLOCK-----
 
-mQINBGWVeYABEADshahwFdRpyXb0mYfgvoyKAUYVChjcYRuvMSCBsJ0b+AHc1uu0
-4XomkNN55wxiCOgpZvwkDkUWEQxAbATxyr9ePdxewy4jpDBsovdbi+bUGgQWrQRU
-YR3bZRGoEHK072G20XFQtxSRGDeh1RjyX8q3D+VoVEEJFWONUo//zSZdOgqZQkis
-rnyOj1LyAKtgyLcz4hQ6TTv7YEru8QdRTzd9iGspi24NSQcmEwTvh++N7YN+NWqN
-1QOSICr7mR8m6I4XKh6WPJuK9EDbC+8iuApvLx6A4/SmMYvpU+0ySJVmUa6BHp8T
-mrG0gZGXWcpUoonZ0o38YQfKbTcJGWe25fPkF4mA2nFSACtMrGkBijzctud3Ja7s
-6EK3XmjRT/49P3chnLzydP6dx8H0e1PpN7PWVUFZd16iYZqRww9XE9ibD5bEBur8
-iPmNwPrnenebYnIaIqC5ZJ5AFsD/hK1XOQj2X47Ft+lQgod17iat6OSYLP+29hQl
-fSMntRdBXQUFsBxAgqF/Dw+q2NAkD91oa0TYv5Hbw8TDSCxNf+DAdDIsOv8kxH8S
-YjfiAPnddkr7umIo8IaEs0u769evGxCpWPzs06jPVju15aZEwg7GJuI+EBM56C0J
-Jf485dMgWYonPKsMfhq4Fe+ArtLAOfkzkGXzv3SmyzzNAUd5hCWxo2PWbwARAQAB
-tCxwcm9qZWN0LXJlcG8gPGFyY2hsaW51eC1hdXJAcHJvamVjdC1yZXBvLmNvPokC
-VwQTAQgAQRYhBOfVs1ib/N3qGfPKD8VGZYYFObWyBQJllXmAAhsDBQkB4TOABQsJ
-CAcCAiICBhUKCQgLAgQWAgMBAh4HAheAAAoJEMVGZYYFObWycb4QAM5qWn9xKyru
-6gRUfRZI5mBa2DEaaX5QF5tE+QRgnr7YugGXIHbYWK8zvibB7me9fLRkshrnjjYW
-14YUvIZ79crrbCTLSO2ecrNNWL1YAuzkd2tfJjLBR9w075FwoPjXJ0gZvhwmKgzL
-O1oGUdPvT64//oFH1YPU8asKmz4CeLKnfK78rcUYfEedQ47RHISOIxRhtrRbshsK
-aZO4ZDuUcPItzwEpG4inFzme7xvdJUDvc8OwnmM5w9y3RYT1GVS5+1PzZjl540tz
-Dtvy6uvus7nXrVwfl7aimdlTNXt9mud/FA/60RQ4t2DvMGZACGcAjqSRb3eTrvR1
-cv7/aiHck+4tckhMUoEhWdANpSrHTvgp0gvvqtKCg1fq8KwNaJWt88/9P2j8r8d6
-RXs/p1HOXgjwXxFcpcyjgx2jA5hEek6SdJOM9l/M6uswL0JO9hSuO15LQ692bRcn
-Emy871Zg8ilep7sT4fMkEdaBVpo887Hzo7lGvdzu2C7SETLyZwnKq/kr0iRsVZ3S
-66ThqECC4xZnW8CWX7RiOFTSH/msdsllDYuYFuq/RPFyjgEkwIhq0XtkSMsPqxLJ
-mFL5YYC9fypxSa+79qI/jDZdP4xWeeV/eukyIw98+CqPTwDTI1bLciFVHG3TSxN5
-x5HUs3R9ZSicynazhcdsXVJ6mkJ+nCZEiQIzBBABCAAdFiEEQ4wn3bXRdGc99NZ7
-RRIFs1KMfGMFAmWVe5sACgkQRRIFs1KMfGNF0w//TMnVBQO3lDjHI9Filqlkhs6+
-YkSd7Ed79x0evrv1elGeRdykKWLtC8R12Y8kblFEr5RG+XqHFwpQhxPEr/Kqzjd+
-6LxvPHeErugk95bz5HovOVp8ZDtCEiywZeSdsxllUZ0dAaeY3747MLUM5eDyG5Cf
-KgTzA7v8h4cvnSzfn+iNxjuqkvOFBa4+U7RmpcYVXGvjnxHvFlhd1jPlJlDT03y4
-Qg5a/23VsBQ73nw5g9BLYGdq0Lz6lDR3Nu7uIn+qcC8VJ5GY7XJcY6yml88mUh7m
-87nwIJHclnEIZqxNiyf89LMU9kZHV0Xa5pEQxKhqkKIH9bHjgOQFKtlHfN9ZoFKA
-dxFxLYlcevEeBuOzSudthbS83Dy3YUfrIDlqNUmFEWaiPps+8QCQ2dIjRh9yURjO
-UzvrQNN2HS+lQ/vU9xxAGKSBK7r5GvAR2f/Oumzmihis/+CmX1XvRHA2fXUuaf7R
-OQT0dEEmV2yD6T1sjXPJ6kNdD3/KWVIlYUHzSNIS2YRVep/7zoSEkdvEGZznjeEC
-7buh7dTesnScD989AmThU/ufyFCJK65MfzFOAKabUXUBD42UNYXWBtBaoC6je6YC
-4JpdD00rGzHFQ/GEBXoU7kSaNR8uKysLLNU00w8s8MsuPPuMTQB82yw1TlTMQJwZ
-FdxfSY+Ip+JK2mVTvHqJAjMEEAEIAB0WIQSBNy3bgSQ0nwMDt3RI1+LuM0PjqgUC
-ZZV7rQAKCRBI1+LuM0Pjqh3PEACFy6qClFjyGJ+ZGJ8hE5ljWIBRNAgbT4qpvfXP
-ZV+tuLVJx7+SUOSxfCtd7zBl+l1jyLqKtA4U4+olJiz0BKgypvR4Y3qsERAlztbR
-nce9jSKJLRBZy/2j2Xymu8SjoJUTDYoNYnq2oTorfYsiPErIadIkCWgPP2hmd7ur
-b359K/VinYBhsZ1SaMA0nPRQFFaYrLcSZ6BzxvMmDqM+KrvBGq/PbgL1dD+PX+x4
-70R7YjQo2FsRzbKS+jvTuk8Sv4IlO6KNt8zHrPfrtpmHy/SPRCE7zIgF8VV9wVN8
-deUQWPeXyyV+BPeNqHSkDXGtyeJYvFI0Sn/+3GugwD4XXwqfF8AG2G0Dse6nlfah
-dT1AZQ2z6UMSdLhufGme8eZamwtRIHT/7OSHOdzDEaVPGGThMucW7PBrcqIC7ZKN
-wQBansJ2siqGKjSpKd4SxZvhV9Moz5vK98tBFS301JnEnq4eQW2aLB4LfvqCYFBh
-g/cJ2muv0bCZWQdyU11y4Nunw5mhk3RyjW3X4MH+l9mDo+T5Emg6CFJ39xINZZCN
-EAbUPOUXp5075vgJUr2XEukyBsxo59D+oQRivNLVB5KzrpxgVIPKtGrIl7C3ALA1
-S3UWcTG7G9f89AO1BGPfS7YqV/pVt1bz4r3wLRIiUnYnk7VJODu4eQ8nypRCGDEk
-L4F5hLkCDQRllXmAARAA2LvKKMsLyRtmaoM3I7lG1nDETTToe0wOly1mYeBUIymb
-JUsck68gLo7gOVrDCSVu43gLJVDwdEso1Dml+omh1aNcSYhfvoxbdkNqPA6CvA+E
-zis6YDZq6TQwW/SKHOR32dwvyntsqy7dCsGPDyqyfL9tR6nO5ZTZwU/gznNhzIdV
-mTjTAzFOTBswzExm0dIc/MqJCnwIbCQ6sYuhPoRXBZ1RBAZcxfjR93+dFgBmaSIL
-N4FrsojtulVX0sF+zfQ+U1yK5LEHTEfG2FjHjD9NlWyTNHVC53viCfWT94gfYSXf
-d0jK3C3DTGgcKxlHRyKAOY/4yJcHe3sb7spR9yCZWnig/yG3NQbQXzGIILzkXxyG
-B6FGsp6ASyHQrv72F/h3mlcwkZFG52TT+6JARaDHvAY5qkH/vFzDydQtI6YcmsqD
-myEYo+gt/K8IToNrvz56iDXyKjE66FxhFKXsPW4xUFlXrOTr8n3rHdOtkE2lPBB4
-HnK+iqXgitZLTfCjTaxRk6fhwtdt6d7Ckz3HmTzDLBIony2yK4ntaYbkAJ8Tcqga
-44+W8daaCHcrSyHfG28ok7rVTiGWi1ooe163k2L0xzgLEWM1nFIkl5cVNQ3el9qD
-5QMIcNrVNYp//MtUpwMT37SB7GXI98kaYA6e46pPeVN/YDoEIkQT9a2hYfu7NiEA
-EQEAAYkCPAQYAQgAJhYhBOfVs1ib/N3qGfPKD8VGZYYFObWyBQJllXmAAhsMBQkB
-4TOAAAoJEMVGZYYFObWycmAP/3P6FmUh2BHqNGiIgSBg1AEFoTHKzipswX4cXsDz
-UlI3L/bBBCVaqAGr5Ff5gPYsBDjhWh4qWGtMRFpuyTyvJMsyN942yozSW5dMb2oU
-Mj0ka8JCMGZ/Nmuk9mrrCkzhOOnZxR0W+B4QGZgBuKZQNu6vCD+BMvLtQ313h05R
-DLp3+tiXHXT5Btm1G74iuKcSaYYz3jjGJo+d1eVrvIG+c39L2d0ryHV9KLWq+VuQ
-XcOr6apSDQueQn6b0IfaXAhUMNo1lImxz50z+pFFVAg8zZMTgaG+V6fKV/rUOfOo
-4KD4LKuWnIQErfcPeHbEcc+mPZKtFpeUNTXCo0+9WnLZCCk9M659Vh6JcICbh3Ln
-KtfkxsE3EvuYbghpdMdInnBtB6IHkwh80+Kc1b0iKvWA2Uq00WS9FLyRzbC+Rv2v
-P0kRGskwnYymNue4nCgGYgS3Eu6uTJGxDeUwtG70wcXBoC8Pq9Df78MdhWWG83y7
-nuksxaPoe7wsvIaLbuzsi+AsPYE1zqdzMEfhxS/0MDxlcByy7Fq2WQcBOAFFktYF
-u68mcKvZ5UQuZm4IPnYGIIlhrHPP5SMWmUL4Roh0/KmTPiNFnDH+yRAWwPX3m7Hc
-0j2bX/OGH9XoNw1Zq3Mf15MC2SZp+4uJfGyxmLg7lQghPXWMMqsKtx6mQLoUnGhv
-6arp
-=AorA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+=bl5A
 -----END PGP PUBLIC KEY BLOCK-----

keys/cagebreak@project-repo.co.pub-legacy-4

@@ -1,87 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGQh0wgBEADIIjCM9OkxJiof/YNG3HRzlsbTACuppDJHmg6RTGZb6dKNHt98
-ZLs2pmDdTMslzffoNUTov7e9JymrCNFSlTcw+lHZ0mx6nqVhPKnMEWeN84YwU76m
-qMH99GfNt/j9KYSJuqRINmuoyP2dkj+jgMs8BGnEQsEsfE+ilC8Pgzn0BwH2AuUY
-XdGOkIRPdOZHEjlwBVVUVgrhVUwWY6E+XUCDxiXwbITwozGDuRa630Uvr3ON8q2N
-6GblOjKkSwbnTEjdSGfsoBORol94f2XaOvBXr7BrQW0kiqB00LtcFpQzm7Jd6NF6
-Ch/jP+aHkXiDO7r9EJXzVssJhySJP/r00T4kB2E3tucqj4q/X60eLndWy0b9kf4n
-VnKKsRQ8hZvtBOK9BfCBBYX365msICqpKPFwgb3HefgdCpLN/OBPjerbDeGCbWNB
-bZfT0arLKWbFU/8rYg392PnCydE/9UtXNLUxuIqwOjH62xvHI41hDglq/GH7a71W
-IusqEfPkdmT1+N2VyUCnawIwlmLicGBHWxABrGIlaLHKk0WOw1ZoHADj7h7fTGW5
-GqiA77IjM5OJx1BJeIsiFa41AufK3NKyYa2JEBbhRirTzacMdyrmlrxGXrBVjGfw
-UIFe1Z60Cbf2HGyffjcNIYwDv3Pwwcv56cVkn9mhkIfGsgdKxzjPO96ihwARAQAB
-tChwcm9qZWN0LXJlcG8gPGNhZ2VicmVha0Bwcm9qZWN0LXJlcG8uY28+iQJUBBMB
-CAA+FiEECiaMGI15Sf6zn9FGLyrZgCR+SRgFAmQh0wgCGwMFCQHhM4AFCwkIBwIG
-FQoJCAsCBBYCAwECHgECF4AACgkQLyrZgCR+SRjeEA/+Lw+Xgh5tfczEpW+7oAai
-vE6Jz5Wo308pVGtB/XLGwGlqgbY8MxbSnV7EaEXRNs8u51IRKmZ1IHxG8cu/s6uy
-f6MjFIyxWRxe1flHVkyEsAhj2daL6jm+kkZn2sp90o+f3ByYcW+SVeV7MsHA8Fnk
-eh/giwmg7QqBzTj4O/IbTWa+gMrjj5OaQk9Y+vJffYIrIkNXW445JGIaGbvTQGkM
-mZjaNlzCFI33NabuFhFNbMWyUn9zCu1LlXJPDkcIdewTzEsEy8nvvjKHFlNxe743
-Nb1S0h5gJA6l6aT+X8kQ0xavstRsInR2rV3wHw7bwH4qiY0St6psgwu6EwUpB498
-O50SGSORqL8jDXazIYkyLf4Kp8C1E6PN7CMZNN3aaGATPYck/tCzgOJOGOMDyiDb
-qsh/ANyMsW9/8W2/hTvTv3aEr2dYrUoWOVWRHX4+D4RoK3UDIQHvbq5hULjZI1hY
-rLf6TNPGWSubkZXuCaGuzruCtE+2qdCRMdQcT4wYDZ/RJGG7V2zW4zUpkN+dKwxa
-s3WlrkdGLAmKoMSQYQCbiasfpGU0DOP2/0DEyVp/5/F11r0n2QziTYxLiLdqCpV6
-a4PdGK6r8wUyDcf5pOmWzDE47GHcRWmOiueqMOO/JTvXKENpNIMQhkIa+mp5hmZx
-zX7mB9GON2kyMQOO2RCDRF2JAjMEEAEIAB0WIQS+Le03Ioe8TrIhPhOgx0OEimOJ
-VQUCZCHfHgAKCRCgx0OEimOJVXI/D/9Jb1Emf51shcyIdaiQUOVC/KAJq926cnoO
-rJb+f25a26Z3XR8aU7apU7omBogWoCIgxWbV2PthbYHnGLlImi0W21DgX9fftSzH
-Sw3DjQM+Kn4cq10m12JCX3emn5LvlR59GpkVyPpBGbmYDPB7SidWSBJ6uba5MoiK
-1GPtj+yrJVF/j03U1dWJOkF51LGzxTmdyh32+XDLBNKzdobKBCgUBJHfjtGHSfvy
-aGsO4xAND2ZIZI6T66OCM4+Ip9gsmcoOc1I0XNTrIPmPRsTvlRakVFF3qSQ4Bxwg
-tM87UhfwP/+CG1SB/u9cOgb4K2LdtbeP1Q2eidebYRPzyervVDL96kwPVD1ZtRvC
-R6Kedqe2Fa5eqPRsO83p0B3Bw3ewmzgCZxS7CTEQTodSO0hmYRWzGYvsNlykRK3t
-mxxl1p4XxoaR5VqdYj0NGz/ev3gVWaH+fZSEilEYDBMBjKYppg6N84dsUmw1fcAM
-PMAArYB+49j1DDy3MVjVrpxeFqhU8udFAEaNa4b/rMdFqarbIMCW5NSgjKXHl4JA
-eapIT5LuL8IK9+R+u+mdZyjcDz17XhsDzn6C4qDKmOvvM4WMbpwQd/0FDPEeJM8A
-JXl/SUafaJBCydM3KHs9eD1e9esTZuqvZwvMf46HC27E1skyphifZPLqYZs/WuTI
-qOI91JJSzYkCMwQQAQgAHRYhBE6CxyxrPlinvE/4VUkJ+EyoO7hnBQJkId9hAAoJ
-EEkJ+EyoO7hnJogP/2c/36TiStjOtbClx3SwNqlBbBrU+8PwqJ117xZysjzRqk/p
-Hu6GEwRC5RQFKFBGsl9EtBjUJu6cf0zcR3Qs7QZF5iQS8zGk2lNNZR8RQHgaRoJU
-RBG0I/OkkNGPXNE/8rl2E4wxsPfBN5mYaibJgYBXpWZAJeVaPqua6frQbz79w4md
-00NSUQSHk6t/x+COhU1nYjOLItOAsVQn3o/5A0sS6s3bF8oGSJTilzfmaU+OpSEn
-9ZlulKh6C6lcx0WURQfs4Pjeh1u68GmmwkYIf32V8nOu8wzT5Aig2jE+u36d3doB
-jFKfjmxqEOzSOpJgJH+WARR9Ir3MEwaZ4H6bfUNzAvz4TkBmWNXMUM/8j4rKjR1t
-7h9kIV2w0PlH8mEkBQaSEgxd2rIdTM70pcmmP+WfWBE2gqSUbBqB6M6ZKc2dGb5k
-n/mbj77Gk8Fp8vAZQUFPuKuJuEANlExnr8gFfkVx2MWCUrgGLJznMfEAObNKtfQB
-BGR/8tvYbB0ORflb2DkvJYjKFdmWBwda2EgCcCySiV+gkHfqzC2uNBcvOvYSiW5C
-kOFpfJXQvKMjjF2V4TP7eolZJi4gww6XXxCHz8Ir9mjJKddHeKx9uXU5yMHmn8Uq
-4UfZvuKVwx3yBWi8e2a6lC2xdaOCekNhI9ogXQUfd24NY6KcaxYZVKwbmkmMiQIz
-BBABCAAdFiEEWusaLrDRP2fjBqxZ3AzIG+AG/YUFAmQh39IACgkQ3AzIG+AG/YV8
-Hg//cBJc29r6WAXQQCAivbBOHlCJ/N3c97xrLhMCMeI/jVPFzLCJaQOhBt0AYJqS
-gWMsTLkV1kTMaJLiDg4nNMhJrFZyYzi+AWdqCY14q8yVoYgDG3o4HVGdm+PVQfGo
-jDdzt8TQoCLnz6j0jNmplCc2+Q2JfXEGyCjmL4e4Egb1rK82XQ/Ci8qAzzLUmUZO
-NVOlXKOk9PArsQWBC8c88KaUMELSVuAoXgJzHeU1w7AMyBcG51aOvbMtbQCJBD3W
-bZ6ZW4VrtkU4+3hdQtuFu/dLNF7mOHUBCGtjMw79VUMPR345LVa15H7FCbjdUiNe
-y7n+2QFc39q0upv0teS+Wlu+MXjEWZNJJMTr0psGyD2nJzyT8zC3LK6EKpVA8K/Q
-T5VoedkuB0EBlrsk3O6YHC7cWnnQSzcjhs5JJg1GwmihJ2LwiNyB3DBSfJbCbFnS
-2Ghzx1zDb9chDX7nrCiBdk7SuUY9OJMILr2y3aUsYlGANqN9ReTY7PBeqFPwFuw5
-XWb1AtSZRJoGSiKPkllCltkhZcJWgyBfBRf/hUyr5VJQcVP2/bzL2CdNuptXlbZm
-YGx4PJ4SaXJ989Rurye4ER/6H/o4JSitfaW4BqSY4gBMWHnkM/W6mDG76T/oU1I7
-u6XlvHg0Neni2qnJ39bNCAPbmNgXIi8+qQdI1v3Oj8AFRr+5Ag0EZCHTCAEQALuN
-GvWh5ycGVcFuzmQfR0uiVHeKnhTDHpul0QPIpWH933T7HBitfTvdV8Qi/ZuxWL9V
-S6XJwg8LhnjaA2I/GQ/fdaUgkGMG6S0ouzIcAm55unXPXACfIkgPpfqXaGtwekG8
-AKecdTbPRQHiUeDfHLoiC/AhJdb+AOZepxHNianorE3l0vIyE2MlCYSmf2CgZy7v
-WUt3O1YFLxidFlH6JjKNeHbP30hcQ4IrMow+aY4J49XNRGPGTV+rVCL3SPTTiLtu
-mtKFWzHmHw/NicwApW65fOm7dQeZYcSvhTJwULsYM4PS8niLUSsQ/UMEHNgVih8H
-vj2B+FiHkjqhp7/xDrgzY5bv/QPZ8jRCZDNd93mwOOIhXBWFHVWnpViLFA4dq6ix
-qkXzSBATjdgAU2wqt6WAQjThWWLL5p9V1d1FHp0yPuwNJWBH15Q9u9erzcBBWDS/
-l7Xg93d/QfuW7IQLPnk4506FG3bYW/+GvpNJ8BMeGnbH7p8HY13VnNQhkTmo9gCY
-ZB0h7qpDk3/oJQxscXNFJeuzEW6V82b8MrZoWYZzHLR71WLhpzvd9OSNV9PdXGix
-X5krZ3GlutkyQSRBm5LyJrp6qKklJIlpew7/HmEZ6x/gW79q+AGuFzLEQdeRAOCE
-E6TiY1bvr0MaPAspn5vphVGKNmvsUop3Cs+iVqlZABEBAAGJAjwEGAEIACYWIQQK
-JowYjXlJ/rOf0UYvKtmAJH5JGAUCZCHTCAIbDAUJAeEzgAAKCRAvKtmAJH5JGKso
-D/4mlOCh9y6QNwYE4ZowB3Eges3OSo5+anuV1kk6MUeHGM6B7fOHqblALmDYplJJ
-XG6OdFOgy9Po3EfR7BEmst2La0R4cCePY5tULl+vmF+z090rQYt2wjduvhweScxx
-7c9Exbtt0G37RfYvwyRvSlNWfJSF3EwISm1EYXbTNgrWv1amFqGw0EMYLDzW5F/l
-PHRZicvLSCxgtf+RYO+wrnb9cU3mXcLR9rb51wfVQhg3FMznMZgF/w4jIa4p3ggN
-MQ1TG3+leWnQXOjw/vuuxtZzrF+eKL6Xvw+1Gi+TCm1m91BtTAF6fMUSXENGqUaj
-UUdUqmWSth2prZt4h/6OKZsSbs7jdC/x68nsIJgpWEeCNYBYiQX2lbMXQrPlK+L/
-5yimP/pTsLVtPMJjQifnzxHDrYpinx56tGBPsNWEtwEDIxPfYgBMufyvo1zT9sFK
-XbL53aRT3SxgGmx1RipbQzkGSYY9YykqqaBzpG9qCJD1JZsTHnm3GzbVmbc5Lvi2
-XtVBCpb4LreOCvt1bKroa0kr2atBKnWkOH2LWv5OOxk8wMv/byDWSnX/LRmC8NdP
-twW1upra7Eb+fIVwrau3V18230+yx79JHBz4F+gvYuwVfE/6zqEx8RYLjV5g6hPD
-+riXIhhH3II0vwj9hUP3I8AGdZBR9oV8X4TwlWtZAPAKdw==
-=bl5A
------END PGP PUBLIC KEY BLOCK-----

keys/cagebreak_signing_key_13@project-repo.co.pub

@@ -1,76 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGWUZaEBEACb84wE6iLL+FjnziWKDUR0zeYLth3x10UZS7Yu0zmrZOFlht4M
-OQJ7Fr7aOAu30XRrNWKMaXov5kBIaggpg3vMGT4bL0yoeWoHc39mU2JL78pP1c08
-H+I+KusCcsLtCT07k+YvUWCXYjRtSs/w14SS7Hj5CyMp4NNLqMRkLd4Hcd4CT5qp
-PhlHAULVCEPsALk7krrNLG4XqAwvpvuWZR6FDgdxHHwpu2zI+43cfhZQ3XP88dk0
-WGI+owoD+yYib2xY2+gU5IbHoVNUCF7Zdkf+5a2K1mYU4hkCGQQyx3LBKEa45BVF
-I25uxBQ/elH9r02K3ppAdixqEs+RlL5VFudM3/Cdl04qfgHOxmkNJzSAiZlhoYHw
-uta0o0ynFwYJIi1EUnOAFsrGeE0XcKeT7DXjbAsSqBm1lev7s4ueKvCgfnY5S06k
-JhQZsVFnF7XxW6Ar+32AxEH+8fO1KQUJlenzIupPg03hx2zQ9BxaXnS+3rDzXDaF
-kbFTaHz5ldU1DyqmHaFH9NEZH+2k2b45nmoc2Ts5D24g59+siJzb/mWk/iQCioJ/
-pAFrDuEunHVoXMOlZ43cph3qAy7mjG+KnUY9QSIZl+SsHvJHUJXD3qJkoDPOwQI/
-jro66de7U3WS28z1yPEr5jGkBgnPMEN35QbrGQ2tUPDJl12vJgvU24HpmQARAQAB
-tENDYWdlYnJlYWsgU2lnbmluZyBLZXkgMTMgPGNhZ2VicmVha19zaWduaW5nX2tl
-eV8xM0Bwcm9qZWN0LXJlcG8uY28+iQJXBBMBCABBFiEEQ4wn3bXRdGc99NZ7RRIF
-s1KMfGMFAmWUZaECGwMFCQHhM4AFCwkIBwICIgIGFQoJCAsCBBYCAwECHgcCF4AA
-CgkQRRIFs1KMfGMwUQ//RJZp4b2DgtBlJv7tCXMt+qcUes1nSvVhbhtbfdPGa7K4
-zh51UEYrhFz98fWAtER/ZRVouXNSpnnnR4fsqFP5yJDJWVbVFI7hnqcZ+SB4ojRz
-5A6fnegv7CqgY7Ix8JH26eSahYwpSK2NDgs9ZUvUZk8RsOrke94wi/DaDQXVbnGr
-Uz7/a+Umcg0P9J+3e1CVnTHu/u/NpyNmsqcc0LA6QNKwfZFKtfJ+Kv7xMkIsVIuZ
-lnT5dcXYrTGDjf8IO+1Lr2ecg28ZAlyK69LFASvsnUA+WkUqlm1woZe7eimzRUhp
-yD91d5R4mbrxoEWpU6atf6nam9o5qdr6a7P8iJXmx55oLe35kw7NIPKb9VAVq7Zb
-Fz94F6xnfHNkWhUpiHWcXh3iJkHJgie2WrSstHJjRKpALr7VBhvNb7eykRpIkdnO
-1D4J8Kjp2hRhPReRCoYHtkzixZYg9uxfODsm+rS1nj27R5Y6i0x4RXOdQcSs8V5j
-eb+Lefd6xB7/SX4IkWsBr4f9wgiWL/ZVKvnOhMEaq0TuRb4KPFJ4aflTq7LvzMmG
-wGqQaqzuWsxQdkB4BhfaPZlSrLkV6bOUhTAT25WbgiOsvDjhhUnItX3PR7T7Opcd
-yzfVfJ+0cGm6os9wfZyOQ7aysBaBCQGn/aRlyOIbIdOO+WV0zfaNFeD20Z3le9mJ
-AjMEEAEIAB0WIQROgscsaz5Yp7xP+FVJCfhMqDu4ZwUCZZV7BQAKCRBJCfhMqDu4
-Z/acD/92MiqYEugEo8JszGNugJ6jpoNVSCP8RFiHR2uxyorPx0MCgGcrbUMgpdZc
-gHaCyEWYD9vSOiut3g71H/iY6iACV8L5AaVkkodwKX+YKg0FASdVeu3uekNvHX4D
-GwhX+LMr2E0QYe98mhffCUnuJbPNFY5Oj6eQEJ525t0JxOUHPJ6k3WvgW/lmVsik
-oLVC5iQzz+z96bZ/J+bN0Fgd+bCy7eT3c2I+O0UjtrUr9vBCpW8J/EzkiWVAqaJg
-0tTZOCiQmDTADoSw+g3AhxdU1ilnuB1VDLVhLmijsu51yt6JWeSsB3wU8ga3GpE3
-HDbTBQji6aF6yt/zOtBVTsSNdfDrKUmb0FzfjdLKwUXfZjBaaXxM9LQLRkMqjnBX
-+zqqkIqhRKgKbDT8y5Cq35I5rN6EjL8+Ck/LgeZ1x/wox0l6KLzu8H/rFHclt5VJ
-0yAN0md9ZIDCmVqJQO7EVUQ3s1qU1rDrFjCZViJG9khBNvAZLkjnMx3BeJ9RJS2q
-D3rMpk45A1Y88QS3fnttNGLHwp1sR6LW8FD1qyY0o1cQ09/b3JSkIiF3Bbl/X7Ze
-qgm76Mj4nKcjfXtW15jdn78Hj7S2+yMcuyzexYSdsPVQONOuhkWaruoVH06RLTbT
-MUQbgBaBfQqRaMyTzxkAL/u98seS0Limc9Gwtyttr2q1xy4i3IkCMwQQAQgAHRYh
-BFrrGi6w0T9n4wasWdwMyBvgBv2FBQJllXtBAAoJENwMyBvgBv2Fc/YP/3dgkwXS
-GOii3+rDFp+Xrz8Dp3fwFTjmpxsM+ODXsI0Yf2qVohkmzfrz3cDlpm+rpYu/Mp8/
-Ss5b70XCbFZV4lnPz4jmiOchdcgsZcI29x4u78LPvl3gAVuOWyvcf1SrMFcRM+rh
-YdEp/nugfPk1+9TOWUISUxrLCnR4a1ezg50p7C9TOiPAnLstog2p0rFYrmzBdH5V
-EPU++Znyk0U9vqmH/99kkppY4SU6Pnph/w2at5N+WKLJ9djShaNwpedF5dWJArMj
-Qlem0giTJb3WcKLYzWjhthYeASMg+j9SYVWC3Sgk6kRyBEZeWg7zO/v0ovnTATU5
-34ABMkOTRYZr49qvUlrdleyN36uR7S9o+Gb+41q+EqHlVW4+eaFiNqN//WvuSG1a
-9sNcDDOxTsEqSdhEpy1WCuHGnzlUk/VG2cI4xlNtDWbW4V0P/SYZ4BXasxdkHYCd
-Hgg/81/PL57KlxyqzOEFOB/Fn6wPE/4ElFvcRhe3sLSbq+3OLHQLe/1Vc6Rxmwqx
-KK34TWRZOW5/HM6KCyo6+YeEhaclV0q3GneGg/yvgO7AoMQG8nPxGFyLHgdlfeji
-XEFIA4e4Z74N+Sx0GcyY41xTt9y3/Dg/WdJg6KO7Mqa4ecp44O+kPJz7Q8hZ6yS9
-Pd74UjYivJ2caK5BUc6t3YnP0XSxsGLLkf51uQINBGWUZaEBEADLl3EO9ZabLHbE
-dTESl23Q2MokmHRY69JMNTFhldq6zFjgu4lz1Q9a0YQJQEuXSGFh4h+JXTKHij6y
-IJSE8LZcD7Epd0ko2hbF2etcflFV4j0/2SByfnHLt2oqauhUFCsZZeuTpguysRGI
-mvjhGsCjYi9nBZA42AgukPC/sh1onuVKejYjIZLJKyR47gowJxRSbnOtuSTkppYW
-e/EEF4FJsV35C0t1N1aMvtc5sidVwuaxSVGJflNMGaoKlvoIex+vK1LrSum0Ji3t
-9QfAerYL1ZnyU8dZ63c870vyY0cxFegtv/d9qDohjiUqUYrZ1jIUdY4o/IvDSMhc
-x3iSOB1CB3oIup66oNpnmGP6CAN7UpnnGIYjMWb4eAeVSOHMEEzxdwQl/BEg/K3z
-IbRM1BdCv82WGx0no1FNE/PmFkboHAQMSV+3gbO58aQEBnOROfnxVTG9lK7Ey4uc
-LrZs0nJsvOQxXemQvcTTPL/C2L7y3Hyf2wQO/2JC+Z7cINiYpRuYRS37gwmuC5ik
-P6yu1uLUpjHGpDMPv9yAB4qNUAkfnBT7Et59P0TznnYONwRZ8fVf8KZ8H2HiwpeI
-CjIASrfCRMu4VInKZALYgF0kaqsuZW6LcHYIJ3K4/1GhEfVTDTiRSz1MqtjjRfDw
-Avu3aOe7y2UKEkOaqWDf9a/Zs85ucwARAQABiQI8BBgBCAAmFiEEQ4wn3bXRdGc9
-9NZ7RRIFs1KMfGMFAmWUZaECGwwFCQHhM4AACgkQRRIFs1KMfGPg3w/9Hfu1haNG
-v5CPojVlvfBWGhDdnQiqAAWuQpDwZIZB3CZ7HPBXAInH5J5dR/s3akZdwb6zvxdK
-RuvbkIdw8hFWsc0M3tIIM3mWim9ctB3xYqC4O6gyFdqDNHk4B4j0xrbeSVgp+kPP
-gV5J8rfegY09uxzPKlUgpIf8NRhdE/gLjm5nv1KrIe3G1Bk/0H7RhRkqug5rkAE8
-TfLGrvXkYCWJ0BHU3mivBJt/NaAgj/SF0YbomRPFt5BJzYGU6EEyj+G6AIHrm4np
-88/5ZAqxfb37wtucXJ+IcjHZsEBAuh61xMWHpgxlJ1246+G+FJM1aHlqGbWruNlo
-R6dymqN/kMbN4nKWG3j8549Av03ltpzxaASf4vjDHZ0GziXCovnzGaF9Bt5wyG7v
-TyaUBFxacdtKCgMzGidIvPVrTqLxSr7Dwn8Iz3oZp4yVZpldEuTP5OxA/OP55ym1
-tAPEKVpa9Ui+R+5dwhRWzMxdZ7Ns0OrquFbZ6/rGafqie8fjVmEIoSjd0Ny+/40t
-EGKSx//F90ZPS02ZRqy12rVV/i5Xyt38UCzlegFq9BAsz2IhXkUQSts0EAS3wE2Q
-D+B+0RH+tcL4I8AzyE/LMpHBA7m1hi6kciCOHSzYANvuTJ3na6p0x6YBhcRkPgTD
-XPUssBeVi6uNhWON/EjKc0cLAfNwuBrjj6I=
-=5Ie4
------END PGP PUBLIC KEY BLOCK-----

keys/cagebreak_signing_key_14@project-repo.co.pub

@@ -1,76 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGWUZeUBEAC3tS/7YZznD2QlyIPUqMMxT7475FQqxPCd11OM2I6tc9wjtKqt
-m4l2HvMZ8tiykHNfts/3sgbBW9nsev4NwKV60GFOyFUT+W9IpxuO6ghzbsu+vO1f
-8768GHa8376Ls1y3ujxfOoP7zQsvfs6JJYeFgzPLTLbA/hPciby9hnQcBrBq0vL9
-iSNdMNvvkgQVlhXMnFSR9YapK0KxV6uVPQCKbyD6vuboVQrmn0+RHgX6adMZd9R/
-SO4xIoBvFFdaZb4IH12rtg7MhP+xonDpewP8fVFSLThMB64AfVPv3zJhgGRYhENd
-Yg9+68h98l1BvVHOhuq68/PGeYnWbiNXOwKonBuSDGgekSu3EaixhxWGQd3Irgui
-7a4Dij/Mefu6L+ETK+5AByN57nEaeSMJTVtRUQiB9xPVoptWZAi9WJhuEGpzTbK1
-7bYCGItqixQ0aveVJbUMZ8pD2+TNPQltbKWR9rZc5re+Irt/eWIqgxLjHXA3s/5f
-DOdz6z0JQ/vjvOOg/q7uxRMG/sbNJrWPTuOh2sncrk+bj9d2V9722PVc9TFMhUfw
-UkrqOK1G2fnzanwt/q5uqkeKi1gv1eSFrkJ8d1zcI+fKgbA8LXTNjkW+MliMMxSa
-5Gb2wM/c6vFol6tVve4wObac56uOA+uiiOwQLhOz7yjtMS0D1Lwi+GidXwARAQAB
-tENDYWdlYnJlYWsgU2lnbmluZyBLZXkgMTQgPGNhZ2VicmVha19zaWduaW5nX2tl
-eV8xNEBwcm9qZWN0LXJlcG8uY28+iQJXBBMBCABBFiEEgTct24EkNJ8DA7d0SNfi
-7jND46oFAmWUZeUCGwMFCQHhM4AFCwkIBwICIgIGFQoJCAsCBBYCAwECHgcCF4AA
-CgkQSNfi7jND46qcWBAAoh34oV5jcPyGy/6eMfnptIOY4aYbFTO/oS36fBUwXVUS
-TFJfNYuEJU/z5DBU7Lm3DaAnXHQj9lz0Tuh82b27Gk9ALxZtZTQDlyj1tIg+BlZP
-uSN+mPlvsg8ZVISYnB/vzs/2svL8R0DZcACWrPkDV2U1zPhPbMe2MURv1Zhqpjqn
-j/uGz7jtSFFbs2QqEqW7KG3DDeAbdK6PnVVEsbnDI203ECBwpR+JidI8l5NY+tcF
-ENqIoqZa03FasJWeO1AgcmMwfvZfAro/arUVnxeo85WLeF5uF/IdJo1jRTAucac0
-WME0wB4pqMQ0Q8Snb80oD749g2iwtw8gKhmGhBrT0CtrTQqcsA4r1ITBtF+0vi9j
-FCzgwLM15GYGGetDEql9IL7RSpZJKKqvm7o3qxOBFIMsOmVaQl1VmuwB9GDGERad
-cuPQlVYodPkB816h98Xmv2OgTAoaczKRESQy+qgY6uwvjESX9ltl0mBvruGxMe6E
-SiW52TPjGPaKP8WLXb2OznIiLQnofVPR0KBPNNOfIWPz16E3Due3SYPQwbPwglYR
-AI65v1fHK3WCeBR6mi/bwyajDyn0PQYQvUGyxGRSGu6ljuI0CkElHtX625zIHPkL
-Zjnb/uKW8HXlgLF8fk8g41SCdfYEfhOxxm/165PVSuoN5W7JjZqheS5t7bCzzEeJ
-AjMEEAEIAB0WIQROgscsaz5Yp7xP+FVJCfhMqDu4ZwUCZZV7HgAKCRBJCfhMqDu4
-ZworD/9FOYMpaSkU9qAJQCvsLIcAO68FDOphmnDvJBN7P3aAT9iKsKLlgzXb/RSN
-gC0kQ/dh7CvhXNsGHbtb9A7bngKgb4SaIw9Rot/m/z4AJ7Ihj8llJBz0T5a79njQ
-VQjm3RDOfPHB59mhG7OS3kJJCIZzN+PWJIDrajb0XMaJLifYDMXqKsw5ma+xpU4b
-Ox2PC6rOmi05x35Y+SyXMrUeqia5sHeVby33ropk4BIGq7KIf5kwzVXC9/4aPZlb
-aBBDhoDYHjoUBvt9GS1CzImutq0q9Ofkwx6msqbz5HSLoK58J7IktrgwVxLK1XHr
-wx860zPPef6gk9YgJYUJ6QjzigMV8gB5X3sExB4GF7Xtg92dtGKFsZeqG+NflVhe
-+9zjrDFTCPYOoPEIZUg9JBFkRongJ5xzK/wx0GXMqfrMJACSSxuWKz+iIA6bYIhW
-ayg0cX5uaLdKhZvpK8DcmpAwHMWe8tiRP6BgK6x90aVFXOBhZF4jVW/sZgPEUQUx
-YZfKrm3Ezn9cbBNlg7VQ1rUd3pCvDe0lz+TzsjgMDrLQtTe/FHLFshm+XD/TliZ/
-sQzz+IGsTu0UAdZFhWn1wq0SaNh3hxpm1GOa51KXWxoiF1ym/nFySvN3zj471WBB
-IEAl451qfJRzIiaeRGU26JqY5LGzMaMDGXgDAKgt1w2v4Fa5lYkCMwQQAQgAHRYh
-BFrrGi6w0T9n4wasWdwMyBvgBv2FBQJllXtOAAoJENwMyBvgBv2FZ70QAI184liO
-BT1ZQ3ZsFRD0+kxptxZ4KKPstSiNYCwYSuQNL37HCFa5kDmdyoQr0Mvtj0ohjbNw
-ZQ00cb/nDwXwjk6dhVkuv7ijbh6akKOs7yjzHTxdKUCh+ESZD3kwzSzjO2ccsTn/
-nQqt9rmjxpJSvim6Qc5jlT4WbFNseTYFmyeNYnRtbuJKgXyT3FNfJ2XqkP/Kzvv/
-32uKcVn9Sw4Ab4gpEo5f/ti0iYQBhC5w7T8AGQ+WkaqVg3bWdrJt5qUhRdLqDdON
-OoTGQ9JDfUFk9JPrDdIeZfHYK2cOmn48gIj26zDgEarDgJSGhIHoniP4HvGCpu42
-fUmgBAzTutD29p56umVVX7qt8eZmmf7Vwcu3vYHlxrXDcPaOd7PCHmI4OvXXAc3X
-SKPlCXWf1Amklj2kkPFJplt8SECI+7j0gaSSWriH50y5pOlFmTWpxFlr3ratYsn9
-ZRJ4TA+/xVJTyrcbCfsdsxHc3vIYCC1vz7OuKKn8YqobSHdkmfUPZqw5ZCS3BBfC
-zQMoX8qLUwSonGFLMkZZa17n8VV6GaykSRfyJMjEkcDLGhDqsK/izcR9fLvNYmt9
-lyjjCdrfWLyTvKC8lCCvuY0G2Woeh+Q+R3TTfA09hbBiFTOuHTgSzx4ek8Xq4SFg
-O1ifhT8ao4V0tA2HyEJtjR+M9YZvU2LJvRniuQINBGWUZeUBEADjNBP2cMphSo5i
-Zu2Iad978vaciU1Dpw4BPixLLbN7B9v2wH+2mLXNQ5tyKTuLrEvGl4R6exNIcDTv
-wWKwM8tF+CSQGZ/mP359bwz+ZUGSpOfuu/l3jF2Ka0mspJQbc2s75fGfv6LkCRDO
-qUya53MIZN6o0kIJr60tS5C/qpzv35qke7g5uvxgYhut4MPZj1hOxYJRKO3hm3tN
-Uo6swVHaJG05Hy9U1tJ1BQGDH0xpR0H6GIdQAHoF5X4owfxwEKfv/SKy/8/XnPng
-AFkR4YY1/cwSHdX8xu/86bgFPy+eUU0w0PKs93/Qgn0FQzQ+KU1GZyG4oWGuA6RM
-2CwzMFoxdn1Omj9raYQwlK4MZJFXDYtiSUYXAPO271nCbg09T2uTmuYTYvusJEj/
-aifFKWPrJz1VanOA7dIgUMUQmAVaxZlfDxTN9+qmnNbTUBM9yEp63nmBxyht9EGq
-RSxNBrBhO2MNpNjTm2tzrGbT7UU7cJsDalvVT+4s+Q0bU9caUnaDTNAK31cRMFK5
-zNhB2GPADdLGDYWk9YeEKIlAOPTZghDG3rMs+lb4Itv6TRfv8ymj7AtGWMpOghdN
-hIuaE0PX6XIYyu8JXoxPu9jGN6dXOEsxwDrBfSVgdeoV4B2KMf24P/p/XBOBSSqu
-q5ZhyBVfhfdX6n8zMoXKCiF/LY20RQARAQABiQI8BBgBCAAmFiEEgTct24EkNJ8D
-A7d0SNfi7jND46oFAmWUZeUCGwwFCQHhM4AACgkQSNfi7jND46rMIA//QS+1v6bw
-C0CZa1284hBxqfsU6hQnIV45CQ2S3tUtyfKf6QchKSLPSKSN7A3ywuKyGQwmWTzW
-L2JQY9G9DzlrgaiRMC13594VtDka0sLXq9aZEKTkcO5MXtjDKVsXjlJ5Z5NhYrjl
-C+UFU/GxQk7h8+DW9xSrm9HpVrwF5XWAs7cHrCmFnp90cNJysMzP6WjBaSRksPF1
-Ji1a281luUYwX6mxlKumAEPBj+TyRJVyYaAY2lpJjG78NNyFnLRFCjCBNj784r9C
-5VEHG4w3lzzMfBXLRBU3+YWFsG9XBB5f6ThTr4+iCmupxY1RdWl0kMS0J818lVdd
-G4ZibmEmOdAXs0dQdZZD1LGrzlgH4+xkCT7D65Pd6YFrhdVsRleYdCGNbP1NSaZy
-hYP2rzDt+VV8AUgstscDkvoHWDM0WgueIKQaBVaqp3HOlQ/av9RWglxGlfJlBaWd
-1AU9vOj7W48IKfoxIqByxeUWpTV2C+pMkToDLDd3giWtlu6fhUwn/bwvl4QVnJ+S
-ICUtM1K2xPymTSrajBnkqTin8HOIigAiFo6RyvSv0XD6IQc43y0UnaYDZH7GpF1Z
-6M9mgn15INWAc8kzI/NV1MsRAiRDCixL7gO0dAGZueCO7MgLiGpQB/6dLK8ETfHm
-2rpj+N0DJVi3/r0GWYgBEzvO+yV1ly011sk=
-=AVO4
------END PGP PUBLIC KEY BLOCK-----

libinput.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #include "input.h"

man/cagebreak-config.5.md

@@ -1,8 +1,8 @@
-cagebreak-config(5) "Version 2.3.1" "Cagebreak Manual"
+cagebreak-config(5) "Version 2.2.1" "Cagebreak Manual"
 
 # NAME
 
-*cagebreak-config* Cagebreak configuration file
+*cagebreak-config* — Cagebreak configuration file
 
 # SYNOPSIS
 
@@ -17,8 +17,9 @@ are parsed sequentially but independently from the rest of the file.
 
 Each line starting with a "#" is a comment.
 
-Note that nesting of commands is limited to 50 times.
-Lines are arbitrarily long in practice, though a reasonable limit of 4Mb has been set.
+Note that nesting of commands is limited to 50 times, though lines
+are arbitrarily long in practice, though a reasonable limit of 4Mb has
+been set.
 
 See *KEY DEFINITIONS* for details on modifier keys and *MODES* for details
 on modes.
@@ -28,8 +29,8 @@ on modes.
 *abort*
 	Return to default mode
 
-*background <r\> <g\> <b\>*
-	Set RGB of background - <[r|g|b]\> are floating point numbers
+*background <r> <g> <b>*
+	Set RGB of background - <[r|g|b]> are floating point numbers
 	between 0 and 1.
 	There is no support for background images.
 
@@ -38,8 +39,8 @@ on modes.
 background 1.0 0.0 0.0
 ```
 
-*bind <key\> <command\>*
-	Bind <key\> to execute <command\> if pressed in root mode
+*bind <key> <command>*
+	Bind <key> to execute <command> if pressed in root mode
 
 ```
 bind <key> <command>
@@ -51,17 +52,15 @@ definekey root <key> <command>
 	Close current window - This may be useful for windows of
 	applications which do not offer any method of closing them.
 
-*configure_message [font <font description\>|[f|b]g_color <r\> <g\> <b\> <a\>|display_time <n\>|anchor <position\>]*
+*configure_message [font <font description>|[f|b]g_color <r> <g> b> <a>|display_time <n>]*
 	Configure message characteristics -
-	- font <font description\> sets the font of the message.
-	  Here, <font description\> is either
-	    - an X core font description or
-	    - a FreeType font description via pango
-	- fg_color <r\> <g\> <b\> <a\> sets the RGBA of the foreground
-	- bg_color <r\> <g\> <b\> <a\> sets the RGBA of the background
-	- display_time <n\> sets the display time in seconds
-	- anchor <position\> sets the position of the message.
-      <position\> may be one of {top,bottom}\_{left,center,right} or center.
+	- font <font description> sets
+	  - <font description> is
+	    - X core font description or
+	    - FreeType font description via pango
+	- fg_color <r> <g> <b> <a> sets RGBA of foreground
+	- bg_color <r> <g> <b> <a> sets RGBA of background
+	- display_time <n> sets display time in seconds
 
 ```
 # Set font
@@ -86,20 +85,20 @@ configure_message display_time 4
 	This simply hides the cursor. Pointing and clicking is
 	still possible.
 
-*custom_event <message\>*
+*custom_event <message>*
 	Send a custom event to the IPC socket
 
 	This sends an event of type "custom_event" to all programs
-	listening to the IPC socket along with the string <message\>.
+	listening to the IPC socket along with the string <message>.
 	See *cagebreak-socket(7)* for more details.
 
-*definekey <mode\> <key\> <command\>*
-	Bind <key\> to execute <command\> if pressed in <mode\> -
+*definekey <mode> <key> <command>*
+	Bind <key> to execute <command> if pressed in <mode> -
 	*definekey* is a more general version of *bind*.
 
-*definemode <mode\>*
-	Define new mode <mode\> - After a call to *definemode*,
-	<mode\> can be used with *definekey* to create a custom key mapping.
+*definemode <mode>*
+	Define new mode <mode> - After a call to *definemode*,
+	<mode> can be used with *definekey* to create a custom key mapping.
 
 ```
 # define new mode and create a mapping for it
@@ -110,8 +109,8 @@ definekey foo C-t abort
 *dump*
 	Triggers the *dump* event, see *cagebreak-socket(7)* for details
 
-*escape <key\>*
-	Set <key\> to switch to root mode to execute one command
+*escape <key>*
+	Set <key> to switch to root mode to execute one command
 
 ```
 escape <key>
@@ -131,8 +130,8 @@ definekey top <key> mode root
 *exchangeup*
 	Exchange current window with window in the tile to the top
 
-*exec <command\>*
-	Execute <command\> using *sh -c*
+*exec <command>*
+	Execute <command> using *sh -c*
 
 *focus*
 	Focus next tile
@@ -155,10 +154,10 @@ definekey top <key> mode root
 *hsplit*
 	Split current tile horizontally
 
-*input <identifier\> <setting\> <value\>*
-	Set <setting\> to <value\> for device <identifier\> -
-	<identifier\> can be "\*" (wildcard), of the form
-	"type:<device_type\>" or the identifier of the device as printed
+*input <identifier> <setting> <value>*
+	Set <setting> to <value> for device <identifier> -
+	<identifier> can be "\*" (wildcard), of the form
+	"type:<device_type>" or the identifier of the device as printed
 	for example by *cagebreak -s*. The supported input types are
 	- touchpad
 	- pointer
@@ -175,7 +174,7 @@ definekey top <key> mode root
 	*accel_profile adaptive|flat*
 		Set pointer acceleration profile for specified input device
 
-	*calibration_matrix <6 space-separated floating point values\>*
+	*calibration_matrix <6 space-separated floating point values>*
 		Set calibration matrix
 
 	*click_method none|button_areas|clickfinger*
@@ -208,26 +207,26 @@ definekey top <key> mode root
 		Enable or disable natural (inverted) scrolling for specified
 		input device
 
-	*pointer_accel [<-1|1\>]*
+	*pointer_accel [<-1|1>]*
 		Change the pointer acceleration for specified input device
 
-	*scroll_button disable|<event-code-or-name\>*
+	*scroll_button disable|<event-code-or-name>*
 		Set button used for scroll_method on_button_down - The button
 		can be given as an event name or code, which can be obtained from
 		*libinput debug-events*. If set to _disable_, it disables the
 		scroll_method on_button_down.
 
-	*scroll_factor <floating point value\>*
+	*scroll_factor <floating point value>*
 		Change the scroll factor for the specified input device - Scroll
 		speed will be scaled by the given value, which must be non-negative.
 
 	*scroll_method none|two_finger|edge|on_button_down*
 		Change scroll method for specified input device
 
-	*repeat_delay <n\>*
+	*repeat_delay <n>*
 		Repeat delay in ms for keyboards only
 
-	*repeat_rate <n\>*
+	*repeat_rate <n>*
 		Repeat rate in 1/s for keyboards only
 
 	*tap enabled|disabled*
@@ -239,11 +238,11 @@ definekey top <key> mode root
 		middle click. _lmr_ treats 1 finger as left click, 2 fingers as
 		middle click, and 3 fingers as right click.
 
-message <text\>
+message <text>
 	Display a line of arbitrary text.
 
-*mode <mode\>*
-	Enter mode "<mode\>" - Returns to default mode, after a command is
+*mode <mode>*
+	Enter mode "<mode>" - Returns to default mode, after a command is
 	executed.
 
 *movetonextscreen*
@@ -254,12 +253,12 @@ message <text\>
 	Move currently focused window to previous screen
 	See *output* for differences between screen and output.
 
-*movetoscreen <n\>*
-	Move currently focused window to <n\>-th screen
+*movetoscreen <n>*
+	Move currently focused window to <n>-th screen
 	See *output* for differences between screen and output.
 
-*movetoworkspace <n\>*
-	Move currently focused window to <n\>-th workspace
+*movetoworkspace <n>*
+	Move currently focused window to <n>-th workspace
 	See *output* for differences between screen and output.
 
 *next*
@@ -272,32 +271,32 @@ message <text\>
 *only*
 	Remove all splits and make current window fill the entire screen
 
-*output <name\> [[pos <xpos\> <ypos\> res <width\>x<height\> rate <rate\> [scale <scale\>]] | enable | disable | [permanent|peripheral] | prio <n\> | rotate <n\>]*
-	Configure output "<name\>" -
-	- <xpos\> and <ypos\> are the position of the
+*output <name> [[pos <xpos> <ypos> res <width>x<height> rate <rate> [scale <scale>]] | enable | disable | [permanent|peripheral] | prio <n> | rotate <n>]*
+	Configure output "<name>" -
+	- <xpos> and <ypos> are the position of the
 	  monitor in pixels. The top-left monitor should have the coordinates 0 0.
-	- <width\> and <height\> specify the resolution in pixels.
-	- <rate\> sets the refresh rate of the monitor (often this is 50 or 60).
-	- <scale\> sets the output scale (default is 1.0)
-	- enable and disable enable or disable <name\>. Note that if
-	  <output\> is the only enabled output, *output <output\> disable* has
+	- <width> and <height> specify the resolution in pixels.
+	- <rate> sets the refresh rate of the monitor (often this is 50 or 60).
+	- <scale> sets the output scale (default is 1.0)
+	- enable and disable enable or disable <name>. Note that if
+	  <output> is the only enabled output, *output <output> disable* has
 	  no effect.
-	- permanent sets <name\> to persist even on disconnect. When
-	  the physical monitor is disconnected, the output is
+	- permanent sets <name> to persist even on disconnect. Thus when
+	  the physical monitor is disconnected, the output is nevertheless
 	  maintained and operates identically to the attached monitor. On reconnect,
 	  the monitor operates as though it was never disconnected. Setting the
-	  output role to peripheral when the monitor is disconnected,
+	  output role to peripheral when the monitor is disconnected, immediately
 	  destroys the output, as if the monitor were disconnected.
-	- peripheral sets the role of <name\> to peripheral, meaning that on
+	- peripheral sets the role of <name> to peripheral, meaning that on
 	  disconnecting the respective monitor, all views will be moved to another
 	  available output. The default role is peripheral.
-	- prio <n\> is used to set the priority of an output. If
+	- prio <n> is used to set the priority of an output. If
 	  nothing else is set, outputs are added as they request to be added
-	  and have a numerical priority of -1. Using prio <n\> it is possible
-	  to set priorities for outputs, where <n\> >= 1. The larger <n\> is,
+	  and have a numerical priority of -1. Using prio <n> it is possible
+	  to set priorities for outputs, where <n> >= 1. The larger <n> is,
 	  the higher the priority is, that is to say, the earlier the output
 	  will appear in the list of outputs.
-	- rotate <n\> is used to rotate the output by `<n> mod 4 x 90` degrees
+	- rotate <n> is used to rotate the output by `<n> mod 4 x 90` degrees
 	  counter-clockwise.
 
 ```
@@ -343,19 +342,19 @@ output DP-1 rotate 3
 *resizeup*
 	Resize current tile towards the top
 
-*screen <n\>*
-	Change to <n\>-th screen
+*screen <n>*
+	Change to <n>-th screen
 	See *output* for differences between screen and output.
 
 *show_info*
 	Display information about the current setup - In particular, print the identifiers
 	of the available inputs and outputs.
 
-*setmode <mode\>*
-	Set default mode to <mode\>
+*setmode <mode>*
+	Set default mode to <mode>
 
-*switchvt <n\>*
-	Switch to tty <n\>
+*switchvt <n>*
+	Switch to tty <n>
 
 *time*
 	Display time
@@ -363,11 +362,11 @@ output DP-1 rotate 3
 *vsplit*
 	Split current tile vertically
 
-*workspace <n\>*
-	Change to <n\>-th workspace
+*workspace <n>*
+	Change to <n>-th workspace
 
-*workspaces <n\>*
-	Set number of workspaces to <n\> - <n\> is a single integer larger than 1
+*workspaces <n>*
+	Set number of workspaces to <n> - <n> is a single integer larger than 1
 	and less than 30.
 
 # MODES
@@ -396,7 +395,7 @@ Keys are specified by their names as displayed for example by *xev*.
 
 Modifiers can be specified using the following syntax:
 
-	<mod\>-<key\>
+	<mod>-<key>
 
 The supported modifiers are:
 
@@ -408,7 +407,7 @@ The supported modifiers are:
 
 *S - Shift*
 
-*2 - Mod 2*
+*2 - Mod2*
 
 *3 - Mod 3*
 
@@ -435,12 +434,14 @@ Mail contact: `cagebreak @ project-repo . co`
 
 GPG Fingerprints:
 
+- B15B92642760E11FE002DE168708D42451A94AB5
+- F8DD9F8DD12B85A28F5827C4678E34D2E753AA3C
+- 3ACEA46CCECD59E4C8222F791CBEB493681E8693
 - 0A268C188D7949FEB39FD1462F2AD980247E4918
-- 283D10F54201B0C6CCEE2C561DE04E4B056C749D
 
 # LICENSE
 
-Copyright (c) 2020-2024 The Cagebreak authors
+Copyright (c) 2020-2023 The Cagebreak authors
 
 Copyright (c) 2018-2020 Jente Hidskes
 

man/cagebreak-socket.7.md

@@ -1,8 +1,8 @@
-cagebreak-socket(7) "Version 2.3.1" "Cagebreak Manual"
+cagebreak-socket(7) "Version 2.2.1" "Cagebreak Manual"
 
 # NAME
 
-*cagebreak-socket* Cagebreak socket
+*cagebreak-socket* — Cagebreak socket
 
 # SYNOPSIS
 
@@ -30,10 +30,7 @@ Here is an example of how this works using *only* as a command sent over the soc
 
 ```
 only
-cg-ipc{"event_name":"fullscreen",
-"tile_id":2,
-"workspace":1,
-"output":"eDP-1"}
+cg-ipc{"event_name":"fullscreen","tile_id":2,"workspace":1,"output":"eDP-1"}
 ```
 
 This documentation describes the trigger for the events, the keys and the data
@@ -48,9 +45,7 @@ type of the values of each event.
 
 ```
 background 0 1.0 0
-cg-ipc{"event_name":"background",
-"old_bg":[0.000000,1.000000,1.000000],
-"new_bg":[0.000000,1.000000,0.000000]}
+cg-ipc{"event_name":"background","old_bg":[0.000000,1.000000,1.000000],"new_bg":[0.000000,1.000000,0.000000]}
 ```
 
 *close*
@@ -66,13 +61,7 @@ cg-ipc{"event_name":"background",
 
 ```
 close
-cg-ipc{"event_name":"close",
-"view_id":47,
-"view_pid":30456,
-"tile_id":47,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"close","view_id":47,"view_pid":30456,"tile_id":47,"workspace":1,"output":"eDP-1","output_id":1}
 ```
 
 *configure_input*
@@ -121,13 +110,7 @@ cg-ipc{"event_name":"configure_output","output":"eDP-1","output_id":1}
 
 ```
 # Cursor switches tile
-cg-ipc{"event_name":"cursor_switch_tile",
-"old_output":"eDP-1",
-"old_output_id":1,
-"old_tile":2,
-"new_output":"eDP-1",
-"new_output_id":1,
-"new_tile":3}
+cg-ipc{"event_name":"cursor_switch_tile","old_output":"eDP-1","old_output_id":1,"old_tile":2,"new_output":"eDP-1","new_output_id":1,"new_tile":3}
 ```
 
 *custom_event*
@@ -153,12 +136,7 @@ cg-ipc{"event_name":"custom_event","message":"Hello World!"}
 
 ```
 nextscreen
-cg-ipc{"event_name":"cycle_outputs",
-"old_output":"eDP-1",
-"old_output_id":1,
-"new_output":"HDMI-A-1",
-"new_output_id":2,
-"reverse":0}
+cg-ipc{"event_name":"cycle_outputs","old_output":"eDP-1","old_output_id":1,"new_output":"HDMI-A-1","new_output_id":2,"reverse":0}
 ```
 
 *cycle_views*
@@ -176,15 +154,7 @@ cg-ipc{"event_name":"cycle_outputs",
 
 ```
 next
-cg-ipc{"event_name":"cycle_views",
-"old_view_id":11,
-"old_view_pid":32223,
-"new_view_id":4,
-"old_view_pid";53221,
-"tile_id":13,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"cycle_views","old_view_id":11,"old_view_pid":32223,"new_view_id":4,"old_view_pid";53221,"tile_id":13,"workspace":1,"output":"eDP-1","output_id":1}
 ```
 
 *definekey*
@@ -250,20 +220,12 @@ cg-ipc{"event_name":"destroy_output","output":"HDMI-A-1","output_id":2}
 		- curr_output: current output as a string
 		- default_mode: name of the default mode as a string
 		- modes: list of names of modes as strings
-		- message_config: the current configuration of the cagebreak messages
-			- font: the font used to display the messages
-			- display_time: the duration in seconds that the cagebreak messages are displayed
-			- bg_color: list of four floating point numbers denoting the background color in rgba
-			- fg_color: list of four floating point numbers denoting the foreground color in rgba
-			- anchor: the positioning of the messages on the screen (see *cagebreak-config(5)* for more information)
 		- outputs: object of objects for each output
 			- output name as string
 				- priority: priority as per *output* prio <n> in *cagebreak-config(5)* or default
 				- coords: object of x and y coordinates of output
 				- size: object of width and height as integers
 				- refresh_rate: refresh rate as float
-				- permanent: 0 if peripheral, 1 if permanent
-				- active: 1 if the output is active, 0 if not
 				- curr_workspace: current workspace as an integer
 				- workspaces: list of objects for each workspace
 					- views: list of objects for each view
@@ -296,18 +258,11 @@ cg-ipc{"event_name":"dump","nws":1,
 "curr_output":"eDP-1",
 "default_mode":"top",
 "modes":["top","root","resize"],
-"message_config": {"font": "pango:Monospace 10",
-"display_time": 2,
-"bg_color": [0.900000,0.850000,0.850000,1.000000],
-"fg_color": [0.000000,0.000000,0.000000,1.000000],
-"anchor": "top_right"
-},"outputs": {"eDP-1": {
+"outputs": {"eDP-1": {
 "priority": -1,
 "coords": {"x":0,"y":0},
 "size": {"width":2560,"height":1440},
 "refresh_rate": 60.012000,
-"permanent": 0,
-"active": 1,
 "curr_workspace": 0,
 "workspaces": [{"views": [{
 "id": 16,
@@ -396,12 +351,7 @@ cg-ipc{"event_name":"dump","nws":1,
 
 ```
 focus
-cg-ipc{"event_name":"focus_tile",
-"old_tile_id":14,
-"new_tile_id":13,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"focus_tile","old_tile_id":14,"new_tile_id":13,"workspace":1,"output":"eDP-1","output_id":1}
 ```
 
 *fullscreen*
@@ -415,11 +365,7 @@ cg-ipc{"event_name":"focus_tile",
 
 ```
 only
-cg-ipc{"event_name":"fullscreen",
-"tile_id":3,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"fullscreen","tile_id":3,"workspace":1,"output":"eDP-1","output_id":1}
 ```
 
 *move_view_to_cycle_output*
@@ -435,17 +381,8 @@ cg-ipc{"event_name":"fullscreen",
 
 ```
 movetonextscreen
-cg-ipc{"event_name":"cycle_outputs",
-"old_output":"eDP-1",
-"new_output":"HDMI-A-1",
-"reverse":0}
-cg-ipc{"event_name":"move_view_to_cycle_output",
-"view_id":11,
-"view_pid":43123,
-"old_output":"eDP-1",
-"old_output_id":1,
-"new_output":"HDMI-A-1",
-"new_output_id":2}
+cg-ipc{"event_name":"cycle_outputs","old_output":"eDP-1","new_output":"HDMI-A-1","reverse":0}
+cg-ipc{"event_name":"move_view_to_cycle_output","view_id":11,"view_pid":43123,"old_output":"eDP-1","old_output_id":1,"new_output":"HDMI-A-1","new_output_id":2}
 ```
 
 *move_view_to_output*
@@ -458,13 +395,8 @@ cg-ipc{"event_name":"move_view_to_cycle_output",
 
 ```
 movetoscreen 2
-cg-ipc{"event_name":"switch_output",
-"old_output":"eDP-1",
-"new_output":"HDMI-A-1"}
-cg-ipc{"event_name":"move_view_to_output",
-"view_id":78,
-"old_output":"eDP-1",
-"new_output":"HDMI-A-1"}
+cg-ipc{"event_name":"switch_output","old_output":"eDP-1","new_output":"HDMI-A-1"}
+cg-ipc{"event_name":"move_view_to_output","view_id":78,"old_output":"eDP-1","new_output":"HDMI-A-1"}
 ```
 
 *move_view_to_ws*
@@ -480,17 +412,8 @@ cg-ipc{"event_name":"move_view_to_output",
 
 ```
 movetoworkspace 1
-cg-ipc{"event_name":"switch_ws",
-"old_workspace":1,
-"new_workspace":1,
-"output":"eDP-1"}
-cg-ipc{"event_name":"move_view_to_ws",
-"view_id":43,
-"old_workspace":0,
-"new_workspace":0,
-"output":"eDP-1",
-"output_id":1,
-"view_pid":64908}
+cg-ipc{"event_name":"switch_ws","old_workspace":1,"new_workspace":1,"output":"eDP-1"}
+cg-ipc{"event_name":"move_view_to_ws","view_id":43,"old_workspace":0,"new_workspace":0,"output":"eDP-1","output_id":1,"view_pid":64908}
 ```
 
 *new_output*
@@ -519,19 +442,8 @@ cg-ipc{"event_name":"new_output","output":"HDMI-A-1","output_id":2,"priority":-1
 
 ```
 resizeleft
-cg-ipc{"event_name":"resize_tile",
-"tile_id":14,
-"old_dims":"[1280,0,1440,1280]",
-"new_dims":"[1270,0,1440,1290]",
-"workspace":1,"output":"eDP-1",
-"output_id":1}
-cg-ipc{"event_name":"resize_tile",
-"tile_id":13,
-"old_dims":"[0,0,1440,1280]",
-"new_dims":"[0,0,1440,1270]",
-"workspace":1,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"resize_tile","tile_id":14,"old_dims":"[1280,0,1440,1280]","new_dims":"[1270,0,1440,1290]","workspace":1,"output":"eDP-1","output_id":1}
+cg-ipc{"event_name":"resize_tile","tile_id":13,"old_dims":"[0,0,1440,1280]","new_dims":"[0,0,1440,1270]","workspace":1,"output":"eDP-1","output_id":1}
 ```
 
 *set_nws*
@@ -559,13 +471,7 @@ cg-ipc{"event_name":"set_nws","old_nws":1,"new_nws":2}
 
 ```
 hsplit
-cg-ipc{"event_name":"split",
-"tile_id":11,
-"new_tile_id":12,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1,
-"vertical":0}
+cg-ipc{"event_name":"split","tile_id":11,"new_tile_id":12,"workspace":1,"output":"eDP-1","output_id":1,"vertical":0}
 ```
 
 *swap_tile*
@@ -582,13 +488,7 @@ cg-ipc{"event_name":"split",
 
 ```
 exchangeright
-cg-ipc{"event_name":"swap_tile",
-"tile_id":1,
-"tile_pid":53478,
-"swap_tile_id":3,
-"swap_tile_pid":98234,
-"workspace":1,
-"output":"eDP-1"}
+cg-ipc{"event_name":"swap_tile","tile_id":1,"tile_pid":53478,"swap_tile_id":3,"swap_tile_pid":98234,"workspace":1,"output":"eDP-1"}
 ```
 
 *switch_default_mode*
@@ -614,11 +514,7 @@ switch_output
 
 ```
 screen 2
-cg-ipc{"event_name":"switch_output",
-"old_output":"eDP-1",
-"old_output_id":1,
-"new_output":"HDMI-A-1",
-"new_output_id":2}
+cg-ipc{"event_name":"switch_output","old_output":"eDP-1","old_output_id":1,"new_output":"HDMI-A-1","new_output_id":2}
 ```
 
 switch_ws
@@ -632,11 +528,7 @@ switch_ws
 
 ```
 workspace 2
-cg-ipc{"event_name":"switch_ws",
-"old_workspace":1,
-"new_workspace":2,
-"output":"eDP-1",
-"output_id":1}
+cg-ipc{"event_name":"switch_ws","old_workspace":1,"new_workspace":2,"output":"eDP-1","output_id":1}
 ```
 
 *view_map*
@@ -652,13 +544,7 @@ cg-ipc{"event_name":"switch_ws",
 
 ```
 # process opens a view
-cg-ipc{"event_name":"view_map",
-"view_id":28,
-"tile_id":14,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1,
-"view_pid":39827}
+cg-ipc{"event_name":"view_map","view_id":28,"tile_id":14,"workspace":1,"output":"eDP-1","output_id":1,"view_pid":39827}
 ```
 
 *view_unmap*
@@ -674,13 +560,7 @@ cg-ipc{"event_name":"view_map",
 
 ```
 # view is closed by the process
-cg-ipc{"event_name":"view_unmap",
-"view_id":24,
-"tile_id":13,
-"workspace":1,
-"output":"eDP-1",
-"output_id":1,
-"view_pid":39544}
+cg-ipc{"event_name":"view_unmap","view_id":24,"tile_id":13,"workspace":1,"output":"eDP-1","output_id":1,"view_pid":39544}
 ```
 
 ## SECURITY
@@ -710,12 +590,14 @@ Mail contact: `cagebreak @ project-repo . co`
 
 GPG Fingerprints:
 
+- B15B92642760E11FE002DE168708D42451A94AB5
+- F8DD9F8DD12B85A28F5827C4678E34D2E753AA3C
+- 3ACEA46CCECD59E4C8222F791CBEB493681E8693
 - 0A268C188D7949FEB39FD1462F2AD980247E4918
-- 283D10F54201B0C6CCEE2C561DE04E4B056C749D
 
 # LICENSE
 
-Copyright (c) 2022 - 2024 The Cagebreak authors
+Copyright (c) 2022 - 2023 The Cagebreak authors
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of
 this software and associated documentation files (the "Software"), to deal in

man/cagebreak.1.md

@@ -1,4 +1,4 @@
-cagebreak(1) "Version 2.3.1" "Cagebreak Manual"
+cagebreak(1) "Version 2.2.1" "Cagebreak Manual"
 
 # NAME
 
@@ -28,7 +28,7 @@ socket specified in the environment variable *\$CAGEBREAK_SOCKET*.
 The syntax accepted through this socket is identical to
 that of the configuration file (see *cagebreak-config(5)*).
 Errors which occur during interaction over IPC channel
-are displayed in a message box on the screen.
+are displayed in a message box at the top right of the screen.
 
 # OPTIONS
 
@@ -87,12 +87,14 @@ Mail contact: `cagebreak @ project-repo . co`
 
 GPG Fingerprints:
 
+- B15B92642760E11FE002DE168708D42451A94AB5
+- F8DD9F8DD12B85A28F5827C4678E34D2E753AA3C
+- 3ACEA46CCECD59E4C8222F791CBEB493681E8693
 - 0A268C188D7949FEB39FD1462F2AD980247E4918
-- 283D10F54201B0C6CCEE2C561DE04E4B056C749D
 
 # LICENSE
 
-Copyright (c) 2020-2024 The Cagebreak authors
+Copyright (c) 2020-2023 The Cagebreak authors
 
 Copyright (c) 2018-2020 Jente Hidskes
 

manuals.md

@@ -1,5 +0,0 @@
-# Cagebreak Manuals
-
-  * [cagebreak-config (5)](man/cagebreak-config.5.md) (probably, what you are looking for, commands etc.)
-  * [cagebreak (1)](man/cagebreak.1.md) (command line arguments, environment variables etc.)
-  * [cagebreak-socket (7)](man/cagebreak-socket.7.md) (mostly useful for scripting, socket information)

meson.build

@@ -1,9 +1,9 @@
-# Copyright 2020 - 2024, project-repo and the cagebreak contributors
+# Copyright 2020 - 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 project(
   'cagebreak',
   'c',
-version : '2.3.1',
+version : '2.2.1',
 license : 'MIT',
 default_options : ['c_std=c11', 'warning_level=3']
 )
@@ -55,7 +55,7 @@ if is_freebsd
   )
 endif
 
-wlroots        = dependency('wlroots', version: ['>=0.17.0', '< 0.18.0'])
+wlroots        = dependency('wlroots', version: ['>=0.16.1', '< 0.17.0'])
 wayland_protos = dependency('wayland-protocols', version: '>=1.14')
 wayland_server = dependency('wayland-server')
 wayland_cursor = dependency('wayland-cursor')
@@ -204,15 +204,15 @@ reproducible_build_versions = {
   'wayland_server': '1.19.0',
   'wayland_client': '1.22.0',
   'wayland_cursor': '1.22.0',
-  'wlroots': '0.17.1',
-  'xkbcommon': '1.6.0',
-  'fontconfig': '2.15.0',
-  'libinput': '1.25.0',
+  'wlroots': '0.16.2',
+  'xkbcommon': '1.5.0',
+  'fontconfig': '2.14.2',
+  'libinput': '1.23.0',
   'libevdev': '1.13.1',
-  'libudev': '255',
-  'pango': '1.51.0',
-  'cairo': '1.18.0',
-  'pangocairo': '1.51.0',
+  'libudev': '254',
+  'pango': '1.50.14',
+  'cairo': '1.17.8',
+  'pangocairo': '1.50.14',
   'math': '-1'
 }
 
@@ -260,7 +260,7 @@ install_data('LICENSE', install_dir : '/usr/share/licenses/' + meson.project_nam
 
 if get_option('man-pages')
   scdoc = find_program('scdoc')
-  secssinceepoch = 1706350970
+  secssinceepoch = 1692353837
   shcommand = 'export SOURCE_DATE_EPOCH=' + secssinceepoch.to_string() + ' ; @0@ < @INPUT@'.format(scdoc.path())
   sh = find_program('sh')
   mandir1 = join_paths(get_option('mandir'), 'man1')
@@ -371,16 +371,12 @@ run_target('create-artefacts',
 # Test Suite
 
 test('Build without warnings', find_program('test/build-w-o-warnings'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Example script header is consistent', find_program('test/script-header'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Script executability is consistent', find_program('test/script-header'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Man page consistency', find_program('test/man-pages'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
 test('Build without xwayland', find_program('test/build-w-o-xwayland'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
 test('Copyright and LICENSE', find_program('test/copyright-license'), args : [ cagebreak_main_file + cagebreak_source_strings + cagebreak_header_strings + fuzz_sources + fuzz_headers + fuzz_override_lib ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()), ''.join('MESONLICENSE=', meson.project_license())], suite: 'devel' )
-test('Formatting check (clang-format)', find_program('test/clang-format'), args : [ cagebreak_main_file + cagebreak_source_strings + cagebreak_header_strings + fuzz_sources + fuzz_headers + fuzz_override_lib ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Script linting (shellcheck)', find_program('test/shellcheck'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
+test('Clang-format (formatting check)', find_program('test/clang-format'), args : [ cagebreak_main_file + cagebreak_source_strings + cagebreak_header_strings + fuzz_sources + fuzz_headers + fuzz_override_lib ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
+test('Shellcheck (script linting)', find_program('test/shellcheck'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
 test('GPG key validity', find_program('test/gpg-validity'), args : [ meson.project_version() ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Illegal Strings', find_program('test/illegal-strings'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel')
-test('Static analysis (scan-build)', find_program('test/scan-build'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel-long')
+test('Scan-build (static analysis)', find_program('test/scan-build'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'devel-long')
 test('Arguments', find_program('test/arguments'), args : [ meson.project_version() ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'basic')
 test('Environment Variables', find_program('test/environment-variables'), env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'basic')
 test('Semantic versioning', find_program('test/versions'), args : [ meson.project_version() ], env : [ ''.join('MESONCURRENTCONFIGDIR=', meson.current_source_dir()) ], suite: 'release')

meson_options.txt

@@ -1,8 +1,8 @@
-# Copyright 2020 - 2024, project-repo and the cagebreak contributors
+# Copyright 2020 - 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 option('xwayland', type: 'boolean', value: 'false', description: 'Enable support for X11 applications')
 option('man-pages', type: 'boolean', value: 'false', description: 'Build man pages (requires pandoc)')
 option('fuzz', type: 'boolean', value: 'false', description: 'Enable building fuzzer targets')
 option('version_override', type: 'string', description: 'Set the project version to the string specified. Used for creating hashes for reproducible builds.')
 option('corpus', type: 'string', value: 'fuzz_corpus',  description: 'Set fuzzing corpus directory')
-option('gpg_id', type: 'string', value: '438C27DDB5D174673DF4D67B451205B3528C7C63',  description: 'Set gpg signing key for cagebreak')
+option('gpg_id', type: 'string', value: '4E82C72C6B3E58A7BC4FF8554909F84CA83BB867',  description: 'Set gpg signing key for cagebreak')

message.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #include <cairo/cairo.h>
@@ -12,6 +12,7 @@
 #include <wlr/render/allocator.h>
 #include <wlr/render/drm_format_set.h>
 #include <wlr/render/wlr_renderer.h>
+#include <wlr/types/wlr_output_damage.h>
 #include <wlr/types/wlr_output_layout.h>
 #include <wlr/types/wlr_scene.h>
 #include <wlr/util/log.h>
@@ -174,9 +175,13 @@ create_message_texture(const char *string, const struct cg_output *output) {
 	return buf;
 }
 
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wanalyzer-malloc-leak"
+#endif
 void
 message_set_output(struct cg_output *output, const char *string,
-                   struct wlr_box *box, enum cg_message_anchor anchor) {
+                   struct wlr_box *box, enum cg_message_align align) {
 	struct cg_message *message = malloc(sizeof(struct cg_message));
 	if(!message) {
 		wlr_log(WLR_ERROR, "Error allocating message structure");
@@ -198,35 +203,26 @@ message_set_output(struct cg_output *output, const char *string,
 	int height = buf->base.height / scale;
 	message->position->width = width;
 	message->position->height = height;
-	switch(anchor) {
-	case CG_MESSAGE_TOP_LEFT:
-		message->position->x = 0;
-		message->position->y = 0;
-		break;
-	case CG_MESSAGE_TOP_CENTER:
-		message->position->x -= width / 2;
-		message->position->y = 0;
-		break;
-	case CG_MESSAGE_TOP_RIGHT:
+	switch(align) {
+	case CG_MESSAGE_TOP_RIGHT: {
 		message->position->x -= width;
-		message->position->y = 0;
 		break;
-	case CG_MESSAGE_BOTTOM_LEFT:
-		message->position->x = 0;
+	}
+	case CG_MESSAGE_BOTTOM_LEFT: {
 		message->position->y -= height;
 		break;
-	case CG_MESSAGE_BOTTOM_CENTER:
-		message->position->x -= width / 2;
-		message->position->y -= height;
-		break;
-	case CG_MESSAGE_BOTTOM_RIGHT:
+	}
+	case CG_MESSAGE_BOTTOM_RIGHT: {
 		message->position->x -= width;
 		message->position->y -= height;
 		break;
-	case CG_MESSAGE_CENTER:
+	}
+	case CG_MESSAGE_CENTER: {
 		message->position->x -= width / 2;
 		message->position->y -= height / 2;
 		break;
+	}
+	case CG_MESSAGE_TOP_LEFT:
 	default:
 		break;
 	}
@@ -267,51 +263,22 @@ message_printf(struct cg_output *output, const char *fmt, ...) {
 		free(buffer);
 		return;
 	}
-	struct wlr_box output_box = output_get_layout_box(output);
+	box->x = output_get_layout_box(output).width;
+	box->y = 0;
 	box->width = 0;
 	box->height = 0;
-	switch(output->server->message_config.anchor) {
-	case CG_MESSAGE_TOP_LEFT:
-		box->x = 0;
-		box->y = 0;
-		break;
-	case CG_MESSAGE_TOP_CENTER:
-		box->x = output_box.width / 2;
-		box->y = 0;
-		break;
-	case CG_MESSAGE_TOP_RIGHT:
-		box->x = output_box.width;
-		box->y = 0;
-		break;
-	case CG_MESSAGE_BOTTOM_LEFT:
-		box->x = 0;
-		box->y = output_box.height;
-		break;
-	case CG_MESSAGE_BOTTOM_CENTER:
-		box->x = output_box.width / 2;
-		box->y = output_box.height;
-		break;
-	case CG_MESSAGE_BOTTOM_RIGHT:
-		box->x = output_box.width;
-		box->y = output_box.height;
-		break;
-	case CG_MESSAGE_CENTER:
-		box->x = output_box.width / 2;
-		box->y = output_box.height / 2;
-		break;
-	default:
-		break;
-	}
 
-	message_set_output(output, buffer, box,
-	                   output->server->message_config.anchor);
+	message_set_output(output, buffer, box, CG_MESSAGE_TOP_RIGHT);
 	free(buffer);
 	alarm(output->server->message_config.display_time);
 }
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic pop
+#endif
 
 void
 message_printf_pos(struct cg_output *output, struct wlr_box *position,
-                   const enum cg_message_anchor anchor, const char *fmt, ...) {
+                   const enum cg_message_align align, const char *fmt, ...) {
 	if(output->destroyed) {
 		free(position);
 		return;
@@ -324,7 +291,7 @@ message_printf_pos(struct cg_output *output, struct wlr_box *position,
 	vsnprintf(buffer, buf_len, fmt, ap);
 	va_end(ap);
 
-	message_set_output(output, buffer, position, anchor);
+	message_set_output(output, buffer, position, align);
 	free(buffer);
 	alarm(output->server->message_config.display_time);
 }

message.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef MESSAGE_H
@@ -11,15 +11,12 @@ struct cg_output;
 struct wlr_box;
 struct wlr_buffer;
 
-enum cg_message_anchor {
+enum cg_message_align {
 	CG_MESSAGE_TOP_LEFT,
-	CG_MESSAGE_TOP_CENTER,
 	CG_MESSAGE_TOP_RIGHT,
 	CG_MESSAGE_BOTTOM_LEFT,
-	CG_MESSAGE_BOTTOM_CENTER,
 	CG_MESSAGE_BOTTOM_RIGHT,
 	CG_MESSAGE_CENTER,
-	CG_MESSAGE_NOPT
 };
 
 struct cg_message_config {
@@ -27,7 +24,6 @@ struct cg_message_config {
 	int display_time;
 	float bg_color[4];
 	float fg_color[4];
-	enum cg_message_anchor anchor;
 };
 
 struct cg_message {
@@ -41,7 +37,7 @@ void
 message_printf(struct cg_output *output, const char *fmt, ...);
 void
 message_printf_pos(struct cg_output *output, struct wlr_box *position,
-                   enum cg_message_anchor, const char *fmt, ...);
+                   enum cg_message_align, const char *fmt, ...);
 void
 message_clear(struct cg_output *output);
 

output.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200809L
@@ -16,14 +16,12 @@
 #endif
 #include <wlr/backend/headless.h>
 #include <wlr/types/wlr_compositor.h>
-#include <wlr/types/wlr_cursor.h>
 #include <wlr/types/wlr_data_device.h>
-#include <wlr/types/wlr_gamma_control_v1.h>
 #include <wlr/types/wlr_output.h>
+#include <wlr/types/wlr_output_damage.h>
 #include <wlr/types/wlr_output_layout.h>
 #include <wlr/types/wlr_scene.h>
 #include <wlr/types/wlr_xcursor_manager.h>
-#include <wlr/util/box.h>
 #include <wlr/util/log.h>
 #include <wlr/util/region.h>
 #if CG_HAS_XWAYLAND
@@ -45,7 +43,7 @@
 void
 output_clear(struct cg_output *output) {
 	struct cg_server *server = output->server;
-	wlr_scene_output_destroy(output->scene_output);
+	wlr_output_layout_remove(server->output_layout, output->wlr_output);
 
 	if(server->running && server->curr_output == output &&
 	   wl_list_length(&server->outputs) > 1) {
@@ -116,14 +114,9 @@ output_get_num(const struct cg_output *output) {
 
 struct wlr_box
 output_get_layout_box(struct cg_output *output) {
-	struct wlr_box box;
-	wlr_output_layout_get_box(output->server->output_layout, output->wlr_output,
-	                          &box);
-	if(!output->destroyed && !wlr_box_empty(&box)) {
-		output->layout_box.x = box.x;
-		output->layout_box.y = box.y;
-		output->layout_box.width = box.width;
-		output->layout_box.height = box.height;
+	if(!output->destroyed) {
+		wlr_output_layout_get_box(output->server->output_layout,
+		                          output->wlr_output, &output->layout_box);
 	}
 	return output->layout_box;
 }
@@ -136,24 +129,19 @@ output_destroy(struct cg_output *output) {
 
 	if(output->destroyed == false) {
 		wl_list_remove(&output->destroy.link);
+		wl_list_remove(&output->mode.link);
 		wl_list_remove(&output->commit.link);
 		wl_list_remove(&output->frame.link);
-		wlr_scene_output_destroy(output->scene_output);
-		output->scene_output = NULL;
 	}
 	output->destroyed = true;
 	enum output_role role = output->role;
 	if(role == OUTPUT_ROLE_PERMANENT) {
-		output->wlr_output = wlr_headless_add_output(server->headless_backend,
-		                                             output->layout_box.width,
-		                                             output->layout_box.height);
-		output->scene_output =
-		    wlr_scene_output_create(server->scene, output->wlr_output);
-		struct wlr_output_layout_output *lo =
-		    wlr_output_layout_add(server->output_layout, output->wlr_output,
-		                          output->layout_box.x, output->layout_box.y);
-		wlr_scene_output_layout_add_output(server->scene_output_layout, lo,
-		                                   output->scene_output);
+		wlr_output_layout_get_box(server->output_layout, output->wlr_output,
+		                          &output->layout_box);
+		wlr_output_layout_remove(server->output_layout, output->wlr_output);
+		output->wlr_output=wlr_headless_add_output(server->headless_backend,output->layout_box.width,output->layout_box.height);
+		wlr_output_layout_add(server->output_layout, output->wlr_output, output->layout_box.x,
+		                      output->layout_box.y);
 
 	} else {
 
@@ -188,27 +176,6 @@ handle_output_destroy(struct wl_listener *listener, void *data) {
 	output_destroy(output);
 }
 
-void
-handle_output_gamma_control_set_gamma(struct wl_listener *listener,
-                                      void *data) {
-	struct cg_server *server =
-	    wl_container_of(listener, server, gamma_control_set_gamma);
-	const struct wlr_gamma_control_manager_v1_set_gamma_event *event = data;
-
-	struct wlr_gamma_control_v1 *gamma_control =
-	    wlr_gamma_control_manager_v1_get_control(server->gamma_control,
-	                                             event->output);
-
-	struct wlr_output_state pending = {0};
-	wlr_gamma_control_v1_apply(gamma_control, &pending);
-	if(!wlr_output_test_state(event->output, &pending)) {
-		wlr_gamma_control_v1_send_failed_and_destroy(gamma_control);
-	} else {
-		wlr_output_commit_state(event->output, &pending);
-		wlr_output_schedule_frame(event->output);
-	}
-}
-
 static void
 handle_output_frame(struct wl_listener *listener, void *data) {
 	struct cg_output *output = wl_container_of(listener, output, frame);
@@ -220,7 +187,7 @@ handle_output_frame(struct wl_listener *listener, void *data) {
 	if(scene_output == NULL) {
 		return;
 	}
-	wlr_scene_output_commit(scene_output, NULL);
+	wlr_scene_output_commit(scene_output);
 
 	struct timespec now = {0};
 	clock_gettime(CLOCK_MONOTONIC, &now);
@@ -312,24 +279,20 @@ output_apply_config(struct cg_server *server, struct cg_output *output,
                     struct cg_output_config *config) {
 	struct wlr_output *wlr_output = output->wlr_output;
 
-	struct wlr_box prev_box;
-	prev_box.x = output->layout_box.x;
-	prev_box.y = output->layout_box.y;
-	prev_box.width = output->layout_box.width;
-	prev_box.height = output->layout_box.height;
-	bool prio_changed = false;
 	if(config->role != OUTPUT_ROLE_DEFAULT) {
 		output->role = config->role;
-		if((output->role == OUTPUT_ROLE_PERIPHERAL) &&
-		   (output->destroyed == true)) {
+		if((output->role == OUTPUT_ROLE_PERIPHERAL)&&(output->destroyed == true)) {
 			output_destroy(output);
 			wlr_output_destroy(wlr_output);
 			return;
 		}
 	}
 
+	if(output->wlr_output->enabled) {
+		wlr_output_layout_remove(server->output_layout, wlr_output);
+	}
+
 	if(config->priority != -1) {
-		prio_changed = (output->priority != config->priority);
 		output->priority = config->priority;
 	}
 
@@ -350,59 +313,22 @@ output_apply_config(struct cg_server *server, struct cg_output *output,
 			wlr_output_commit(wlr_output);
 			return;
 		}
-		if(wlr_box_empty(&output->layout_box)) {
-			struct wlr_output_layout_output *lo =
-			    wlr_output_layout_add(server->output_layout, wlr_output,
-			                          config->pos.x, config->pos.y);
-			wlr_scene_output_layout_add_output(server->scene_output_layout, lo,
-			                                   output->scene_output);
-		} else {
-			wlr_scene_output_set_position(output->scene_output, config->pos.x,
-			                              config->pos.y);
+		wlr_output_layout_add(server->output_layout, wlr_output, config->pos.x,
+		                      config->pos.y);
+		/* Since the size of the output may have changed, we
+		 * reinitialize all workspaces with a fullscreen layout */
+		for(unsigned int i = 0; i < output->server->nws; ++i) {
+			output_make_workspace_fullscreen(output, i);
 		}
-		if(output->workspaces != NULL) {
-			wlr_output_layout_get_box(server->output_layout, output->wlr_output,
-			                          &output->layout_box);
-			/* Since the size of the output may have changed, we
-			 * reinitialize all workspaces with a fullscreen layout */
-			if(output->layout_box.width != prev_box.width ||
-			   output->layout_box.height != prev_box.height) {
-				for(unsigned int i = 0; i < output->server->nws; ++i) {
-					output_make_workspace_fullscreen(output, i);
-				}
-			}
-			if(prev_box.x != output->layout_box.x ||
-			   prev_box.y != output->layout_box.y) {
-				for(unsigned int i = 0; i < server->nws; ++i) {
-					struct cg_workspace *ws = output->workspaces[i];
-					bool first = true;
-					for(struct cg_tile *tile = ws->focused_tile;
-					    first || output->workspaces[i]->focused_tile != tile;
-					    tile = tile->next) {
-						first = false;
-						if(tile->view != NULL) {
-							wlr_scene_node_set_position(
-							    &tile->view->scene_tree->node,
-							    tile->view->ox + output->layout_box.x,
-							    tile->view->oy + output->layout_box.y);
-						}
-					}
-				}
-			}
-		}
-	} else if(wlr_box_empty(&output->layout_box)) {
+	} else {
 		wlr_output_layout_add_auto(server->output_layout, wlr_output);
-		// The following two lines make sure that the output is "manually"
-		// managed, so that its position doesn't change anymore in the
-		// future.
+		// The following two lines make sure that the output is "manually" managed,
+		// so that its position doesn't change anymore in the future.
 		wlr_output_layout_get_box(server->output_layout, output->wlr_output,
-		                          &output->layout_box);
-		wlr_output_layout_remove(server->output_layout, output->wlr_output);
-		struct wlr_output_layout_output *lo =
-		    wlr_output_layout_add(server->output_layout, output->wlr_output,
-		                          output->layout_box.x, output->layout_box.y);
-		wlr_scene_output_layout_add_output(server->scene_output_layout, lo,
-		                                   output->scene_output);
+								  &output->layout_box);
+		wlr_output_layout_move(server->output_layout, output->wlr_output, output->layout_box.x,
+		                      output->layout_box.y);
+
 
 		struct wlr_output_mode *preferred_mode =
 		    wlr_output_preferred_mode(wlr_output);
@@ -418,10 +344,8 @@ output_apply_config(struct cg_server *server, struct cg_output *output,
 		wlr_output_enable(wlr_output, false);
 		wlr_output_commit(wlr_output);
 	} else {
-		if(prio_changed) {
-			wl_list_remove(&output->link);
-			output_insert(server, output);
-		}
+		wl_list_remove(&output->link);
+		output_insert(server, output);
 		wlr_output_enable(wlr_output, true);
 		wlr_output_commit(wlr_output);
 	}
@@ -438,8 +362,11 @@ output_apply_config(struct cg_server *server, struct cg_output *output,
 	output->bg = wlr_scene_rect_create(
 	    &scene_output->scene->tree, output->wlr_output->width,
 	    output->wlr_output->height, server->bg_color);
-	wlr_scene_node_set_position(&output->bg->node, scene_output->x,
-	                            scene_output->y);
+	wlr_output_layout_get_box(server->output_layout, output->wlr_output,
+	                          &output->layout_box);
+	wlr_scene_node_set_position(&output->bg->node,
+	                            output_get_layout_box(output).x,
+	                            output_get_layout_box(output).y);
 	wlr_scene_node_lower_to_bottom(&output->bg->node);
 }
 
@@ -557,9 +484,8 @@ handle_output_commit(struct wl_listener *listener, void *data) {
 		return;
 	}
 
-	if(event->state->committed &
-	   (WLR_OUTPUT_STATE_TRANSFORM | WLR_OUTPUT_STATE_SCALE |
-	    WLR_OUTPUT_STATE_MODE)) {
+	if(event->committed &
+	   (WLR_OUTPUT_STATE_TRANSFORM | WLR_OUTPUT_STATE_SCALE)) {
 		struct cg_view *view;
 		wl_list_for_each(
 		    view, &output->workspaces[output->curr_workspace]->views, link) {
@@ -570,12 +496,29 @@ handle_output_commit(struct wl_listener *listener, void *data) {
 	}
 }
 
+static void
+handle_output_mode(struct wl_listener *listener, void *data) {
+	struct cg_output *output = wl_container_of(listener, output, mode);
+
+	if(!output->wlr_output->enabled || output->workspaces == NULL) {
+		return;
+	}
+
+	struct cg_view *view;
+	wl_list_for_each(view, &output->workspaces[output->curr_workspace]->views,
+	                 link) {
+		if(view_is_visible(view)) {
+			view_maximize(view, view->tile);
+		}
+	}
+}
+
 void
 output_make_workspace_fullscreen(struct cg_output *output, int ws) {
 	struct cg_server *server = output->server;
-	struct cg_view *current_view = output->workspaces[ws]->focused_tile->view;
+	struct cg_view *current_view = seat_get_focus(server->seat);
 
-	if(current_view == NULL) {
+	if(current_view == NULL || ws != output->curr_workspace) {
 		struct cg_view *it = NULL;
 		wl_list_for_each(it, &output->workspaces[ws]->views, link) {
 			if(view_is_visible(it)) {
@@ -598,18 +541,19 @@ output_make_workspace_fullscreen(struct cg_output *output, int ws) {
 		it_view->tile = output->workspaces[ws]->focused_tile;
 	}
 
-	workspace_tile_update_view(output->workspaces[ws]->focused_tile,
-	                           current_view);
-	if((ws == output->curr_workspace) && (output == server->curr_output)) {
+	if(ws == output->curr_workspace) {
 		seat_set_focus(server->seat, current_view);
 	}
 }
 
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wanalyzer-malloc-leak"
+#endif
 void
 handle_new_output(struct wl_listener *listener, void *data) {
 	struct cg_server *server = wl_container_of(listener, server, new_output);
 	struct wlr_output *wlr_output = data;
-	wlr_output_enable(wlr_output, true);
 
 	if(!wlr_output_init_render(wlr_output, server->allocator,
 	                           server->renderer)) {
@@ -628,7 +572,7 @@ handle_new_output(struct wl_listener *listener, void *data) {
 	}
 	if(reinit) {
 		wlr_output_layout_remove(server->output_layout, output->wlr_output);
-		wlr_scene_output_destroy(output->scene_output);
+		wlr_output_destroy(output->wlr_output);
 	} else {
 		output = calloc(1, sizeof(struct cg_output));
 	}
@@ -636,13 +580,13 @@ handle_new_output(struct wl_listener *listener, void *data) {
 		wlr_log(WLR_ERROR, "Failed to allocate output");
 		return;
 	}
-	output->scene_output = wlr_scene_output_create(server->scene, wlr_output);
 
 	output->wlr_output = wlr_output;
 	output->destroyed = false;
 
 	if(!reinit) {
 		output->server = server;
+		output->last_scanned_out_view = NULL;
 		output->name = strdup(wlr_output->name);
 
 		struct cg_output_priorities *it;
@@ -666,8 +610,6 @@ handle_new_output(struct wl_listener *listener, void *data) {
 		}
 
 		output_insert(server, output);
-		// This is duplicated here only as a cue for the static analysis tool
-		output->destroyed = false;
 		output_configure(server, output);
 		wlr_output_layout_get_box(server->output_layout, output->wlr_output,
 		                          &output->layout_box);
@@ -693,28 +635,16 @@ handle_new_output(struct wl_listener *listener, void *data) {
 			server->curr_output = output;
 		}
 	} else {
-		struct wlr_output_layout_output *lo =
-		    wlr_output_layout_add(server->output_layout, wlr_output,
-		                          output->layout_box.x, output->layout_box.y);
-		wlr_scene_output_layout_add_output(server->scene_output_layout, lo,
-		                                   output->scene_output);
-
-		struct wlr_output_mode *preferred_mode =
-		    wlr_output_preferred_mode(wlr_output);
-		if(preferred_mode) {
-			wlr_output_set_mode(wlr_output, preferred_mode);
-		}
-		wlr_output_set_transform(wlr_output, WL_OUTPUT_TRANSFORM_NORMAL);
-		wlr_scene_output_set_position(
-		    output->scene_output, output->layout_box.x, output->layout_box.y);
-		wlr_output_enable(wlr_output, true);
-		wlr_output_commit(wlr_output);
+		wlr_output_layout_add(server->output_layout, wlr_output,
+		                      output_get_layout_box(output).x,
+		                      output_get_layout_box(output).y);
 		output_configure(server, output);
-		output_get_layout_box(output);
+		wlr_output_layout_get_box(server->output_layout, output->wlr_output,
+		                          &output->layout_box);
 	}
 
-	wlr_cursor_set_xcursor(server->seat->cursor, server->seat->xcursor_manager,
-	                       DEFAULT_XCURSOR);
+	wlr_xcursor_manager_set_cursor_image(server->seat->xcursor_manager,
+	                                     DEFAULT_XCURSOR, server->seat->cursor);
 	wlr_cursor_warp(server->seat->cursor, NULL, 0, 0);
 
 	output->destroy.notify = handle_output_destroy;
@@ -723,6 +653,8 @@ handle_new_output(struct wl_listener *listener, void *data) {
 	wl_signal_add(&wlr_output->events.frame, &output->frame);
 	output->commit.notify = handle_output_commit;
 	wl_signal_add(&wlr_output->events.commit, &output->commit);
+	output->mode.notify = handle_output_mode;
+	wl_signal_add(&wlr_output->events.mode, &output->mode);
 
 	ipc_send_event(server,
 	               "{\"event_name\":\"new_output\",\"output\":\"%s\",\"output_"
@@ -730,3 +662,6 @@ handle_new_output(struct wl_listener *listener, void *data) {
 	               output->name, output_get_num(output), output->priority,
 	               reinit);
 }
+#if CG_HAS_FANALYZE
+#pragma GCC diagnostic pop
+#endif

output.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_OUTPUT_H
@@ -22,8 +22,8 @@ struct cg_output {
 	struct cg_server *server;
 	struct wlr_output *wlr_output;
 	struct wlr_scene_rect *bg;
-	struct wlr_scene_output *scene_output;
 
+	struct wl_listener mode;
 	struct wl_listener commit;
 	struct wl_listener destroy;
 	struct wl_listener frame;
@@ -32,6 +32,7 @@ struct cg_output {
 	struct wlr_box layout_box;
 	int curr_workspace;
 	int priority;
+	struct cg_view *last_scanned_out_view;
 	enum output_role role;
 	bool destroyed;
 	char *name;
@@ -75,8 +76,4 @@ void
 output_make_workspace_fullscreen(struct cg_output *output, int ws);
 int
 output_get_num(const struct cg_output *output);
-void
-handle_output_gamma_control_set_gamma(struct wl_listener *listener, void *data);
-void
-output_insert(struct cg_server *server, struct cg_output *output);
 #endif

pango.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #include <cairo.h>

pango.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef _SWAY_PANGO_H

parse.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200812L
@@ -720,7 +720,6 @@ parse_message_config(char **saveptr, char **errstr) {
 	cfg->fg_color[0] = -1;
 	cfg->display_time = -1;
 	cfg->font = NULL;
-	cfg->anchor = CG_MESSAGE_NOPT;
 
 	char *setting = strtok_r(NULL, " ", saveptr);
 	if(setting == NULL) {
@@ -764,22 +763,6 @@ parse_message_config(char **saveptr, char **errstr) {
 				goto error;
 			}
 		}
-	} else if(strcmp(setting, "anchor") == 0) {
-		char *anchors[] = {"top_left",    "top_center",    "top_right",
-		                   "bottom_left", "bottom_center", "bottom_right",
-		                   "center"};
-		for(int i = 0; i < 7; ++i) {
-			if(strcmp(*saveptr, anchors[i]) == 0) {
-				cfg->anchor = i;
-				break;
-			}
-		}
-		if(cfg->anchor == CG_MESSAGE_NOPT) {
-			*errstr =
-			    log_error("Error parsing command \"configure_message anchor\", "
-			              "the given anchor value is not a valid option");
-			goto error;
-		}
 	} else {
 		*errstr = log_error("Invalid option to command \"configure_message\"");
 		goto error;

parse.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef PARSE_H

release-non-auto-checks/Bugs.md

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/FAQ.md

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/SECURITY.md

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/WLR_XDG_VERSION

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/acknowledge-contributors

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/archwiki

@@ -1,2 +0,0 @@
-2.3.1
-2024-01-27

release-non-auto-checks/changelog-major-minor

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/internal-wiki

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/release-note

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/reproducibility-checked

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/security-to-man-page-info-transfer

@@ -1,2 +1,2 @@
-2.3.1
-2024-01-27
+2.2.1
+2023-08-21

release-non-auto-checks/version-restrictions

@@ -1,2 +0,0 @@
-2.3.1
-2024-01-27

scripts/adjust-epoch

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 if [[ -n ${MESON_SOURCE_ROOT} ]]

scripts/create-release-artefacts

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 if [[ -n ${MESON_SOURCE_ROOT} ]]

scripts/create-signatures

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 if [[ -n ${MESON_SOURCE_ROOT} ]]

scripts/fuzz

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 readonly fuzzing_corpus="${1}"

scripts/git-tag

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 readonly gpg_id="${1}"

scripts/install-development-environment

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 sudo pacman -Syu --noconfirm git grep sed xorg-xev meson ninja clang gcc shellcheck jq openbsd-netcat gnupg binutils alacritty wlroots wayland wayland-protocols libxkbcommon cairo pango fontconfig libinput libevdev pkgconf scdoc systemd-libs # systemd-libs is included because of libudev

scripts/output-hashes

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 if [[ -n ${MESON_SOURCE_ROOT} ]]

scripts/set-version

@@ -1,7 +1,9 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
+# TODO man pages
+
 if [[ -n ${MESON_SOURCE_ROOT} ]]
 then
 	# shellcheck disable=2164

seat.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200812L
@@ -14,7 +14,7 @@
 #include <wlr/types/wlr_compositor.h>
 #include <wlr/types/wlr_cursor.h>
 #include <wlr/types/wlr_data_device.h>
-#include <wlr/types/wlr_idle_notify_v1.h>
+#include <wlr/types/wlr_idle.h>
 #include <wlr/types/wlr_keyboard_group.h>
 #include <wlr/types/wlr_primary_selection.h>
 #include <wlr/types/wlr_scene.h>
@@ -59,10 +59,10 @@ update_capabilities(const struct cg_seat *seat) {
 	/* Hide cursor if the seat doesn't have pointer capability. */
 	if(((caps & WL_SEAT_CAPABILITY_POINTER) == 0) ||
 	   seat->enable_cursor == false) {
-		wlr_cursor_unset_image(seat->cursor);
+		wlr_cursor_set_image(seat->cursor, NULL, 0, 0, 0, 0, 0, 0);
 	} else {
-		wlr_cursor_set_xcursor(seat->cursor, seat->xcursor_manager,
-		                       DEFAULT_XCURSOR);
+		wlr_xcursor_manager_set_cursor_image(seat->xcursor_manager,
+		                                     DEFAULT_XCURSOR, seat->cursor);
 	}
 }
 
@@ -168,7 +168,7 @@ handle_modifier_event(struct wlr_input_device *device, struct cg_seat *seat) {
 	wlr_seat_set_keyboard(seat->seat, keyboard);
 	wlr_seat_keyboard_notify_modifiers(seat->seat, &keyboard->modifiers);
 
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 void
@@ -204,11 +204,12 @@ handle_command_key_bindings(struct cg_server *server, xkb_keysym_t sym,
 		    &server->scene->tree.node, server->seat->cursor->x,
 		    server->seat->cursor->y, &sx, &sy);
 		if(server->seat->enable_cursor) {
-			wlr_cursor_set_xcursor(server->seat->cursor,
-			                       server->seat->xcursor_manager, "left_ptr");
+			wlr_xcursor_manager_set_cursor_image(server->seat->xcursor_manager,
+			                                     "left_ptr",
+			                                     server->seat->cursor);
 			if(node && node->type == WLR_SCENE_NODE_BUFFER) {
 				struct wlr_scene_surface *scene_surface =
-				    wlr_scene_surface_try_from_buffer(
+				    wlr_scene_surface_from_buffer(
 				        wlr_scene_buffer_from_node(node));
 				if(scene_surface != NULL) {
 					surface = scene_surface->surface;
@@ -237,7 +238,7 @@ handle_command_key_bindings(struct cg_server *server, xkb_keysym_t sym,
 		}
 		message_clear(group->seat->server->curr_output);
 		run_action((*keybinding)->action, server, (*keybinding)->data);
-		wlr_idle_notifier_v1_notify_activity(server->idle, server->seat->seat);
+		wlr_idle_notify_activity(server->idle, server->seat->seat);
 		return true;
 	} else if(mode != 0) {
 		run_action(KEYBINDING_NOOP, server, (union keybinding_params){NULL});
@@ -310,7 +311,7 @@ handle_key_event(struct cg_keyboard_group *group, struct cg_seat *seat,
 		                             event->keycode, event->state);
 	}
 
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -587,7 +588,7 @@ handle_touch_down(struct wl_listener *listener, void *data) {
 	uint32_t serial = 0;
 	if(node && node->type == WLR_SCENE_NODE_BUFFER) {
 		struct wlr_scene_surface *scene_surface =
-		    wlr_scene_surface_try_from_buffer(wlr_scene_buffer_from_node(node));
+		    wlr_scene_surface_from_buffer(wlr_scene_buffer_from_node(node));
 		if(scene_surface != NULL) {
 			serial = wlr_seat_touch_notify_down(
 			    seat->seat, scene_surface->surface, event->time_msec,
@@ -601,7 +602,7 @@ handle_touch_down(struct wl_listener *listener, void *data) {
 		seat->touch_ly = ly;
 	}
 
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -614,7 +615,7 @@ handle_touch_up(struct wl_listener *listener, void *data) {
 	}
 
 	wlr_seat_touch_notify_up(seat->seat, event->time_msec, event->touch_id);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -636,7 +637,7 @@ handle_touch_motion(struct wl_listener *listener, void *data) {
 
 	if(node && node->type == WLR_SCENE_NODE_BUFFER) {
 		struct wlr_scene_surface *scene_surface =
-		    wlr_scene_surface_try_from_buffer(wlr_scene_buffer_from_node(node));
+		    wlr_scene_surface_from_buffer(wlr_scene_buffer_from_node(node));
 		if(scene_surface != NULL) {
 
 			wlr_seat_touch_point_focus(seat->seat, scene_surface->surface,
@@ -655,7 +656,7 @@ handle_touch_motion(struct wl_listener *listener, void *data) {
 		seat->touch_ly = ly;
 	}
 
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -663,7 +664,7 @@ handle_cursor_frame(struct wl_listener *listener, void *_data) {
 	struct cg_seat *seat = wl_container_of(listener, seat, cursor_frame);
 
 	wlr_seat_pointer_notify_frame(seat->seat);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -674,7 +675,7 @@ handle_cursor_axis(struct wl_listener *listener, void *data) {
 	wlr_seat_pointer_notify_axis(seat->seat, event->time_msec,
 	                             event->orientation, event->delta,
 	                             event->delta_discrete, event->source);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -684,7 +685,7 @@ handle_cursor_button(struct wl_listener *listener, void *data) {
 
 	wlr_seat_pointer_notify_button(seat->seat, event->time_msec, event->button,
 	                               event->state);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -699,7 +700,7 @@ process_cursor_motion(struct cg_seat *seat, uint32_t time) {
 
 	if(node && node->type == WLR_SCENE_NODE_BUFFER) {
 		struct wlr_scene_surface *scene_surface =
-		    wlr_scene_surface_try_from_buffer(wlr_scene_buffer_from_node(node));
+		    wlr_scene_surface_from_buffer(wlr_scene_buffer_from_node(node));
 		if(scene_surface != NULL) {
 			surface = scene_surface->surface;
 			if(surface != NULL) {
@@ -720,7 +721,7 @@ process_cursor_motion(struct cg_seat *seat, uint32_t time) {
 		drag_icon_update_position(drag_icon);
 	}
 
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 
 	/* Check if cursor switched tile */
 	struct wlr_output *c_outp = wlr_output_layout_output_at(
@@ -731,39 +732,34 @@ process_cursor_motion(struct cg_seat *seat, uint32_t time) {
 			break;
 		}
 	}
-	if(c_outp) {
-		struct cg_tile *c_tile;
-		bool first = true;
-		for(c_tile = cg_outp->workspaces[cg_outp->curr_workspace]->focused_tile;
-		    first ||
-		    c_tile !=
-		        cg_outp->workspaces[cg_outp->curr_workspace]->focused_tile;
-		    c_tile = c_tile->next) {
-			first = false;
-			double ox = seat->cursor->x, oy = seat->cursor->y;
-			wlr_output_layout_output_coords(seat->server->output_layout, c_outp,
-			                                &ox, &oy);
-			if(c_tile->tile.x <= ox && c_tile->tile.y <= oy &&
-			   c_tile->tile.x + c_tile->tile.width >= ox &&
-			   c_tile->tile.y + c_tile->tile.height >= oy) {
-				break;
-			}
+	struct cg_tile *c_tile;
+	bool first = true;
+	for(c_tile = cg_outp->workspaces[cg_outp->curr_workspace]->focused_tile;
+	    first ||
+	    c_tile != cg_outp->workspaces[cg_outp->curr_workspace]->focused_tile;
+	    c_tile = c_tile->next) {
+		first = false;
+		double ox = seat->cursor->x, oy = seat->cursor->y;
+		wlr_output_layout_output_coords(seat->server->output_layout, c_outp,
+		                                &ox, &oy);
+		if(c_tile->tile.x <= ox && c_tile->tile.y <= oy &&
+		   c_tile->tile.x + c_tile->tile.width >= ox &&
+		   c_tile->tile.y + c_tile->tile.height >= oy) {
+			break;
 		}
-		if(seat->cursor_tile != NULL && seat->cursor_tile != c_tile &&
-		   seat->server->running) {
-			ipc_send_event(
-			    seat->server,
-			    "{\"event_name\":\"cursor_switch_tile\",\"old_output\":"
-			    "\"%s\",\"old_output_id\":%d,"
-			    "\"old_tile\":%d,\"new_output\":\"%s\",\"new_output_"
-			    "id\":%d,\"new_tile\":%d}",
-			    seat->cursor_tile->workspace->output->name,
-			    output_get_num(seat->cursor_tile->workspace->output),
-			    seat->cursor_tile->id, c_outp->name, output_get_num(cg_outp),
-			    c_tile->id);
-		}
-		seat->cursor_tile = c_tile;
 	}
+	if(seat->cursor_tile != NULL && seat->cursor_tile != c_tile) {
+		ipc_send_event(seat->server,
+		               "{\"event_name\":\"cursor_switch_tile\",\"old_output\":"
+		               "\"%s\",\"old_output_id\":%d,"
+		               "\"old_tile\":%d,\"new_output\":\"%s\",\"new_output_"
+		               "id\":%d,\"new_tile\":%d}",
+		               seat->cursor_tile->workspace->output->name,
+		               output_get_num(seat->cursor_tile->workspace->output),
+		               seat->cursor_tile->id, c_outp->name,
+		               output_get_num(cg_outp), c_tile->id);
+	}
+	seat->cursor_tile = c_tile;
 }
 
 static void
@@ -775,7 +771,7 @@ handle_cursor_motion_absolute(struct wl_listener *listener, void *data) {
 	wlr_cursor_warp_absolute(seat->cursor, &event->pointer->base, event->x,
 	                         event->y);
 	process_cursor_motion(seat, event->time_msec);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -786,7 +782,7 @@ handle_cursor_motion(struct wl_listener *listener, void *data) {
 	wlr_cursor_move(seat->cursor, &event->pointer->base, event->delta_x,
 	                event->delta_y);
 	process_cursor_motion(seat, event->time_msec);
-	wlr_idle_notifier_v1_notify_activity(seat->server->idle, seat->seat);
+	wlr_idle_notify_activity(seat->server->idle, seat->seat);
 }
 
 static void
@@ -918,7 +914,6 @@ handle_destroy(struct wl_listener *listener, void *_data) {
 	wl_list_remove(&seat->request_set_cursor.link);
 	wl_list_remove(&seat->request_set_selection.link);
 	wl_list_remove(&seat->request_set_primary_selection.link);
-	seat->server->seat = NULL;
 	free(seat);
 }
 

seat.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_SEAT_H

server.c

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #define _POSIX_C_SOURCE 200809L

server.h

@@ -1,4 +1,4 @@
-// Copyright 2020 - 2024, project-repo and the cagebreak contributors
+// Copyright 2020 - 2023, project-repo and the cagebreak contributors
 // SPDX-License-Identifier: MIT
 
 #ifndef CG_SERVER_H
@@ -26,22 +26,18 @@ struct cg_server {
 	struct cg_seat *seat;
 	struct cg_input_manager *input;
 	struct wlr_backend *backend;
-	struct wlr_idle_notifier_v1 *idle;
+	struct wlr_idle *idle;
 	struct wlr_idle_inhibit_manager_v1 *idle_inhibit_v1;
 	struct wl_listener new_idle_inhibitor_v1;
-	struct wlr_gamma_control_manager_v1 *gamma_control;
-	struct wl_listener gamma_control_set_gamma;
 	struct wl_list inhibitors;
 
 	struct wlr_output_layout *output_layout;
-	struct wlr_scene_output_layout *scene_output_layout;
 	struct wl_list disabled_outputs;
 	struct wl_list outputs;
 	struct cg_output *curr_output;
 	struct wl_listener new_output;
 	struct wl_list output_priorities;
 	struct wlr_backend *headless_backend;
-	struct wlr_session *session;
 
 	struct wlr_renderer *renderer;
 	struct wlr_allocator *allocator;

test/arguments

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright 2023 - 2024, project-repo and the cagebreak contributors
+# Copyright 2023, project-repo and the cagebreak contributors
 # SPDX-License-Identifier: MIT
 
 testdir="${MESONCURRENTCONFIGDIR}/_build-arguments/"