# SPDX-License-Identifier: AGPL-3.0-only
# Copyright 2026-present the Unsloth AI Inc. team. All rights reserved.

# Verifies that `unsloth studio update --local` is idempotent: a fresh
# install via install.sh, followed by `unsloth studio update --local`,
# succeeds and is a no-op for the llama.cpp prebuilt (it should report
# "prebuilt up to date and validated", not re-run the source build).
#
# This catches regressions in setup.sh's update path that the existing
# GGUF / wheel jobs would miss because they only invoke install.sh once.

name: Unsloth Update CI

on:
  pull_request:
    paths:
      - 'install.sh'
      - 'scripts/uninstall.sh'
      - 'studio/setup.sh'
      - 'studio/install_python_stack.py'
      - 'studio/install_llama_prebuilt.py'
      - 'studio/backend/requirements/**'
      - 'unsloth_cli/commands/studio.py'
      - 'pyproject.toml'
      - '.github/workflows/studio-update-smoke.yml'
  push:
    branches: [main, pip]
  workflow_dispatch:

concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

permissions:
  contents: read

jobs:
  update-idempotency:
    name: Unsloth Updating Tests
    runs-on: ubuntu-latest
    timeout-minutes: 15
    steps:
      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
        with:
          persist-credentials: false

      - name: Linux deps for llama.cpp prebuilt
        run: |
          sudo apt-get update
          sudo apt-get install -y --no-install-recommends \
            libcurl4-openssl-dev libssl-dev jq

      - uses: actions/setup-node@48b55a011bda9f5d6aeb4c2d9c7362e8dae4041e  # v6.4.0
        with:
          node-version: '22'

      - uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405  # v6.2.0
        with:
          python-version: '3.12'
          # Don't cache pip: this job runs `bash install.sh` and
          # `unsloth studio update --local` which both go through
          # `uv` and never populate ~/.cache/pip. setup-python's
          # post-step then fatal-errors with "Cache folder path is
          # retrieved for pip but doesn't exist on disk".

      - name: Install Unsloth (--local, --no-torch)
        # Pass the workflow token so the llama.cpp prebuilt installer's
        # GitHub-API call to list releases isn't rate-limited (60/hr
        # unauthenticated). Without this, three consecutive install +
        # update + update calls in this job exceed the limit and the
        # prebuilt path falls back to source build.
        env:
          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          # Withheld on PR: this step runs checked-out PR code; public GGUF still downloads.
          HF_TOKEN: ${{ github.event_name != 'pull_request' && secrets.HF_TOKEN || '' }}
        run: |
          mkdir -p logs
          set -o pipefail
          bash install.sh --local --no-torch 2>&1 | tee logs/install.log

      - name: First update should be a no-op (prebuilt already validated)
        # `unsloth studio update --local` runs studio/setup.sh against
        # the local repo. Right after install.sh the llama.cpp prebuilt
        # has just been installed and validated, so the second run must
        # take the "prebuilt up to date and validated" code path. Any
        # source-build fallback or re-download here means setup.sh's
        # idempotency regressed.
        env:
          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          # Withheld on PR: this step runs checked-out PR code; public GGUF still downloads.
          HF_TOKEN: ${{ github.event_name != 'pull_request' && secrets.HF_TOKEN || '' }}
        run: |
          set -o pipefail
          unsloth studio update --local 2>&1 | tee logs/update.log
          if grep -q "falling back to source build" logs/update.log; then
            echo "::error::studio update fell back to source-build llama.cpp on a fresh install. setup.sh idempotency regressed."
            grep -E "llama-prebuilt|llama.cpp" logs/update.log | tail -60
            exit 1
          fi
          if ! grep -qE "prebuilt up to date and validated|prebuilt installed and validated" logs/update.log; then
            echo "::error::no prebuilt up-to-date marker in update.log. Did setup.sh skip the prebuilt path on update?"
            grep -E "llama-prebuilt|llama.cpp" logs/update.log | tail -60
            exit 1
          fi
          echo "update path took the prebuilt fast path"

      - name: Second update must also be a no-op
        # Two consecutive `update`s back-to-back is the usual desktop
        # flow (auto-update, then user-triggered update). Asserting the
        # second run is also clean rules out hidden state changes from
        # the first one.
        env:
          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          # Withheld on PR: this step runs checked-out PR code; public GGUF still downloads.
          HF_TOKEN: ${{ github.event_name != 'pull_request' && secrets.HF_TOKEN || '' }}
        run: |
          set -o pipefail
          unsloth studio update --local 2>&1 | tee logs/update2.log
          grep -q "falling back to source build" logs/update2.log && {
              echo "::error::second update fell back to source build"
              tail -60 logs/update2.log; exit 1; } || true
          grep -qE "prebuilt up to date and validated|prebuilt installed and validated" logs/update2.log
          echo "second update was clean"

      - name: Boot Unsloth briefly to confirm the install is still usable
        # If `update --local` accidentally broke the venv or wiped the
        # llama-server binary, the server would fail to start here.
        run: |
          mkdir -p logs
          UNSLOTH_API_ONLY=1 unsloth studio -H 127.0.0.1 -p 18891 \
            > logs/studio.log 2>&1 &
          PID=$!
          for i in $(seq 1 60); do
            if curl -fs http://127.0.0.1:18891/api/health > /tmp/health.json; then
              jq -e '.status == "healthy"' /tmp/health.json
              break
            fi
            sleep 1
          done
          if ! jq -e '.status == "healthy"' /tmp/health.json 2>/dev/null; then
            echo "Unsloth failed to come up after `update`"
            tail -200 logs/studio.log
            kill "$PID" 2>/dev/null || true
            exit 1
          fi
          kill "$PID" 2>/dev/null || true
          echo "post-update Unsloth /api/health OK"

      - name: A complete install reports itself complete
        run: |
          set -o pipefail
          unsloth studio verify-install
          unsloth studio desktop-capabilities --json | tee /tmp/caps.json
          jq -e '.studio_install_ok == true' /tmp/caps.json
          jq -e '.desktop_manageability_version >= 2' /tmp/caps.json

      - name: An incomplete install must not report itself ready
        # An installer killed part-way leaves a working CLI but no studio.txt
        # deps, which the old preflight called ManagedReady. The manifest is
        # written last, so removing it reproduces that state.
        run: |
          set -o pipefail
          # install.sh's default root, resolved explicitly: `python` on PATH
          # here is setup-python's, not the managed venv.
          MANIFEST="$HOME/.unsloth/studio/unsloth_studio/unsloth_install_manifest.json"
          test -f "$MANIFEST" || { echo "::error::installer never wrote $MANIFEST"; exit 1; }
          rm -f "$MANIFEST"
          unsloth studio desktop-capabilities --json | tee /tmp/caps_bad.json
          jq -e '.studio_install_ok == false' /tmp/caps_bad.json
          if unsloth studio verify-install; then
            echo "::error::verify-install passed on an install with no manifest"
            exit 1
          fi
          echo "incomplete install correctly reported not-ready"

      - name: Update repairs an incomplete install
        # `--local` bypasses setup.sh's PyPI version compare, so this asserts
        # the repair OUTCOME. The non-local fast path the desktop Repair button
        # uses is covered by tests/studio/install/test_setup_fast_path_guard.py.
        env:
          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          set -o pipefail
          unsloth studio update --local 2>&1 | tee logs/update_repair.log
          unsloth studio verify-install
          unsloth studio desktop-capabilities --json | jq -e '.studio_install_ok == true'
          echo "update repaired the incomplete install"

      - name: Uninstall and verify clean
        # Round-trip the installer through scripts/uninstall.sh: confirms the
        # uninstaller actually finds and removes everything install.sh +
        # update wrote. Safety-guard scenarios (refuse-$HOME etc.) belong
        # in a separate fast smoke job; this is the happy-path cleanup
        # assertion that catches regressions where install.sh starts
        # writing to a new location and scripts/uninstall.sh hasn't caught up.
        # Skips gracefully if scripts/uninstall.sh has not landed yet (lets
        # this workflow merge before #5497).
        run: |
          set -o pipefail
          if [ ! -f scripts/uninstall.sh ]; then
            echo "scripts/uninstall.sh not present in this tree; skipping round-trip"
            : > logs/uninstall.log
            exit 0
          fi
          sh scripts/uninstall.sh 2>&1 | tee logs/uninstall.log
          leak=0
          for p in \
            "$HOME/.unsloth/studio" \
            "$HOME/.local/share/unsloth" \
            "$HOME/Desktop/Unsloth Studio.desktop" \
            "$HOME/.local/bin/unsloth"; do
            if [ -e "$p" ] || [ -L "$p" ]; then
              echo "::error::leak: $p"
              ls -la "$p" 2>&1 | head -3
              leak=$((leak + 1))
            fi
          done
          [ "$leak" -eq 0 ] || exit 1
          # Idempotent: re-runs exit 0 on an empty $HOME.
          sh scripts/uninstall.sh 2>&1 | tail -5
          sh scripts/uninstall.sh 2>&1 | tail -5
          echo "PASS: install -> update -> uninstall round-trip clean"

      - name: Upload update logs
        # Always upload so a green run still leaves the install + two
        # update logs + uninstall log reviewable.
        if: always()
        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a  # v7.0.1
        with:
          name: studio-update-log
          path: |
            logs/install.log
            logs/update.log
            logs/update2.log
            logs/studio.log
            logs/uninstall.log
          retention-days: 7