* Revert to balanced for inference
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Remove unused for_inference parameter from get_device_map
Since inference and training both use "balanced" now, the for_inference
flag is dead code. Remove it from the function signature, the call site
in inference.py, and simplify the tests accordingly.
* Remove redundant TestDeviceMapForInference test class
TestGpuAutoSelection already covers the same multi-gpu and single-gpu
device_map assertions. The TestDeviceMapForInference class was left
over from when for_inference had distinct behavior.
* Remove redundant test_get_device_map_multi_gpu_uses_balanced
Its assertions ([0,1] -> balanced, [0] -> sequential) are already
covered by test_get_device_map_uses_explicit_gpu_selection.
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* fix(studio): replace unicode emoji in print() to avoid cp1252 crash on Windows
On Windows the default console encoding is cp1252 which cannot encode
unicode emoji like U+2705 or U+26A0. bare print() calls with these
characters cause a UnicodeEncodeError at runtime.
- run.py: replace emoji with ASCII status prefixes [OK] and [WARNING]
- format_conversion.py: remove duplicate print() that mirrors the
logger.info() call on the next line, and drop the emoji from the
log message since loggers handle encoding separately
* fix(studio): apply same emoji/print cleanup to parallel VLM conversion path
The parallel URL-based conversion logic has the same duplicate print()
with emoji that was fixed in the sequential path. Remove the bare
print() and drop the emoji from the logger.info() call.
* Treat install_python_stack.py failure as fatal in setup.ps1
On Linux/Mac, setup.sh runs under set -euo pipefail so a non-zero
exit from install_python_stack.py aborts the installer. On Windows,
setup.ps1 had no exit code check -- if the Python script crashed
(eg from the cp1252 UnicodeEncodeError), the installer silently
continued past the dependency loop and reported success. Studio
would then fail at launch with ModuleNotFoundError for structlog,
fastapi, and other deps that were never installed.
Capture $LASTEXITCODE and exit 1 if the dependency installer fails,
matching the error handling pattern already used for PyTorch install.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* [WIP] balanced device map for studio
* gpus as a request parameter
* API for multi GPU stuff
* return multi gpu util in new API
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Use balanced_low0 instead of balanced
* Use balanced_low0 instead of balanced
* Fix device_map typo, UUID parsing crash, set() filter bug, and broken tests
- balanced_low0 -> balanced_low_0 (transformers/accelerate rejects the old string)
- get_parent_visible_gpu_ids() now handles UUID/MIG CUDA_VISIBLE_DEVICES
gracefully instead of crashing on int() parse
- _get_backend_visible_gpu_info() set() or None bug: empty set is falsy so
CUDA_VISIBLE_DEVICES=-1 would disable filtering and report all GPUs
- test_gpu_selection.py: add missing get_visible_gpu_utilization import and
add required job_id arg to start_training() calls
* Smart GPU determinism using estimates
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* disallow gpu selection for gguf for now
* cleanup
* Slightly larger baseline
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Treat empty list as auto
* Verbose logging/debug
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Cleanup and revert unnecessary deletions
* Cleanup excessive logs and guard against disk/cpu offload
* auth for visibility API. cleanup redundant imports. Adjust QLoRA estimate
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* support for non cuda gpus
* Fix multi-GPU auto-selection memory accounting
The multi_gpu_factor was applied uniformly to all GPUs including the
first one, which unfairly penalizes single-GPU capacity when
transitioning to multi-GPU. This created a discontinuity where a model
that barely fits 1 GPU would suddenly require 2 GPUs because the first
GPU's free memory was discounted by 20%.
Now the first GPU keeps its full free memory, and only additional GPUs
have an overhead factor (0.85) applied to account for inter-GPU
communication and sharding overhead. This gives more accurate
auto-selection and avoids unnecessary multi-GPU for models that
comfortably fit on one device.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Add sandbox tests for multi-GPU selection logic
24 tests covering model size estimation, memory requirements, automatic
GPU selection, device map generation, GPU ID validation, and multi-GPU
overhead accounting. All tests use mocks so they run without GPUs on
Linux, macOS, and Windows.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix reviewer findings: 4bit inference estimate, fallback, GGUF gpu_ids, retry
1. 4-bit inference now uses reduced memory estimate (model_size/3 + buffer)
instead of the FP16 1.3x multiplier. This prevents over-sharding
quantized models across unnecessary GPUs.
2. When model size estimation fails, auto_select_gpu_ids now falls back to
all visible GPUs instead of returning None (which could default to
single-GPU loading for an unknown-size model).
3. GGUF inference route now treats gpu_ids=[] as auto-selection (same as
None) instead of rejecting it as an unsupported explicit request.
4. Training retry path for "could not get source code" now preserves the
gpu_ids parameter so the retry lands on the same GPUs.
5. Updated sandbox tests to cover the new 4-bit inference estimate branch.
* Remove accidentally added unsloth-zoo submodule
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix UUID/MIG visibility and update test expectations
1. nvidia.py: When CUDA_VISIBLE_DEVICES uses UUID/MIG tokens, the
visibility APIs now return "unresolved" with empty device lists instead
of exposing all physical GPUs. This prevents the UI from showing GPUs
that the backend process cannot actually use.
2. test_gpu_selection.py: Updated test expectations to match the new
multi-GPU overhead accounting (first GPU at full capacity, 0.85x for
additional GPUs) and 4-bit inference memory estimation formula.
All 60 tests now pass.
* Add CPU/disk offload guard to audio inference path
The audio model loading branch returned before the common
get_offloaded_device_map_entries() check, so audio models loaded with a
multi-GPU device_map that spilled layers to CPU/disk would be accepted
instead of rejected. Now audio loads also verify no modules are offloaded.
* Improve VRAM requirement estimates
* Replace balanced_low_0 with balanced
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* refine calculations for slightly easier nums
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* adjust estimates
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Use nums instead of obj to avoid seralisation error
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Harden nvidia-smi parsing and fix fallback GPU list
1. nvidia.py: Wrap int() casts for GPU index and memory in try/except
so MIG slices, N/A values, or unexpected nvidia-smi output skip the
unparseable row instead of aborting the entire GPU list.
2. nvidia.py: Handle GPU names containing commas by using the last
field as memory instead of a fixed positional index.
3. hardware.py: fallback_all now uses gpu_candidates (GPUs with verified
VRAM data) instead of raw devices list, which could include GPUs
with null VRAM that were excluded from the ranking.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* cleanup
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* consolidate raise_if_offload
* Improve MoE support. Guard against nvidia-smi failures
* Improve MoE support. Guard against nvidia-smi failures
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix shared-expert LoRA undercount, torch VRAM fallback, and apply_gpu_ids edge case
1. vram_estimation.py: compute_lora_params now includes shared experts
(n_shared_experts) alongside routed experts when computing MoE LoRA
adapter parameters. Previously only n_experts were counted, causing
the estimator to undercount adapter, optimizer, and gradient memory
for DeepSeek/GLM-style models with shared experts.
2. hardware.py: _torch_get_per_device_info now uses mem_get_info (which
reports system-wide VRAM usage) instead of memory_allocated (which
only reports this process's PyTorch allocations). This prevents
auto-selection from treating a GPU as mostly free when another
process is consuming VRAM. Falls back to memory_allocated when
mem_get_info is unavailable.
3. hardware.py: apply_gpu_ids([]) now returns early instead of setting
CUDA_VISIBLE_DEVICES="" which would disable CUDA entirely. Empty
list inherits the parent visibility, same as None.
4. hardware.py: Upgraded fallback_all GPU selection log from debug to
warning so operators are notified when the model likely will not fit
in available VRAM.
* Guard nvidia-smi subprocess calls against OSError and TimeoutExpired
get_visible_gpu_utilization and get_backend_visible_gpu_info now catch
OSError (nvidia-smi not found) and TimeoutExpired internally instead
of relying on callers to wrap every invocation. Returns the standard
available=False sentinel on failure so the torch-based fallback in
hardware.py can take over.
* Guard get_primary_gpu_utilization and reset GPU caches between tests
1. nvidia.py: get_primary_gpu_utilization now catches OSError and
TimeoutExpired internally, matching the pattern already used in
get_visible_gpu_utilization and get_backend_visible_gpu_info. All
three nvidia-smi callers are now self-contained.
2. test_gpu_selection.py: Added _GpuCacheResetMixin that resets the
module-level _physical_gpu_count and _visible_gpu_count caches in
tearDown. Applied to all test classes that exercise GPU selection,
device map, or visibility functions. This prevents stale cache
values from leaking between tests and causing flaky results on
machines with real GPUs.
* Fix nvidia-smi fallback regression and physical GPU count validation
1. hardware.py: get_gpu_utilization, get_visible_gpu_utilization, and
get_backend_visible_gpu_info now check result.get("available") before
returning the nvidia-smi result. When nvidia-smi is unavailable or
returns no data (e.g., containers without nvidia-smi, UUID/MIG masks),
the functions fall through to the torch-based fallback instead of
returning an empty result. This fixes a regression where the internal
exception handling in nvidia.py prevented the caller's except block
from triggering the fallback.
2. hardware.py: resolve_requested_gpu_ids now separates negative-ID
validation from physical upper-bound validation. The physical count
check is only enforced when it is plausibly a true physical count
(i.e., higher than the largest parent-visible ID), since
torch.cuda.device_count() under CUDA_VISIBLE_DEVICES returns the
visible count, not the physical total. The parent-visible-set check
remains authoritative in all cases. This prevents valid physical IDs
like [2, 3] from being rejected as "out of range" when nvidia-smi is
unavailable and CUDA_VISIBLE_DEVICES="2,3" makes torch report only
2 devices.
* Fix UUID/MIG torch fallback to enumerate devices by ordinal
When CUDA_VISIBLE_DEVICES uses UUID or MIG identifiers,
get_parent_visible_gpu_ids() returns [] because the tokens are
non-numeric. The torch fallback in get_visible_gpu_utilization() and
get_backend_visible_gpu_info() previously passed that empty list to
_torch_get_per_device_info(), getting nothing back.
Now both functions detect the empty-list case and fall back to
enumerating torch-visible ordinals (0..device_count-1) with
index_kind="relative". This means the UI and auto-selection still
see real device data in Kubernetes, MIG, and Slurm-style UUID
environments where nvidia-smi output cannot be mapped to physical
indices.
Updated test_uuid_parent_visibility to verify the new torch fallback
path returns available=True with relative ordinals.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Add type hint for gpu_ids parameter in InferenceOrchestrator.load_model
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
normalize_path() unconditionally converted Windows paths like
C:\Users\... to WSL format /mnt/c/Users/..., which breaks path
resolution on native Windows. This caused LM Studio GGUF models
to fail detection (detect_gguf_model returned None for the invalid
path), falling through to the Unsloth import path which requires
a GPU.
Now only performs the /mnt/ mapping when actually running under WSL.
On native Windows, drive letters are preserved and backslashes are
normalized to forward slashes.
* fix: default HF cache to standard platform path instead of legacy Unsloth cache
* feat: show LM Studio and local models in chat Fine-tuned tab
* feat: show LM Studio models in Hub models tab
* fix: fetch local models after auth refresh completes
* Revert "fix: fetch local models after auth refresh completes"
This reverts commit cfd61f0ac7.
* fix: increase llama-server health check timeout to 600s for large models
* feat: expandable GGUF variant picker for LM Studio local models
* fix: show GGUF variant label for locally loaded LM Studio models
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: show publisher name in LM Studio model labels
* fix: set model_id for loose GGUF files in LM Studio publisher dirs
* fix: show publisher prefix in Fine-tuned tab LM Studio models
* fix: only use model_id for lmstudio source models
* fix: only show LM Studio models in Hub tab on Mac/chat-only mode
* fix: respect XDG_CACHE_HOME, handle Windows paths in isLocalPath, refresh LM Studio on remount
- _setup_cache_env now reads XDG_CACHE_HOME (falls back to ~/.cache)
instead of hard-coding ~/.cache/huggingface. This follows the standard
HF cache resolution chain and respects distro/container overrides.
- isLocalPath in GgufVariantExpander uses a regex that covers Windows
drive letters (C:\, D:/), UNC paths (\\server\share), relative paths
(./, ../), and tilde (~/) -- not just startsWith("/").
- HubModelPicker.useEffect now calls listLocalModels() before the
alreadyCached early-return gate so LM Studio models are always
refreshed on remount. Also seeds useState from _lmStudioCache for
instant display on re-open.
* fix: add comment explaining isLocalPath regex for Windows/cross-platform paths
* fix: prioritize unsloth publisher in LM Studio model list
* fix: scope unsloth-first sort to LM Studio models on all platforms
* fix: add missing _lmStudioCache module-level declaration
* fix: prioritize unsloth publisher before timestamp sort in LM Studio group
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* fix: install.sh Mac Intel compatibility + Studio no-torch support (#4621)
On Intel Macs (x86_64), PyTorch has no wheels for torch >= 2.3, so the
installer crashes. Even when torch is absent, Studio crashes on startup
because two files have bare top-level torch imports.
Studio's GGUF inference (llama.cpp) does not need PyTorch. Training and
HF-inference already isolate torch to subprocesses. Only 2 files in the
server startup chain had top-level torch imports preventing startup.
Changes:
- install.sh: detect architecture, default to Python 3.12 on Intel Mac,
skip torch install, add Python 3.13.8 guard for arm64, pass
UNSLOTH_NO_TORCH env var to setup.sh
- data_collators.py: remove unused `import torch` (no torch.* refs)
- chat_templates.py: lazy-import IterableDataset into function bodies
- install_python_stack.py: add IS_MACOS/NO_TORCH constants, skip
torch-dependent packages, skip overrides.txt, skip triton on macOS
No existing working flow changes. Linux/WSL and macOS arm64 behavior is
identical.
* tests: add test suite for Mac Intel compat + no-torch mode
Shell tests (test_mac_intel_compat.sh):
- version_ge edge cases (9 tests)
- Architecture detection for Darwin x86_64/arm64, Linux x86_64/aarch64
- get_torch_index_url returns cpu on simulated Darwin
- UNSLOTH_NO_TORCH propagation to both setup.sh branches
Python unit tests (test_no_torch_filtering.py):
- _filter_requirements with NO_TORCH_SKIP_PACKAGES
- NO_TORCH env var parsing (true/1/TRUE/false/0/unset)
- IS_MACOS constant check
- Overrides skip and triton macOS skip guards
Python import tests (test_studio_import_no_torch.py):
- data_collators.py loads in isolated no-torch venv
- chat_templates.py has no top-level torch imports
- Negative control confirms import torch fails without torch
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* tests: add E2E sandbox tests for Mac Intel no-torch mode
Replace static/synthetic test stubs with real sandbox tests:
- Shell: E2E uv venv creation at Python 3.12, mock uv shim to verify
torch install is skipped when MAC_INTEL=true, dynamic env propagation
test for UNSLOTH_NO_TORCH in both local and non-local install paths
- Python filtering: test real extras.txt and extras-no-deps.txt with
NO_TORCH_SKIP_PACKAGES, subprocess mock of install_python_stack() for
5 platform configs (NO_TORCH+macOS, Windows+NO_TORCH, normal Linux,
Windows-only, macOS-only), VCS URL and env marker edge cases
- Python imports: parametrized Python 3.12+3.13 venv fixture, dataclass
instantiation for all 3 collator classes, chat_templates.py exec with
stubs, negative controls proving import torch and torchao install fail
in no-torch venvs
91 total tests, all passing.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: address reviewer findings for Intel Mac no-torch mode
P1 fixes:
- Auto-infer NO_TORCH in install_python_stack.py via platform.machine()
so `unsloth studio update` preserves GGUF-only mode without needing
the UNSLOTH_NO_TORCH env var (6/10 reviewers)
- Add openai-whisper and transformers-cfg to NO_TORCH_SKIP_PACKAGES
since both have unconditional torch dependencies (4/10 reviewers)
- Skip unsloth-zoo on Intel Mac --local installs (depends on torch)
in both migrated and fresh install paths (1/10)
- Recreate stale 3.13 venvs as 3.12 on Intel Mac re-runs (1/10)
- Detect Apple Silicon under Rosetta via sysctl hw.optional.arm64
and warn user to use native arm64 terminal (1/10)
P2 fixes:
- Wire new test files into tests/run_all.sh (4/10 reviewers)
- Add update-path tests (skip_base=False) for Intel Mac
- Add _infer_no_torch tests for platform auto-detection
P3 fixes:
- Fix macOS progress bar total (triton step skipped but was counted)
- Fix temp file leak when Windows + NO_TORCH filters stack
All tests pass: 30 shell, 66 Python (96 total).
* feat: add --python override flag to install.sh
Lets users force a specific Python version, e.g. ./install.sh --python 3.12.
Addresses M2 Mac users whose systems resolve to a problematic 3.13.x patch.
When --python is set, the Intel Mac stale-venv guard and 3.13.8 auto-downgrade
are skipped so the user's choice is respected.
* tests: add comprehensive E2E sandbox tests for no-torch mode
Add test_e2e_no_torch_sandbox.py with 7 test groups (43 tests total)
covering the full no-torch import chain, edge cases, and install logic:
- Group 1: BEFORE vs AFTER import chain comparison (proves the bug
existed and the fix works by synthetically prepending top-level torch
imports)
- Group 2: Dataclass instantiation without torch
- Group 3: Edge cases with broken/fake torch modules on sys.path
- Group 4: Hardware detection fallback to CPU without torch
- Group 5: install.sh flag parsing, version resolution, arch detection
- Group 6: install_python_stack.py NO_TORCH filtering
- Group 7: Live server startup without torch (marked @server, skipped
when studio venv is unavailable)
All 43 tests pass on both Python 3.12 and 3.13 isolated venvs.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* feat: add --no-torch flag to install.sh/ps1, fix lazy import bug in dataset formatting
- Fix chat_templates.py: narrow torch IterableDataset import into inner
try/except ImportError so dataset.map() works without torch installed
- Fix format_conversion.py: same lazy import fix for convert_chatml_to_alpaca
and convert_alpaca_to_chatml
- Add --no-torch flag to install.sh with unified SKIP_TORCH variable
(driven by --no-torch flag OR MAC_INTEL auto-detection)
- Add --no-torch flag to install.ps1 with $SkipTorch variable
- Print CPU hint when no GPU detected and --no-torch not set
- Replace MAC_INTEL guards with SKIP_TORCH in torch install sections
- Update shell tests (40 pass) and Python tests (90 pass)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: address reviewer findings for --no-torch installer paths
- Fix migrated-env branch in install.sh and install.ps1: check
SKIP_TORCH first, then branch on STUDIO_LOCAL_INSTALL. Previously
SKIP_TORCH+non-local fell into else and installed unsloth-zoo (which
depends on torch), defeating --no-torch mode.
- Fix $env:UNSLOTH_NO_TORCH leak in install.ps1: always set to "true"
or "false" instead of only setting on the true branch. Prevents stale
no-torch state from leaking across runs in the same PS session.
- Fix install_python_stack.py update path: add NO_TORCH guard around
base.txt install so unsloth studio update does not reinstall
unsloth-zoo (which depends on torch) in no-torch mode.
* fix: install unsloth + unsloth-zoo with --no-deps in no-torch mode
Instead of skipping unsloth-zoo entirely (which breaks unsloth's
dependency on it), install both packages with --no-deps so they are
present but torch is not pulled in transitively. Applied consistently
across all no-torch paths: migrated-env, fresh-local, fresh-non-local
in install.sh, install.ps1, and install_python_stack.py.
* chore: temporarily remove test files (will be added in a follow-up)
* refactor: deduplicate SKIP_TORCH conditional branches in installers
Collapse if/else blocks that differ only by --no-deps into a single
branch with a conditional flag variable. Applied to migrated-env and
fresh-local paths in install.sh, install.ps1, and install_python_stack.py.
* fix: apply --no-deps to fresh non-local --no-torch install path
The non-local else branch was missing $_no_deps_arg/$noDepsArg, so
uv pip install unsloth would resolve torch from PyPI metadata (the
published unsloth package still declares torch as a hard dep). Now
--no-deps is applied consistently to all SKIP_TORCH code paths.
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* feat: multi-source model discovery (HF default, legacy cache, LM Studio)
* Fix multi-source model discovery bugs
- Fix lmstudio_model_dirs: add ~/.lmstudio/models as default path,
remove dead sys.platform branch, add dedup via seen set
- Fix _setup_cache_env: preserve legacy HF cache env vars when the
legacy hub directory exists and is non-empty
- Fix _scan_lmstudio_dir: use absolute path for id field so
is_local_path() returns True
- Remove LM Studio dirs from allowed_roots (scanned unconditionally)
- Replace bare except passes with logger.warning in legacy cache blocks
- Fix delete_cached_model to search both default and legacy HF caches
- Make lmstudio_dirs non-optional in TS interface (matches Python schema)
- Exclude lmstudio source from trainable model filter
- Remove unused import sys
* Scan HF default cache alongside legacy and active caches
When _setup_cache_env overrides HF_HUB_CACHE to the legacy Unsloth
path, the standard HF default cache (~/.cache/huggingface/hub) was
never scanned, hiding models downloaded before Unsloth Studio was
installed.
Add hf_default_cache_dir() and _all_hf_cache_scans() helper that
deduplicates and scans all three HF cache locations (active, legacy,
default). Used in list_local_models, list_cached_gguf,
list_cached_models, and delete_cached_model.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* feat(db): add SQLite storage layer for training history
* feat(api): add training history endpoints and response models
* feat(training): integrate DB persistence into training event loop
* feat(ui): add training history views and card grid
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix(studio): address review issues in training history persistence
- Strip hf_token/wandb_token from config before SQLite storage
- Add UUID suffix to job_id for collision resistance
- Use isfinite() for 0.0 metric handling throughout
- Respect _should_stop in error event finalization
- Run schema DDL once per process, not per connection
- Close connection on schema init failure
- Guard cleanup_orphaned_runs at startup
- Cap _metric_buffer at 500 entries
- Make FLUSH_THRESHOLD a class constant
- Map 'running' to 'training' phase in historical view
- Derive LR/GradNorm from history arrays in historical view
- Fix nested button with div[role=button] in history cards
- Guard String(value) against null/undefined in config popover
- Clear selectedHistoryRunId on auto tab switch
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix(studio): address round-2 review findings across training backend and frontend
Backend (training.py):
- Move state mutation after proc.start() so a failed spawn does not wedge
the backend with is_training=True
- Create DB run row eagerly after proc.start() so runs appear in history
during model loading, not after first metric event
- Rewrite _flush_metrics_to_db() with snapshot-before-insert pattern to
preserve metrics arriving during the write and retain buffer on failure
- Guard eval_loss with float() coercion and math.isfinite(), matching the
existing grad_norm guard
- Increase pump thread join timeout from 3s to 8s to cover SQLite's
default 5s lock timeout
Frontend (studio-page.tsx):
- Fix history navigation: check isTrainingRunning instead of
showTrainingView in onSelectRun so completed runs are not misrouted
- Replace activeTab state + auto-switch useEffect with derived tab to
eliminate react-hooks/set-state-in-effect lint violation
Frontend (historical-training-view.tsx):
- Add explicit "running" branch to message ternary so running runs no
longer fall through to "Training errored"
- Derive loading from detail/error state and move cleanup to effect
return to eliminate react-hooks/set-state-in-effect lint violation
Frontend (progress-section.tsx):
- Derive stopRequested from isTrainingRunning && stopRequestedLocal to
eliminate react-hooks/set-state-in-effect lint violation and remove
unused useEffect import
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix(studio): resolve 3 remaining bugs from round-2 review
1. Stuck on Current Run tab [12/20]: Only force "current-run" tab when
isTrainingRunning is true, not when stale completed-run data exists.
After training ends, users can freely navigate to Configure.
2. Incomplete metric sanitization [7/20]: Apply float() coercion and
isfinite() guards to loss and learning_rate, matching the existing
pattern used by grad_norm and eval_loss. Prevents TypeError from
string values and NaN leaks into history arrays.
3. Stop button state leak across runs [10/20]: Add key={runtime.jobId}
to ProgressSection so React remounts it when a new run starts,
resetting stopRequestedLocal state.
* fix(studio): deduplicate loss/lr sanitization in training event handler
Reuse _safe_loss/_safe_lr from the progress update block instead of
re-sanitizing the same raw event values for metric history.
* fix(studio): restore loss > 0 guard to prevent eval steps injecting 0.0 into metric histories
Round-2/3 fixes relaxed the history append guard from `loss > 0` to
`loss is not None`, which let eval-only log events (where loss defaults
to 0.0) append fake zeros into loss_history and lr_history. Restore the
`loss > 0` check to match the worker's own has_train_loss gate. The
float() coercion and isfinite() sanitization from round-3 remain intact.
* fix(studio): resolve training history bugs — nullable loss/lr, tab nav, sparkline
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* fix(studio): prevent ModuleNotFoundError in dataset.map() on Windows
On Windows, dataset.map() uses "spawn", which requires workers to
import compiled modules from disk. Previously, clear_unsloth_compiled_cache()
deleted the entire directory, causing workers to crash when looking for
UnslothSFTTrainer.py.
Changes:
1. Added `preserve_patterns` to cache cleanup to keep `Unsloth*Trainer.py`
on Windows while clearing model-specific files.
2. Added the cache directory to PYTHONPATH for spawn workers.
Linux/macOS behavior is unchanged.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix spawn-platform coverage, CWD path mismatch, and race condition for PR #4473
- Extend platform guard from win32-only to include macOS (also uses spawn
since Python 3.8, same ModuleNotFoundError would occur)
- Replace fragile CWD-based PYTHONPATH registration with centralized
register_compiled_cache_on_path() that uses the same __file__-relative
_CACHE_DIRS already used by cache_cleanup -- fixes path mismatch when
studio is launched from a directory other than the repo root
- Move PYTHONPATH registration to the top of _train_worker(), before any
dataset.map() call (previously it ran late in config assembly, after
dataset formatting which also calls dataset.map())
- Update inference.py model-unload to preserve trainer files on spawn
platforms, preventing a race where unloading a model via inference tab
would delete UnslothSFTTrainer.py while training workers are importing it
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix cache-dir precedence reversal in register_compiled_cache_on_path()
Iterating _CACHE_DIRS in forward order while calling insert(0) each time
reverses the declared priority: later entries shadow earlier ones. When
multiple compiled-cache directories exist, spawned workers could import a
stale trainer from the wrong cache.
Fix: iterate in reverse so that the highest-priority entry (first in
_CACHE_DIRS) is inserted last and ends up at position 0 in sys.path and
PYTHONPATH.
* fix: harden worker-count helpers against cpu_count=None and desired<=0
- safe_num_proc: guard os.cpu_count() with `or 1`, clamp multi-GPU
path with max(1, min(4, desired)), clamp return with max(1, desired)
- safe_thread_num_proc: same os.cpu_count() guard and return clamp
- Add regression tests (31 L1 unit + 10 sandbox edge-case tests)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* remove regression tests from PR
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* fix: handle Windows subprocess crash during dataset.map()
Windows uses spawn (not fork) for multiprocessing. Spawned workers
cannot resolve Unsloth's dynamically compiled cache modules from
unsloth_compiled_cache/, causing ModuleNotFoundError and RuntimeError
during dataset.map() tokenization.
Add two platform-guarded patches for sys.platform == "win32":
1. Force HF_DATASETS_MULTITHREADING_MAX_WORKERS=1 and set spawn method
2. Monkey-patch Dataset.map() to force num_proc=None
Fixes#4490
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* address review: extend spawn fix to macOS, add multiprocess fallback
- Change platform checks from sys.platform == "win32" to
sys.platform != "linux" so macOS (also spawn-based) is covered
- Wrap multiprocess import in try/except falling back to stdlib
multiprocessing when the multiprocess package isn't installed
- Rename _win32_safe_map to _spawn_safe_map to reflect broader scope
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: replace global Dataset.map monkey-patch with targeted num_proc routing
The previous approach had issues: Patch 1 set HF_DATASETS_MULTITHREADING_MAX_WORKERS
and forced set_start_method (dead code on platforms already using spawn), and Patch 2
globally monkey-patched Dataset.map() (too broad, missed Dataset.filter()).
Replace with a two-layer fix:
1. Studio layer: Add dataset_map_num_proc() that returns None on spawn platforms
(Windows, macOS). Unlike num_proc=1 which still creates Pool(1) and spawns a
worker, num_proc=None runs Dataset.map()/filter() truly in-process.
Update all dataset.map() callsites to use it. ThreadPoolExecutor callers
(format_conversion.py) keep using safe_num_proc() since threads are unaffected.
2. Root-cause layer: Propagate UNSLOTH_COMPILE_LOCATION via PYTHONPATH on spawn
platforms so spawned workers can import compiled modules. Mirrors the .venv_t5
pattern in worker.py. Does not import unsloth_zoo.compiler (heavy torch/triton
imports). Completely skipped on Linux.
Also extend safe_num_proc() to return 1 on macOS (was only guarding Windows),
and narrow the transformers 5.x dataloader guard from != "linux" to explicit
("win32", "darwin").
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: add safe_thread_num_proc() for ThreadPoolExecutor callsites
safe_num_proc() correctly caps to 1 on macOS/Windows for process-based
multiprocessing, but format_conversion.py reuses it for ThreadPoolExecutor
workers. Threads share address space and are unaffected by spawn, so
capping to 1 makes image URL downloads sequential -- a real regression.
Add safe_thread_num_proc() that skips the platform guard but keeps the
cpu_count heuristic, and switch both ThreadPoolExecutor callsites in
format_conversion.py to use it.
* fix: remove double-wrap in dataset_num_proc + fix num_proc=1 in datasets route
- trainer.py:3009: Replace safe_num_proc(max(1, os.cpu_count() // 4))
with max(1, (os.cpu_count() or 1) // 4) to avoid double-wrapping
inside dataset_map_num_proc which already calls safe_num_proc
- trainer.py:15-20: Clarify comment on PYTHONPATH propagation
- datasets.py:445: Change num_proc=1 to num_proc=None for 10-row
preview slice (avoids unnecessary multiprocessing overhead)
* fix: guard os.cpu_count() against None in worker-count helpers
os.cpu_count() can return None on some platforms. Use (os.cpu_count() or 1)
to prevent TypeError in safe_num_proc() and safe_thread_num_proc().
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* feat(chat): add server-side timings and context display for GGUF
Extract timings/usage metadata from llama-server SSE stream and forward
through the full stack. Replace client-side estimates with accurate
server-reported metrics (prompt eval, tok/s, token counts, cache hits).
Add context window usage bar to chat top nav.
* feat(chat): source badges with hover cards and 2-row collapse
- Add hover cards to source badges showing favicon, title, URL and
snippet description on hover
- Limit source badges to 2 rows with +X more expand/collapse
- Parse snippet from web search results for hover card descriptions
- Replace individual Source rendering with grouped SourcesGroup component
* fix(chat): add null guards for server timings edge cases
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix(chat): reset contextUsage on thread switch, remove unused context-display
* fix(chat): stop double-counting completion tokens in tool-calling path
* fix(chat): skip metadata events in llm_assist consumers
* fix(chat): hide context usage bar in compare mode
* fix(chat): harden timings pipeline and context usage persistence
Accumulate prompt_ms, predicted_ms, and predicted_n from intermediate
tool-detection passes so the final metadata reflects total server work.
Persist contextUsage in message metadata (Dexie) and restore on thread
load. Add type guard in gguf_stream_chunks for unexpected dict events.
Clear contextUsage when entering compare mode.
* feat(chat): make GGUF stream metadata OpenAI-compatible
* fix(chat): address PR review feedback
* feat(chat): address PR review feedback
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* fix(recipe-studio): prevent fitView from zooming to wrong location on recipe load
* feat: add pymupdf/python-docx deps and unstructured uploads storage root
* feat: add POST /seed/upload-unstructured-file endpoint
* feat: add multi-file chunking with source_file column
* feat: update frontend types and API layer for multi-file upload
* feat: round-robin preview rows across source files
Ensures every uploaded file is represented in the preview table
by cycling through sources instead of just taking the first N rows.
* fix: disable OCR, fix auto-load timing, fix persistence on reload
- Disable pymupdf4llm OCR with write_images=False, show_progress=False
- Replace onAllUploaded callback with useEffect that detects uploading→done
transition (avoids stale closure reading empty file IDs)
- Fix importer to preserve file IDs from saved recipes instead of clearing
(clearing only happens at share time via sanitizeSeedForShare)
* fix: harden unstructured upload with input validation and state fixes
Validate block_id/file_id with alphanumeric regex to prevent path
traversal, use exact stem match for file deletion, add error handling
for metadata writes and empty files, fix React stale closures and
object mutations in upload loop, and correct validation logic for
unstructured seed resolved_paths.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: address PR review - legacy path import, share sanitizer, sync effect
Promote legacy source.path into resolved_paths for old unstructured
recipes, clear source.paths in share sanitizer to prevent leaking local
filesystem paths, and gate file sync effect to dialog open transition
so users can actually delete all uploaded files.
* fix: CSV column fix (BOM + whitespace + unnamed index re-save) for #4470
* fix: harden unstructured upload flow and polish dialog UX
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* feat: support full model GGUF export, disable incompatible methods in UI
* fix: resolve base model from config.json for venv_t5 export switching
* feat: detect BNB-quantized models and disable all export methods for quantized non-PEFT checkpoints
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: relocate Ollama Modelfile alongside GGUFs during non-PEFT export cleanup
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Fixing Qwen3.5 bug and adding Outetts dependencies
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Apply suggestion from @danielhanchen
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
* Allow Windows setup to complete without NVIDIA GPU
setup.ps1 previously hard-exited if nvidia-smi was not found, blocking
setup entirely on CPU-only or non-NVIDIA machines. The backend already
supports CPU and MLX (Apple Silicon) in chat-only GGUF mode, and the
Linux/Mac setup.sh handles missing GPUs gracefully.
Changes:
- Convert the GPU check from a hard exit to a warning
- Guard CUDA toolkit installation behind $HasNvidiaSmi
- Install CPU-only PyTorch when no GPU is detected
- Build llama.cpp without CUDA flags when no GPU is present
- Update doc comment to reflect CPU support
* Cache frontend build across setup runs
Skip the frontend npm install + build if frontend/dist already exists.
Previously setup.ps1 nuked node_modules and package-lock.json on every
run, and both scripts always rebuilt even when dist/ was already present.
On a git clone editable install, the first setup run still builds the
frontend as before. Subsequent runs skip it, saving several minutes.
To force a rebuild, delete frontend/dist and re-run setup.
* Show pip progress for PyTorch download on Windows
The torch CUDA wheel is ~2.8 GB and the CPU wheel is ~300 MB. With
| Out-Null suppressing all output, the install appeared completely
frozen with no feedback. Remove | Out-Null for the torch install
lines so pip's download progress bar is visible. Add a size hint
so users know the download is expected to take a while.
Also moves the Triton success message inside the GPU branch so it
only prints when Triton was actually installed.
* Guard CUDA env re-sanitization behind GPU check in llama.cpp build
The CUDA_PATH re-sanitization block (lines 1020-1033) references
$CudaToolkitRoot which is only set when $HasNvidiaSmi is true and
the CUDA Toolkit section runs. On CPU-only machines, $CudaToolkitRoot
is null, causing Split-Path to throw:
Split-Path : Cannot bind argument to parameter 'Path' because it is null.
Wrap the entire block in `if ($HasNvidiaSmi -and $CudaToolkitRoot)`.
* Rebuild frontend when source files are newer than dist/
Instead of only checking if dist/ exists, compare source file timestamps
against the dist/ directory. If any file in frontend/src/ is newer than
dist/, trigger a rebuild. This handles the case where a developer pulls
new frontend changes and re-runs setup -- stale assets get rebuilt
automatically.
* Fix cmake not found on Windows after winget install
Two issues fixed:
1. After winget installs cmake, Refresh-Environment may not pick up the
new PATH entry (MSI PATH changes sometimes need a new shell). Added a
fallback that probes cmake's default install locations (Program Files,
LocalAppData) and adds the directory to PATH explicitly if found.
2. If cmake is still unavailable when the llama.cpp build starts (e.g.
winget failed silently or PATH was not updated), the build now skips
gracefully with a [SKIP] warning instead of crashing with
"cmake : The term 'cmake' is not recognized".
* Fix frontend rebuild detection and decouple oxc-validator install
Address review feedback:
- Check entire frontend/ directory for changes, not just src/.
The build also depends on package.json, vite.config.ts,
tailwind.config.ts, public/, and other config files. A change
to any of these now triggers a rebuild.
- Move oxc-validator npm install outside the frontend build gate
in setup.sh so it always runs on setup, matching setup.ps1
which already had it outside the gate.
* Show cmake errors on failure and retry CUDA VS integration with elevation
Two fixes for issue #4405 (Windows setup fails at cmake configure):
1. cmake configure: capture output and display it on failure instead of
piping to Out-Null. When the error mentions "No CUDA toolset found",
print a hint about the CUDA VS integration files.
2. CUDA VS integration copy: when the direct Copy-Item fails (needs
admin access to write to Program Files), retry with Start-Process
-Verb RunAs to prompt for elevation. This is the root cause of the
"No CUDA toolset found" cmake failure -- the .targets files that let
MSBuild compile .cu files are missing from the VS BuildCustomizations
directory.
* Address reviewer feedback: cmake PATH persistence, stale cache, torch error check
1. Persist cmake PATH to user registry so Refresh-Environment cannot
drop it later in the same setup run. Previously the process-only
PATH addition at phase 1 could vanish when Refresh-Environment
rebuilt PATH from registry during phase 2/3 installs.
2. Clean stale CMake cache before configure. If a previous run built
with CUDA and the user reruns without a GPU (or vice versa), the
cached GGML_CUDA value would persist. Now the build dir is removed
before configure.
3. Explicitly set -DGGML_CUDA=OFF for CPU-only builds instead of just
omitting CUDA flags. This prevents cmake from auto-detecting a
partial CUDA installation.
4. Fix CUDA cmake flag indentation -- was misaligned from the original
PR, now consistently indented inside the if/else block.
5. Fail hard if pip install torch returns a non-zero exit code instead
of silently continuing with a broken environment.
* Remove extra CUDA cmake flags to align Windows with Linux build
Drop GGML_CUDA_FA_ALL_QUANTS, GGML_CUDA_F16, GGML_CUDA_GRAPHS,
GGML_CUDA_FORCE_CUBLAS, and GGML_CUDA_PEER_MAX_BATCH_SIZE flags.
The Linux build in setup.sh only sets GGML_CUDA=ON and lets llama.cpp
use its defaults for everything else. Keep Windows consistent.
* Address reviewer round 2: GPU probe fallback, Triton check, stale binary rebuild
1. GPU detection: fallback to default nvidia-smi install locations
(Program Files\NVIDIA Corporation\NVSMI, System32) when nvidia-smi
is not on PATH. Prevents silent CPU-only provisioning on machines
that have a GPU but a broken PATH.
2. Triton: check $LASTEXITCODE after pip install and print [WARN]
on failure instead of unconditional [OK].
3. Stale llama-server: check CMakeCache.txt for GGML_CUDA setting
and rebuild if the existing binary does not match the current GPU
mode (e.g. CUDA binary on a now-CPU-only rerun, or vice versa).
* Fix frontend rebuild detection and npm dependency issues
Addresses reviewer feedback on the frontend caching logic:
1. setup.sh: Fix broken find command that caused exit under pipefail.
The piped `find | xargs find -newer` had paths after the expression
which GNU find rejects. Replaced with a simpler `find -maxdepth 1
-type f -newer dist/` that checks ALL top-level files (catches
index.html, bun.lock, etc. that the extension allowlist missed).
2. setup.sh: Guard oxc-validator npm install behind `command -v npm`
check. When the frontend build is skipped (dist/ is cached), Node
bootstrap is also skipped, so npm may not be available.
3. setup.ps1: Replace Get-ChildItem -Include with explicit path
probing for src/ and public/. PowerShell's -Include without a
trailing wildcard silently returns nothing, so src/public changes
were never detected. Also check ALL top-level files instead of
just .json/.ts/.js/.mjs extensions.
* Fix studio setup: venv isolation, centralized .venv_t5, uv targeting
- All platforms (including Colab) now create ~/.unsloth/studio/.venv
with --without-pip fallback for broken ensurepip environments
- Add --python sys.executable to uv pip install in install_python_stack.py
so uv targets the correct venv instead of system Python
- Centralize .venv_t5 bootstrap in transformers_version.py with proper
validation (checks required packages exist, not just non-empty dir)
- Replace ~150 lines of duplicated install code across 3 worker files
with calls to the shared _ensure_venv_t5_exists() helper
- Use uv-if-present with pip fallback; do not install uv at runtime
- Add site.addsitedir() shim in colab.py so notebook cells can import
studio packages from the venv without system-Python double-install
- Update .venv_t5 packages: huggingface_hub 1.3.0->1.7.1, add hf_xet
- Bump transformers pin 4.57.1->4.57.6 in requirements + constraints
- Add Fast-Install helper to setup.ps1 with uv+pip fallback
- Keep Colab-specific completion banner in setup.sh
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix nvidia-smi PATH persistence and cmake requirement for CPU-only
1. Store nvidia-smi as an absolute path ($NvidiaSmiExe) on first
detection. All later calls (Get-CudaComputeCapability,
Get-PytorchCudaTag, CUDA toolkit detection) use this absolute
path instead of relying on PATH. This survives Refresh-Environment
which rebuilds PATH from the registry and drops process-only
additions.
2. Make cmake fatal for CPU-only installs. CPU-only machines depend
entirely on llama-server for GGUF chat mode, so reporting "Setup
Complete!" without it is misleading. GPU machines can still skip
the llama-server build since they have other inference paths.
* Fix broken frontend freshness detection in setup scripts
- setup.sh: Replace broken `find | xargs find -newer` pipeline with
single `find ... -newer` call. The old pipeline produced "paths must
precede expression" errors (silently suppressed by 2>/dev/null),
causing top-level config changes to never trigger a rebuild.
- setup.sh: Add `command -v npm` guard to oxc-validator block so it
does not fail when Node was not installed (build-skip path).
- setup.ps1: Replace `Get-ChildItem -Include` (unreliable without
-Recurse on PS 5.1) with explicit directory paths for src/ and
public/ scanning.
- Both: Add *.html to tracked file patterns so index.html (Vite
entry point) changes trigger a rebuild.
- Both: Use -print -quit instead of piping to head -1 for efficiency.
* Fix bugs found during review of PRs #4404, #4400, #4399
- setup.sh: Add || true guard to find command that checks frontend/src
and frontend/public dirs, preventing script abort under set -euo
pipefail when either directory is missing
- colab.py: Use sys.path.insert(0, ...) instead of site.addsitedir()
so Studio venv packages take priority over system copies. Add warning
when venv is missing instead of silently failing.
- transformers_version.py: _venv_t5_is_valid() now checks installed
package versions via .dist-info metadata, not just directory presence.
Prevents false positives from stale or wrong-version packages.
- transformers_version.py: _install_to_venv_t5() now passes --upgrade
so pip replaces existing stale packages in the target directory.
- setup.ps1: CPU-only PyTorch install uses --index-url for cpu wheel
and all install commands use Fast-Install (uv with pip fallback).
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix _venv_t5_is_valid dist-info loop exiting after first directory
Remove premature break that caused the loop over .dist-info directories
to exit after the first match even if it had no METADATA file. Now
continues iterating until a valid METADATA is found or all dirs are
exhausted.
* Capture error output on failure instead of discarding with Out-Null
setup.ps1: 6 locations changed from `| Out-Null` to `| Out-String` with
output shown on failure -- PyTorch GPU/CPU install, Triton install,
venv_t5 package loop, cmake llama-server and llama-quantize builds.
transformers_version.py: clean stale .venv_t5 directory before reinstall
when validation detects missing or version-mismatched packages.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix ModuleNotFoundError when CLI imports studio.backend.core
The backend uses bare "from utils.*" imports everywhere, relying on
backend/ being on sys.path. Workers and routes add it at startup, but
the CLI imports studio.backend.core as a package -- backend/ was never
added. Add sys.path setup at the top of core/__init__.py so lazy
imports resolve correctly regardless of entry point.
Fixes: unsloth inference unsloth/Qwen3-8B "who are you" crashing with
"No module named 'utils'"
* Fix frontend freshness check to detect all top-level file changes
The extension allowlist (*.json, *.ts, *.js, *.mjs, *.html) missed
files like bun.lock, so lockfile-only dependency changes could skip
the frontend rebuild. Check all top-level files instead.
* Add tiktoken to .venv_t5 for Qwen-family tokenizers
Qwen models use tiktoken-based tokenizers which fail when routed through
the transformers 5.x overlay without tiktoken installed. Add it to the
setup scripts (with deps for Windows) and runtime fallback list.
Integrates PR #4418.
* Fix tiktoken crash in _venv_t5_is_valid and stray brace in setup.ps1
_venv_t5_is_valid() crashed with ValueError on unpinned packages like
"tiktoken" (no ==version). Handle by splitting safely and skipping
version check for unpinned packages (existence check only).
Also remove stray closing brace in setup.ps1 tiktoken install block.
---------
Co-authored-by: Daniel Han <danielhanchen@users.noreply.github.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* studio: improve onboarding UX, tooltips, and training defaults
- Change splash text to "Train and run LLMs locally"
- Add "Chat Only" card with BubbleChatIcon to skip directly to chat
- Add Skip/Skip to Chat buttons in sidebar and footer
- Back button on step 1 returns to splash screen instead of being disabled
- Change "Watch video guide" to "Get started with our guide" with new URL
- Update intro text to mention all model types + chat
- Make all tooltips clickable (in addition to hover) via React context
- Strip surrounding quotes from pasted HF tokens
- Rename "Eval Split" to "Evaluation Split"
- Add SparklesIcon to "Auto Detect" format option
- Change step 4 heading to "Choose your training parameters"
- Default max_steps to 60
- Learning rate displayed in scientific notation with +/- stepper
- Context length options capped by model's max_position_embeddings (via AutoConfig)
- Fix "QLORA"/"LORA" to "QLoRA"/"LoRA" in summary step
- Backend: add max_position_embeddings to model config endpoint
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* compare for 2 diff models
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* resolving gemini comments
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: disable thinking for Qwen3.5 <9B and always for AI Assist
- Change Qwen3.5 thinking threshold from <=2B to <9B (0.8B, 2B, 4B
all disable thinking by default; 9B+ enables it)
- Always pass enable_thinking=False in AI Assist helper calls
(_run_with_helper and _generate_with_backend) regardless of chat
thinking settings
* studio: address PR review comments
- Extract _get_max_position_embeddings helper to DRY config extraction
- Fix "Skip to Chat" to navigate to /chat on step 1 (was /studio)
* fix: comment out debug print statements
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: skip Shiki highlighting for incomplete SVG code fences
While streaming SVG content, the syntax highlighter (Shiki) re-parses
the entire growing SVG on every token, blocking the main thread and
freezing the code area until the fence closes. Show a plain-text
preview for incomplete SVG fences instead, similar to how Mermaid
diagrams show a placeholder while streaming.
* studio: fix default top_k from 50/40 to 20 for chat inference
Per Qwen3.5 docs (unsloth.ai/docs/models/qwen3.5), top_k should be 20
for both thinking and non-thinking modes. The model-specific config in
inference_defaults.json already had top_k=20 for Qwen3.5, but the
generic fallback defaults were wrong:
- Frontend DEFAULT_INFERENCE_PARAMS.topK: 50 -> 20
- Backend generate_chat_completion top_k: 40 -> 20
- Backend generate_chat_completion_with_tools top_k: 40 -> 20
- Frontend title generation top_k: 40 -> 20
* studio: set universal inference defaults for unknown models
Default params for any model without specific config:
temperature=0.6, top_p=0.95, top_k=20, min_p=0.01,
presence_penalty=0.0, repetition_penalty=1.0
Models with entries in inference_defaults.json (Qwen3.5, Gemma-3,
Llama, etc.) override these with their recommended values.
Updated in: frontend DEFAULT_INFERENCE_PARAMS, backend Pydantic
request models, and backend generate_chat_completion defaults.
* studio: only trust_remote_code for unsloth/ models in AutoConfig
Only set trust_remote_code=True when the model name starts with
"unsloth/". All other models default to False for safety.
* studio: move Generating spinner above the composer
The "Generating" spinner was below the send message bar, causing
the bar to jump up and down. Move it above the composer in both
the regular thread view and the welcome/empty view.
* studio: adjust toast close button position away from edge
Move the X close button on toasts (like "Starting model...") from
top-1.5 to top-3 and add right-3, giving more breathing room from
the top-right corner.
* studio: make Think button smaller with tighter icon-text gap
Reduce gap from 1.5 to 0.5, padding from px-2.5/py-1 to px-2/py-0.5,
and icon from size-3.5 to size-3.
* studio: multiple onboarding and chat UX improvements
- Move Generating spinner above composer (fixes jumping send bar)
- Make Think button smaller with tighter icon-text gap
- Chat card now inside grid (same size as Audio/Embeddings cards)
- Rename "Chat Only" to "Chat"
- Chat card requires Continue to proceed (no auto-advance)
- Continue on Chat selection skips onboarding and goes to /chat
- Tooltip (i) click on Chat card doesn't trigger navigation
- Step 1 footer Back button goes back to splash (label is "Back")
- Splash "Skip Onboarding" renamed to "Skip to Chat", navigates to /chat
- Toast close button moved away from edge
* studio: align Skip to Chat button, add Skip to footer
- Sidebar "Skip to Chat" now uses primary (green) Button style with
arrow icon, full width, aligned like step items. Shows on all steps.
- Footer: added "Skip" outline button next to Continue that goes
directly to /studio with progress saved (markOnboardingDone)
* studio: change default max steps from 30 to 60 in toggle hook
The DEFAULT_MAX_STEPS in use-max-steps-epochs-toggle.ts was still 30,
used as fallback when toggling from epochs back to max steps.
* studio: extend context length options to 262K
CONTEXT_LENGTHS now includes 65536, 131072, 262144 in addition to
the existing 512-32768 range. The onboarding step filters these by
the model's max_position_embeddings (e.g. Nemotron-3-Nano-4B has
262144), showing powers of 2 up to the model's maximum.
* studio: auto-select LoRA vs QLoRA based on model size and GPU memory
After selecting a model in onboarding, detect the total model weight
file size from HF Hub (safetensors/bin files). Then estimate memory
needed: model_size_gb * 1.5 * context_scale, where context_scale is:
- <=8192 tokens: 1.0x
- >8192 tokens: 1.7x
- >=16384 tokens: 2.0x
- >=32768 tokens: 4.0x
If the estimate fits in free GPU VRAM, default to LoRA (16-bit).
Otherwise default to QLoRA (4-bit).
Backend changes:
- Add model_size_bytes to ModelDetails (models.py)
- Add _get_model_size_bytes() using HfApi.repo_info (routes/models.py)
- Add vram_free_gb to get_gpu_summary (hardware.py)
Frontend changes:
- Add autoSelectTrainingMethod() in training-config-store.ts
- Called after model defaults are loaded
- Add model_size_bytes to ModelConfigResponse type
- Add vramFreeGb to HardwareInfo hook
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: rename "Importing ML libraries..." to "Importing Unsloth..."
* studio: show model/dataset in training status, fix LoRA/QLoRA casing
- Training status now shows 'Training "model_name"' and 'Dataset = ...'
instead of generic "Starting training..."
- Fix Studio progress section to show QLoRA/LoRA instead of QLORA/LORA
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: rename 'Skip to Chat' to 'Skip Onboarding' on splash screen
* studio: add presence_penalty support for chat inference
Add presence_penalty as a parameter across the full stack:
- Backend: llama_cpp.py generate_chat_completion/with_tools, Pydantic
models (inference.py), routes/inference.py pass-through
- Frontend: InferenceParams type, DEFAULT_INFERENCE_PARAMS (0.0),
chat-adapter.ts payload, chat-settings-sheet.tsx slider (0-2),
model defaults loading from inference_defaults.json
- Set Qwen3.5 default presence_penalty to 1.5 per official docs
- Default for unknown models is 0.0 (off)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: fix Chat card deselecting Text and aligning with other cards
* studio: fix presence_penalty not loading from inference defaults
The inference_config.py load_inference_config() was not including
presence_penalty in the returned config dict, so the Qwen3.5
default of 1.5 from inference_defaults.json never reached the
frontend. Added it to the config builder.
* studio: add delete button for cached models in model selector
Add trash icon on each downloaded model row (GGUF and safetensors) with
confirmation dialog. Backend DELETE /api/models/delete-cached endpoint
uses huggingface_hub scan_cache_dir + delete_revisions to cleanly remove
cached repos, refusing if the model is currently loaded.
* studio: restore inference defaults, reasoning, and tools on page refresh
On page refresh with a model already loaded, the frontend was not
re-applying model-specific inference defaults (presence_penalty,
temperature, etc.) or restoring reasoning/tools support flags.
Backend: Add inference config, supports_reasoning, supports_tools,
and context_length to InferenceStatusResponse.
Frontend: In the refresh callback, when an active model is detected,
apply mergeRecommendedInference and restore reasoning/tools flags
with proper Qwen3.5 size-based defaults.
* studio: fix delete dialog closing before async completes
Prevent AlertDialogAction's default close behavior with
e.preventDefault() so the dialog stays open during deletion.
Also block onOpenChange dismiss while deleting is in progress.
* fix: add Dict and Any imports to inference models
* studio: fix Qwen3.5 reasoning threshold in frontend load path
The frontend loadModel handler had the old threshold (<=2) for
disabling reasoning on small Qwen3.5 models. Changed to <9 to
match the backend. This was causing 4B to not properly disable
thinking by default when auto-loaded.
* studio: move GGUF delete to per-variant level
For GGUF repos, the trash icon now appears on each downloaded variant
row inside the quantization expander instead of on the repo-level row.
Backend accepts optional variant param to delete specific GGUF files
(blob + symlink) rather than the entire repo cache.
* studio: restore ggufContextLength on page refresh
The Max Tokens slider was capped at 32768 on page refresh because
ggufContextLength was not restored from the status response.
Now set it from statusRes.context_length on reconnect.
* fix: remove <think> from Qwen3.5 response template marker
The train-on-responses-only feature uses template markers to find
where the assistant response starts. The Qwen3.5 response marker
included '<think>\n' which is only present when thinking mode is
enabled. With thinking disabled (default for <9B), the marker
never matched, causing 100% of samples to be dropped.
Changed response marker from '<|im_start|>assistant\n<think>\n'
to '<|im_start|>assistant\n' which works regardless of thinking mode.
* studio: fix sloth ASCII art alignment in training overlay
* fix: correct sloth ASCII art alignment to match Unsloth banner
* studio: add Python and terminal tool calling to chat
Register python and terminal tools alongside web search. Python
executor validates imports (stdlib only) via unsloth_zoo
rl_environments, runs code in a subprocess sandbox with 5-min
timeout and cancel support. Terminal executor blocks dangerous
commands (rm, sudo, etc.) and runs in a temp directory.
Update llama_cpp tool loop to show tool-specific status messages
and pass cancel_event through to executors. Rename composer
toggle from "Search" to "Tools" and show TerminalIcon for
execution status pills.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: fix Nemotron/transformers 5.x support, onboarding navigation, port binding
Backend:
- Dynamic transformers 5.x detection via tokenizer_config.json fetch
(checks for TokenizersBackend class, cached per-model)
- Bump transformers 5.x version from 5.2.0 to 5.3.0 across all workers,
setup scripts (setup.sh, setup.ps1)
- Auto-enable trust_remote_code for unsloth/* models needing transformers 5.x
(workaround for NemotronH config parsing bug in transformers)
- Auto-install mamba-ssm/causal-conv1d for SSM models (NemotronH, Falcon-H1)
with --no-build-isolation --no-deps to avoid torch version conflicts
- Add SO_REUSEADDR to port check in run.py (fixes Colab proxy stale connection
falsely reporting port as in-use)
Frontend:
- Fix "Skip to Chat" navigation: use window.location.href instead of React
Router navigate() to bypass useEffect redirect race
- Fix "Skip Onboarding" on splash: navigates to /studio (not /chat)
- Fix onboarding guard: only check isOnboardingDone() on initial mount
- Fix Chat card on step 1: add sr-only spacer for consistent alignment
- Fix Chat+Text both selected: clear RadioGroup value when Chat is selected
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: split tools toggle into Search and Code buttons
Replace the single "Tools" toggle with two independent toggles:
- "Search" (globe icon) enables web search only
- "Code" (terminal icon) enables Python and terminal execution
Add enabled_tools list field to the inference payload so the
backend only registers the tools the user has toggled on. Both
toggles appear in the main composer and the compare composer.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: fix tool calling import validation and error logging
Replace unsloth_zoo-dependent import checker with a standalone
ast-based validator using sys.stdlib_module_names. This properly
blocks non-stdlib imports (numpy, requests, etc.) and returns a
clear error message to the model so it can rewrite using only
stdlib.
Add full traceback to tool streaming error logs for debugging.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: parse gpt-oss harmony channels for clean safetensors chat output
gpt-oss models emit multi-channel output via harmony protocol tokens
(<|channel|>analysis<|message|>... and <|channel|>final<|message|>...).
TextIteratorStreamer with skip_special_tokens=True strips the special
tokens but leaves channel names concatenated with content, producing
garbled output like "analysisWe need to...assistantfinalHello!".
Add HarmonyTextStreamer that decodes with skip_special_tokens=False,
parses harmony markup via regex, and emits <think>analysis</think>
for the analysis channel and plain text for the final channel --
reusing the existing frontend reasoning UI.
Also expose supports_reasoning=True for non-GGUF gpt-oss models in
the /status endpoint so the frontend enables the Think toggle.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: use unsloth_zoo for Python sandbox validation
Set UNSLOTH_IS_PRESENT=1 and import check_python_modules and
check_signal_escape_patterns directly from unsloth_zoo instead
of a standalone fallback. This gives us the full Unsloth
validation including stdlib-only import checks and signal/timeout
escape pattern detection.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: allow all imports in Python tool sandbox
Remove stdlib-only import restriction. Keep signal escape
pattern detection via unsloth_zoo for safety.
* studio: fix ReadTimeout on tool streaming final pass
The 0.5s read timeout used for cancel-checking during streaming
also fires when waiting for the first response from llama-server
(e.g. reasoning model thinking for 15+ seconds). Add
_stream_with_retry() context manager that retries on ReadTimeout
while checking cancel_event, so the model has unlimited time to
think before producing the first token. Applied to both the
regular streaming path and the tool-calling final pass.
* fix: rewrite HarmonyTextStreamer with stateful incremental parsing
The delta-on-transformed approach had two critical bugs:
1. Before the full <|channel|>X<|message|> pattern was complete, the
strip-tokens fallback emitted "analysis" as plain text. Then when
the regex matched, _transform returned a completely different format
(<think>...</think>) and the delta was computed against the wrong
base string, producing fragments like "think>", "nk>", ">".
2. Even with full matches, the closing </think> tag shifted position
as content grew, so text[prev_len:] produced garbled deltas.
Replace with stateful incremental parsing that:
- Buffers until a complete channel+message pair is seen
- Emits <think> once when analysis channel first appears
- Streams analysis content deltas (computed on channel content directly)
- Emits </think> once when final channel first appears
- Streams final content deltas
- Closes open think tags in end()
Also skip the generic all_special_tokens stripping in
_clean_generated_text for gpt-oss since HarmonyTextStreamer already
produces clean output and the generic stripping was mangling <think>
tags.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* fix: strip all <|...|> tokens in gpt-oss cleanup, not just harmony subset
The gpt-oss tokenizer has added tokens like <|return|> (id=200002) that
are not part of the harmony channel protocol but can leak into output.
The previous regex only stripped channel|message|start|end tokens.
Broaden the _clean_generated_text regex for gpt-oss to <\|[a-z_]+\|>
which catches all pipe-delimited tokens (return, constrain, reserved,
etc.) without matching <think>/<\/think> tags.
Verified: gpt-oss all_special_tokens are only <|return|>,
<|reserved_200017|>, <|startoftext|> -- none overlap with <think>.
The harmony tokens (channel, message, start, end) are added_tokens
but not in all_special_tokens.
* fix: hide config-only model repos from cached models list
Repos that only have metadata/config files cached (no .safetensors or
.bin weight files) were showing up in the Downloaded list with tiny
sizes like "1.8 KB" or "24 KB". These are just leftover config
snapshots from architecture checks, not usable models.
Filter the cached-models endpoint to only include repos that contain
actual model weight files (.safetensors or .bin).
* studio: fix toast description text contrast in dark mode
Add explicit !text-muted-foreground to toast description classNames
so secondary text (e.g. "Releases VRAM and resets inference state.")
is readable in dark mode.
* studio: fix Chat card icon alignment with size-4 spacer
Replace sr-only span (takes no space) with a size-4 shrink-0 div
matching the RadioGroupItem dimensions in other cards, so the Chat
icon aligns vertically with Text/Audio/Vision/Embeddings icons.
---------
Co-authored-by: workspace <user@workspace.local>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Manan17 <shahmanan170602@gmail.com>
Co-authored-by: Roland Tannous <rolandtannous@gravityq.ai>
* fix(llm_assist): disable thinking mode for helper model JSON output
Pass enable_thinking=False to generate_chat_completion() in both
_run_with_helper() and _generate_with_backend() so the Qwen3.5-4B
helper model produces clean JSON instead of wrapping responses in
<think> tags.
* fix(llm_assist): log per-request enable_thinking=False override
Add info-level log lines so the user can see that each helper/advisor
request overrides the server-level thinking default to False.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* studio: switch helper model to Qwen3.5-4B-GGUF
Replace Qwen3-4B-Instruct-2507-GGUF with Qwen3.5-4B-GGUF as the
default helper model for LLM-assisted dataset detection. Same
UD-Q4_K_XL variant.
* studio: fix stale GGUF metadata when switching models (#4347)
Reset _supports_reasoning, _supports_tools, _context_length, and
_chat_template at the start of _read_gguf_metadata() to prevent
stale settings from a previous model leaking into the next load.
Co-authored-by: Daniel Han <daniel@unsloth.ai>
* studio: change login error to "Incorrect password", add reset-password CLI
- Login error now says "Incorrect password" instead of the generic
"Incorrect username or password" since Studio only has one account.
- Add `unsloth studio reset-password` command that deletes the auth
database so a fresh admin account with a new random password is
created on the next server start.
* studio: include reset command in login error message
* studio: change password setup subtitle wording
## Summary
- Add web search tool calling for GGUF models (Search toggle, DuckDuckGo via ddgs)
- Add KV cache dtype dropdown (f16/bf16/q8_0/q5_1/q4_1) in Chat Settings
- Fix Qwen3/3.5 inference defaults per official docs (thinking on/off params)
- Enable reasoning by default for Qwen3.5 4B and 9B
- Replace "Generating" toast with inline spinner
- Fix stop button via asyncio.to_thread (event loop no longer blocked)
- Fix CUDA 12 compat lib paths for llama-server on CUDA 13 systems
- Fix auto-load model name not appearing in selector
- Training progress messages + dataset_num_proc fix
Integrated PRs:
- #4327 (imagineer99): BETA badge alignment (already in tree)
- #4340 (Manan Shah): prioritize training models in model selection
- #4344 (Roland Tannous): setup.sh macOS python version compatibility
- #4345 (Manan Shah): revamp model+dataset checking logic
* studio: extract param count from model name as fallback
When HuggingFace API doesn't return totalParams for a model,
extract the param count from the model name (e.g. "Qwen3-0.6B"
-> "0.6B", "Llama-3.2-1B-Instruct" -> "1B"). Applied to both
the recommended list and HF search results.
* studio: read GGUF context_length via fast header parser, set max tokens
- Fast GGUF metadata reader (~30-55ms) parses only KV header, skips
tensor data and large arrays (tokenizer vocab etc)
- Extracts context_length and chat_template from GGUF metadata
- Returns context_length in LoadResponse for frontend to use
- Frontend sets maxTokens to actual context_length for GGUFs (e.g.
262144 for Qwen3.5-9B, 131072 for Qwen2.5-7B)
- Max Tokens slider shows "Max" and is locked for GGUFs
- Auto-load path also uses actual context_length from load response
- Toast auto-dismiss (5s) and close button for auto-load toast
* studio: GGUF TTS audio support (from PR #4318)
Add GGUF TTS audio generation via llama-server. When a GGUF model
loads, the backend probes its vocabulary to detect audio codecs
(SNAC/BiCodec/DAC/CSM/Whisper). If detected, the codec is pre-loaded
and the model is reported as audio to the frontend.
During chat, TTS models route to the audio generation path which sends
a per-codec prompt to llama-server's /completion endpoint, extracts
generated tokens/text, and decodes to WAV using AudioCodecManager.
Also strips base64 audio data from prior assistant messages to prevent
context overflow.
Co-authored-by: Manan Shah <mananshah511@gmail.com>
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Remove package-lock.json from tracking
* studio: per-model inference defaults, GGUF max tokens fix, reasoning toggle
- Add inference_defaults.json with per-model-family sampling parameters
for ~50 families (Qwen3.5, Qwen3, Gemma-3, Llama-3, DeepSeek, etc.).
Values sourced from unslothai/docs and Ollama params blobs.
- Family-based lookup in inference_config.py: extracts model family from
identifier, matches against patterns (longest match first), merges with
priority: model-specific YAML > family JSON > default.yaml.
- Fix GGUF Max Tokens slider locked at "Max": store ggufContextLength
separately from maxTokens so the slider is adjustable (step=64).
- Fix Ministral YAML: top_p was literal string "default", now 0.95.
- Add reasoning toggle for thinking models (Qwen3.5, Qwen3, DeepSeek-R1,
DeepSeek-V3.1, etc.): detect enable_thinking support from GGUF chat
template metadata, pass --jinja to llama-server, send
chat_template_kwargs per-request. Frontend shows "Reasoning is ON/OFF"
pill button next to attachment button in composer.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: remove default system prompt injection
Backend was injecting "You are a helpful AI assistant." when no system
prompt was provided. Neither unslothai/docs nor Ollama specify a default
system prompt for most models. Now defaults to empty string, letting the
model's own chat template handle system behavior.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: use lightbulb icons and "Think" label for reasoning toggle
Lightbulb on when thinking enabled, lightbulb-off when disabled.
Label is just "Think" in both states; grayed out styling when off.
* studio: fix HTML file upload breaking chat
Replace SimpleTextAttachmentAdapter with custom TextAttachmentAdapter
(excludes text/html) and HtmlAttachmentAdapter that strips tags via
DOMParser, removing scripts/styles and extracting readable text content
instead of dumping raw HTML markup into the conversation.
* studio: show chat template in Configuration panel
Display the model's Jinja2 chat template in a new "Chat Template"
section under Settings (now open by default). For GGUFs, reads from
GGUF metadata; for safetensors, reads from tokenizer.chat_template.
Template is editable with a "Restore default chat template" button
that appears when modified. Section only shows when a model with a
chat template is loaded.
* studio: editable chat template with Apply & Reload
Chat template section now functional:
- Editing the template shows "Apply & Reload" (reloads model with
custom template) and "Revert changes" buttons
- For GGUFs: writes template to temp .jinja file, passes
--chat-template-file to llama-server on reload
- For non-GGUF: passes chat_template_override in load request
- Settings section now open by default
- selectModel supports forceReload to reload same model
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio: fix DeepSeek reasoning detection and auto-load metadata
- Set _model_identifier before _read_gguf_metadata so DeepSeek
"thinking" template detection works (was always None before)
- Populate ggufContextLength, supportsReasoning, reasoningEnabled,
defaultChatTemplate in autoLoadSmallestModel GGUF path
* studio: add spacing before BETA badge in navbar
Add gap-1.5 on the logo Link container to space the BETA label
from the wordmark.
Co-authored-by: Imagineer99 <Imagineer99@users.noreply.github.com>
* studio: vertically center BETA badge with logo
---------
Co-authored-by: Manan Shah <mananshah511@gmail.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Imagineer99 <Imagineer99@users.noreply.github.com>
* Strip <think> blocks from LLM assist model output
* Add debug logging for raw LLM assist output
* Quiet llama-server logs, use structlog in llm_assist
* Fix think-tag stripping when response is inside tags
* Remove debug logging of raw model output
* Clarify GGUF download logs: show cache hit vs actual download
* Clarify heuristic-detected mapping in UI text
* Default helper model to Qwen3-4B-Instruct-2507 UD-Q4_K_XL
* Remove package-lock.json from tracking, add to .gitignore
* Auto-open mapping dialog on Start Training for custom_heuristic format
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Use last think block when extracting inner content (review feedback)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
The _VISION_CHECK_SCRIPT subprocess used logger.info() but logger was
never defined in the subprocess context. This caused a NameError on
every vision check, making all transformers 5.x models (Qwen3.5,
GLM, etc.) fall back to text-only mode even when they support vision.
Replace logger.info() with print() since the parent process reads
the subprocess stdout via result.stdout.
Move the sort logic from the backend to the frontend GgufVariantExpander
component where GPU VRAM info is available. The backend now does a simple
size-descending sort. The frontend pins the recommended variant at the
top, pushes OOM variants to the bottom, and sorts the rest by file size
descending (largest/best quality first).
The variants list was returned in HuggingFace file listing order (alphabetical),
making the dropdown confusing (e.g. BF16 before Q4_0). Now sorted as:
1. Recommended variant (from _pick_best_gguf) pinned at top
2. Other UD (Unsloth Dynamic) variants sorted by disk size ascending
3. Non-UD variants sorted by disk size ascending
Reorder _GGUF_QUANT_PREFERENCE so all UD (Unsloth Dynamic) variants
come before standard quants. UD-Q4_K_XL is the default (best
size/quality tradeoff), followed by other UD quants in decreasing
preference order.
For repos without UD variants (e.g., bartowski), falls through to
standard quants starting with Q4_K_M.
Verified with:
- unsloth/Qwen3.5-35B-A3B-GGUF -> UD-Q4_K_XL
- bartowski/Qwen_Qwen3.5-35B-A3B-GGUF -> Q4_K_M
- unsloth/DeepSeek-V3.2-GGUF -> UD-Q4_K_XL (9 shards)
- unsloth/Llama-3.2-1B-Instruct-GGUF -> UD-Q4_K_XL
Two changes for GGUF variant selection:
1. Default variant preference now starts with UD-Q4_K_XL (Unsloth
Dynamic quantization) which provides better quality per bit than
standard Q4_K_M. Also added UD-Q2_K_XL, UD-IQ2_M, UD-IQ1_M,
UD-IQ1_S as small fallback options.
2. If the selected variant doesn't fit on disk, automatically fall
back to the smallest GGUF variant in the repo that does fit.
Queries all GGUF file sizes via get_paths_info() and picks the
smallest one under the free disk space limit. If nothing fits,
raises a clear error.
This means users with limited disk space won't get a download
error -- they'll get a smaller quantization instead.
Set HF_HOME, HF_HUB_CACHE, HF_XET_CACHE, UV_CACHE_DIR, and
VLLM_CACHE_ROOT to a unified location under ~/.unsloth/studio/cache/
on startup. This keeps all model downloads, datasets, and caches
in one place instead of scattered across ~/.cache/huggingface,
~/.cache/uv, etc.
Layout:
~/.unsloth/studio/cache/
huggingface/ (HF_HOME)
hub/ (HF_HUB_CACHE -- model/dataset downloads)
xet/ (HF_XET_CACHE -- xet blob store)
uv/ (UV_CACHE_DIR -- uv package cache)
vllm/ (VLLM_CACHE_ROOT -- vllm compiled kernels)
Only sets variables that are not already in the environment, so
user overrides (e.g. HF_HOME=/data/models) are respected.
Cross-platform: uses Path.home() which resolves correctly on
Linux (~), macOS (~), and Windows (C:\Users\<user>).
* fix: disable remote code loading for ai-assist model hint lookup
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: Roland Tannous <115670425+rolandtannous@users.noreply.github.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Update CODEOWNERS for studio and cli
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
- Workers now compute backend_path and venv_t5 locally via Path(__file__)
- Moved .venv_t5 to ~/.unsloth/studio/.venv_t5
- Added ensure_studio_directories() call on server startup
- Expanded CLI studio command into sub-app with setup subcommand
Tier 1 check-format was picking images.zip over testmini.parquet,
causing wrong columns (image/label) and broken VLM mapping.
Also log first VLM conversion failure instead of swallowing silently.
