* Studio: GPU memory dropdown — llama.cpp --fit on and manual gpu-layers/cpu-moe
* Studio: simplify GPU memory changes (reuse ParamSlider, GPU_LAYERS_ALL, loadedGpuMemoryFields helper)
* Studio: GPU picker — choose which GPUs a GGUF model loads on (gpu_ids)
* Studio: simplify GPU picker (share /api/system fetch, validate gpu_ids)
* Studio: GPU picker review fixes (gate relative indices, no cross-model leak, validate, types)
* Studio: group GPU controls under a collapsible GPU section
* Studio: GPU feature review fixes (fix fit-ctx test, behavior-test the floor, comment accuracy)
* Studio: make GPU a top-level settings section (not nested under Model)
* Studio: flatten GPU controls into the Model section, group by GPU/context/generation
* Studio: move GPU Memory to the bottom of Model with its dependent controls beneath it
* Studio: move GPU Memory below Tensor Parallelism and GPUs below GPU Memory
* Studio: tighten GPU Memory and GPU Layers tooltip copy
* Studio: fix fit-mode context slider track-click, restore GPU Memory tooltip, shorten fit dropdown label
* Studio: GPU Memory tooltip one mode per line, briefer
* Studio: note HIP_VISIBLE_DEVICES (ROCm) in the GPUs picker tooltip
* Studio: narrow the GPU Memory dropdown to fit the shortened label
* Studio: use 'llama.cpp --fit' in the GPU Memory tooltip for consistency
* Studio: allow Tensor Parallelism in Manual GPU mode
* Studio: graduated MoE-on-CPU offload (--n-cpu-moe) replacing the all-or-nothing toggle
* Studio: size the MoE-offload slider for staged (deferred-load) models
* Studio: share one GGUF header walk for the context-length and MoE-count readers
* Studio: size the GPU Layers slider for staged models (one staged-header read)
* Studio: move Tensor Parallelism below the GPUs picker
* Studio: GPU split (--tensor-split) per-GPU model share in Manual mode
* Studio: tolerate whitespace in GPU split input, move it below GPU Layers
* Studio: rename the GPU split control to "Split ratio"
* Studio: Split ratio sends explicit even input; fix blank=free-VRAM (not even) copy
* Studio: tighten llama.cpp --fit VRAM margin with --fit-target 512
* Studio: GPU memory review fixes (rollback re-baseline, single-GPU TP gate, accurate copy)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Studio: move Split ratio below MoE Layers on CPU
* Studio: address PR review (fix GPU-info hydration race, share fit context-length across load paths)
* Studio: address codex review (manual single-GPU TP guard, GPU-aware spec defaults in fit/manual, GGUF-only context/preference)
* Studio: address codex review round 2 (gpu_present seed, single-GPU tensor-split guard, staged manual-knob reset, strip inherited offload flags)
* Studio: address codex review round 3 (strip inherited --n-cpu-moe, CPU-fallback warning in Manual mode)
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Studio: address codex review round 4 (preserve pinned fit context across a later Apply)
* Studio: address codex review round 5 (honor GPU picker for diffusion GGUFs, clear fit pin on cross-model switch)
* Studio: preserve the pending GPU Memory mode when staging a model
* Studio: pin diffusion GPU device order and reset GPU-memory state for diffusion loads
* Studio: address codex review round 6 (fit-Auto rollback context, preserve manual non-tensor split modes, persist GPU mode on load not select)
* Studio: persist the applied GPU Memory mode, not the requested one (skip diffusion loads)
* Studio: replace Manual-mode split-ratio field with per-GPU layer sliders
* Studio: clarify per-GPU layer split hint for tensor-parallel mode
* Studio: address codex review round 7 (allow GGUF gpu_ids past the legacy guard, replay GPU-memory fields on respawn)
* Studio: address codex review round 8 (size the validate preflight like the load in fit mode, across both load paths)
* Studio: skip the training-OOM guard for llama.cpp --fit GGUF loads (they spill to RAM)
* Studio: drop the now-redundant compare-path validate sizing (the --fit guard skip makes it moot)
* Studio: address codex review round 9 (keep the training guard for fit loads, forward gpu_ids to validate, strip inherited manual tensor-split)
* Studio: address codex review round 10 (gate GPU-memory adoption on is_gguf, record manual knobs only in Manual mode)
* Studio: handle diffusion GGUFs symmetrically in the GPU Memory controls (preserve the standing mode preference, hide the inapplicable mode/TP controls)
* Studio: remember the GPU Memory settings per model
* Studio: consolidate --fit mode and Manual mode into a single Manual mode
* Studio: preserve the per-GPU layer split across GPU Layers changes
* Studio: trim overly long GPU Memory comments
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* address GPU memory config review comments
* trim redundant GPU memory tests
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Reconcile manual-mode TP drops with the #6659 drop-site invariants
* Preserve quantized KV in manual --fit, charge GGUF companions in full, reconcile GPU pick on load
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Clear stale GPU baseline on non-GGUF loads so it can't read as dirty
* Fix no-context-shift test for the conditional -c flag
* Credit manual GPU-layer offload for cached HF GGUFs
* Reset per-model load knobs on GGUF quant switch
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Strip inherited tensor-split when manual ratio is cleared
* Match auto-load validation to safetensors placement
* Reset editable manual knobs after Auto GGUF loads
* Record a single device for diffusion GPU picks
* Reset per-model GPU knobs before applying saved settings
* Address review comments
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Guard manual tensor splits and keep remembered context on auto-load
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Snapshot compare knobs, seed splits from free VRAM, flag zero-offload loads
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Exempt CPU-only loads from the guard floor and harden compare and reseed paths
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Reach full offload from the layers slider and charge extras drafters in the guard
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Warm the GPU device cache before pick reconciles and disable staged GPU controls
* Align the training guard with inherited extras, spec mode, and compare targets
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Hide GPUs from companion-less zero-offload loads
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Size diffusion picks per device, own manual offload flags, reject XPU picks
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Drop tensor flags at zero layers and exempt CPU-pinned drafters
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Allowlist the zero-layer tensor parallel drop site
* Keep validate and load guards on the same extras and refresh stale baselines
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Drop mismatched manual tensor splits before launch
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Gate XPU picks on the real backend field and harden split and hydration paths
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Weight full GPUs as zero, clamp split shares, and refine the zero-layer mask gate
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Carry fit context across mode changes and align drafter and picker gates
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Catch variant switches, uncached diffusion repos, and text-only mmproj skips
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Check companions on the first device and size native and remote zero-layer loads
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Replace the training guard's precise VRAM modeling with a conservative bound
* Baseline context pins on non-GGUF hydration and reprobe list-seeded staged GGUFs
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Size manual splits by their largest share and preserve resolved context from Default
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Default-deny unsized required companions and price KV at the effective cache dtype
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Reserve MTP draft KV and MLA target-copy in the training guard
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Size tensor-parallel loads per device and show GPU controls for native GGUFs
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Reserve MTP overhead for uncached remote GGUFs and the mmproj runtime factor
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Drop the training-coexistence VRAM estimation this PR added
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Gate remembered load settings to GGUF picks
* Lock the remaining load-time controls during a staged load
* Clear the stale native-path token on compare loads
* Drop a stale guard reference from the zero-offload masking comment
* Seed GPU baselines from the rollback response and drop never-emitted offload flags
* Match validate's training guard to load and keep the native reload token
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Trim verbose GPU-memory comments
* Thread the variants header walk off the event loop, honor device pins on zero-offload, and hold staged GPU edits
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Honor manual placement and classify pinned zero-offload loads
* Close diffusion admission and status hydration gaps
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Check the actual diffusion GPU during training
* Align staged baselines and manual reload dedupe
* Fix GGUF placement and rollback state
* Harden manual GGUF placement boundaries
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Remove unused resolve_tensor_parallel import in llama_cpp.py
The name is used only in llama_server_args.py, routes/inference.py, and tests,
not in llama_cpp.py; the unused hoisted import trips the import-hoist verifier
in the source-lint CI job.
* Fix diffusion GPU dedup and training guard for non-numeric device tokens
The diffusion runner drives only its single lowest device and the backend
records that one device (self._gpu_ids = [sorted(gpu_ids)[0]]), but the reload
dedupe compared it against the full requested list, so a multi-GPU pick that
resolves to the same device forced a needless reload. Normalize the request the
same way for a loaded diffusion model in both _already_in_target_state and the
route _request_matches_loaded_settings.
The chat-during-training coexistence guard called int() on the single-device
token and hard-rejected when it could not parse. A non-numeric token (a CUDA
UUID / MIG handle) now sizes against the whole visible pool like the GGUF guard
instead of falsely blocking the load, and an empty token (a CPU-only runner such
as a CPU diffusion GGUF) is allowed outright since it uses no GPU VRAM.
* Tighten comments added by the GPU memory config changes
* Harden GGUF placement from independent review: VRAM sizing, diffusion TP reset, tensor_split validation
- Training coexistence guard: a single-device runner pinned through an
unresolvable UUID/MIG token was sized against the aggregate visible-VRAM pool,
so a load could pass on capacity it cannot use and then OOM active training.
Size against the worst-case visible device (min free) instead, keeping the
guard's documented default-deny contract. The empty-token (CPU-only runner)
allow path is unchanged.
- Diffusion startup: _start_diffusion_server now resets self._tensor_parallel to
False alongside the other placement resets. A prior tensor-parallel chat load
(process killed but not fully unload-reset) otherwise left /status misreporting
tensor parallelism and made an identical diffusion re-Apply reload against the
stale state.
- tensor_split: reject negative / non-finite / all-zero splits up front. They
were dropped at launch but still compared raw in the reload dedupe, so an
identical Apply reloaded indefinitely.
- Tests: the shared httpx stub was incomplete and, installed via setdefault
before real httpx loaded, broke a combined pytest run (collection errors on
httpx.Response). Import the real installed httpx instead.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: danielhanchen <unslothshared@gmail.com>
Co-authored-by: danielhanchen <danielhanchen@gmail.com>
* Studio: add 'Load on selection' toggle to configure load options before loading
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Studio: seed staged speculative decoding from the standing default
* Studio: address PR review for load-on-selection staging
* Studio: handle direct GGUF staging and stale-stage edge cases from load-on-selection review
* Studio: cancel replaced staged downloads and keep staged pick on load failure
* Studio: centralize staged-download cancel and guard staged-load restore
* fix: address staged GGUF load review
* fix: honor staged GGUF load metadata
* fix: clarify load-on-selection tooltip
Keep the load-on-selection hint visually anchored to the control and make the on/off behavior explicit without changing the broader deferred-load flow.
* Studio: reset orphaned staged knobs on abandon and cap Max Tokens to staged context
* Studio: remove dead code and cancel staged download when loading a different model
* fix: surface staged model in run settings before deferred load
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Lee Jackson <130007945+Imagineer99@users.noreply.github.com>
Co-authored-by: imagineer99 <samleejackson0@gmail.com>
Trim and tighten code comments and docstrings across studio/ Python. Comment-only: every changed file verified code-identical to main via AST/token comparison.
Raise ruff line-length to 100 and extend the local pre-commit format pipeline (def-signature magic-comma normalization, short multi-line assert collapse, kwarg '=' spacing, blank-line-after-short-import removal, adjacent string-literal / f-string+plain merge, redundant-pass pruning). Every transform re-checks the file AST and is dropped if it would differ; the whole-repo reformat is verified AST-identical per file and idempotent.
* Studio: enable audio input for Gemma 4 GGUF models
Audio file upload was disabled for Gemma 4 vision+audio GGUFs (e.g.
gemma-4-12b-it-GGUF) even though their mmproj carries an audio encoder
(clip.has_audio_encoder, gemma4ua). Two causes:
- Audio-input detection only matched Gemma 3n's <audio_soft_token>;
Gemma 4 uses <|audio|>, so audio_vlm was never detected.
- The GGUF load/status responses hardcoded has_audio_input=False, so the
flag was dropped even when audio_vlm was detected (affected Gemma 3n
GGUFs too).
Changes:
- Recognize <|audio|> alongside <audio_soft_token> in the llama-server
token probe and the tokenizer-config pattern.
- Read clip.has_audio_encoder from the mmproj as an independent,
model-agnostic signal (read_mmproj_audio_capability).
- Emit the computed has_audio_input on the GGUF load/status responses.
- Tests for the new pattern and the mmproj reader.
* Studio: default chat model and dataset helper to Qwen3.5-4B-MTP
Switch the auto-loaded chat default and the dataset-analysis helper GGUF
from gemma-4-E2B-it to unsloth/Qwen3.5-4B-MTP-GGUF (UD-Q4_K_XL).
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* fix(studio/mmproj): block cross-family projectors in flat local GGUF dirs (#5347)
When a flat local GGUF directory holds several unrelated models with their
own mmproj siblings, detect_mmproj_file() returned the first projector it
walked into. For the layout reported in #5347 (Qwen weights + a Gemma
mmproj in the same dir) that meant llama-server was launched with
--mmproj pointing at the Gemma projector, which fails to load and surfaces
as a confusing crash.
Disambiguation rules:
- Drop candidates whose family token (qwen/gemma/llama/mistral/phi/...)
disagrees with the model's family. Candidates with no recognised
family token (e.g. the HF-convention 'mmproj-F16.gguf') are kept.
- Among same-family candidates, prefer the one whose stem shares the
longest prefix with the model (Qwen3.5-9B mmproj beats Qwen3.5-35B
mmproj for a Qwen3.5-9B model).
- If every candidate is dropped, return None — better than attaching
a wrong projector and getting a server-launch failure.
Tests cover the cross-family block, multi-candidate prefix tie-break,
HF-convention 'mmproj-F16.gguf', unrecognised families, and the
existing search_root walk.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio/mmproj: word-bounded family match, expanded token list, launcher guard
Tighten the family-token detector to match only on word boundaries so
substring collisions stop tagging false families: phi no longer matches
sapphire, yi no longer matches yip, mimo no longer matches mimosa, and
mistral does not bleed into ministral/magistral/devstral. Pick the token
whose first occurrence is leftmost in the filename rather than the first
hit in tuple order, so merge models disambiguate predictably (llama-phi
tags llama; phi-llama tags phi).
Expand _MODEL_FAMILY_TOKENS with the families an audit of the unsloth
HF org turned up that the previous list missed: devstral, ministral,
magistral (Mistral-derivative naming), nemotron, kimi, nanonets, cosmos,
mimo, apriel, lfm. Without these, a flat local GGUF directory containing
one of these weights plus an unrelated renamed projector still hit the
original #5347 failure.
Add mmproj_matches_model_family() and call it at the llama-server launch
site in core/inference/llama_cpp.py. detect_mmproj_file already drops
cross-family candidates at discovery time, but mmproj_path can also reach
the launcher via config injection or future overrides; this guard keeps
those paths from silently loading a known-wrong projector.
Tests: 12 new cases covering substring rejection, leftmost-position
selection, new family tokens, a new flat-dir Nemotron + Gemma rejection
case, and the launcher-level guard. All 21 detect_mmproj_file tests and
the existing 106 llama_cpp tests pass.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* studio/mmproj: pair via GGUF general.* metadata, not just filenames
Real Unsloth vision GGUFs carry rich identity metadata that has been
ignored by the discovery path. Every projector under the unsloth org
has general.type='mmproj' plus general.base_model.0.repo_url pointing
at the same upstream HF repo as its weight, and the equivalent
basename, base_model.0.name, and base_model.0.organization fields. A
flat-dir mismatch is therefore decidable from the headers alone, no
matter how the user has renamed the files.
Add utils/models/gguf_metadata.py with read_gguf_general_metadata():
a fast (~30 ms) header walk that pulls only the general.* string
fields and skips everything else, cached by (resolved path, mtime_ns,
size). Mirrors the parser shape already used by
LlamaCppBackend._read_gguf_metadata so the format handling is
consistent.
is_mmproj_by_metadata() returns True/False/None from general.type,
and pairing_score() returns 100 for an exact base_model URL match,
80 for basename plus organization match, 60 for basename only, -1
for definitive metadata disagreement, and 0 when neither side has
enough metadata to decide.
Rewire detect_mmproj_file() to a two-stage selector:
1. Detect projectors via metadata (general.type) when present, else
fall back to the filename substring heuristic. This recovers
headerless projectors AND projectors whose name does not contain
'mmproj' but whose header advertises one.
2. Score each candidate against the weight via pairing_score. Drop
candidates with score -1 (definitive metadata disagreement). For
candidates with score 0 (no usable metadata) fall back to the
existing filename family-token check, dropping recognised-family
mismatches. Pick the survivor with the highest (score,
longest_prefix, -len(stem)) tuple, so a metadata URL match
always wins over a filename-prefix match.
Tests: 16 new cases. tests/test_gguf_metadata.py covers the parser
(missing file, non-GGUF, string extraction, walking past arrays and
uint32s, cache invalidation by mtime/size) and the score helpers.
tests/test_detect_mmproj_file.py adds end-to-end cases that synthesise
real on-disk GGUF headers: URL match wins over a longer-prefix
sibling, URL mismatch returns None even when filenames match, a
projector named 'vision-projector.gguf' is still discovered via
general.type, and a 100-score header match outranks a near-perfect
filename prefix on a headerless candidate.
All 75 tests across detect_mmproj_file, gguf_metadata, llama_cpp
load progress, cached gguf routes, trained model scan, and vision
cache pass.
* studio/mmproj: shorten comments and docstrings across the #5347 changes
Trim verbose explanations to one-line statements of intent. The
behaviour is unchanged: 161 tests across detect_mmproj_file,
gguf_metadata, llama_cpp_load_progress (+ matrix), llama_server_args,
llama_cpp_cache_aware_disk_check, trained_model_scan, and vision_cache
all pass.
* studio/mmproj: shorten remaining detect_mmproj_file body comments
Trim the docstring and the dir-walking block comments inside
detect_mmproj_file to one-liners. Behaviour unchanged; 44 mmproj +
gguf_metadata + llama_cpp_load_progress tests pass.
* studio/mmproj: cap gguf_metadata cache below ceiling on every insert
The eviction branch popped exactly one entry when len >= max, so the
cache size could only converge to the cap when entries were added
slowly enough for natural growth. After a sandbox sim that reduced
the cap mid-run, len stayed above the cap because each insert popped
one and added one. Switch to a while loop so we evict until len is
strictly below the cap before inserting. Steady-state behaviour at
the default 4096 ceiling is unchanged.
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Daniel Han <danielhanchen@gmail.com>
oobabooga