# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-03-16 17:01+0000\n" "PO-Revision-Date: 2025-07-02 06:59+0000\n" "Last-Translator: Natasha Ament \n" "Language-Team: Dutch \n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 5.12.2\n" #. Reports the problems and decide whether to continue or not. #. #. @param elements [Array] List of unsupported elements. #: service/lib/agama/autoyast/profile_reporter.rb:51 #, perl-brace-format msgid "Found unsupported elements in the AutoYaST profile: %{keys}." msgstr "Niet-ondersteunde elementen in het AutoYaST-profiel gevonden: %{keys}." #. Implementation for the API method #Probe. #: service/lib/agama/dbus/storage/dasd.rb:68 #, fuzzy msgid "Probing DASD devices" msgstr "Onderzoeken van opslag apparaten" #. The configuration could take long time (e.g., formatting devices). It is important to #. not block the service in order to make possible to attend other requests. #: service/lib/agama/dbus/storage/dasd.rb:94 msgid "Configuring DASD" msgstr "" #. Do not configure if there is nothing to change. #: service/lib/agama/dbus/storage/iscsi.rb:80 msgid "Configuring iSCSI" msgstr "" #. Performs an iSCSI discovery. #. #. @param serialized_options [String] Serialized dicovery options. #. @return [Number] 0 success; 1 failure. #: service/lib/agama/dbus/storage/iscsi.rb:105 msgid "Performing iSCSI discovery" msgstr "" #. Implementation for the API method #Install. #: service/lib/agama/dbus/storage/manager.rb:187 msgid "Preparing bootloader proposal" msgstr "Voorbereiden bootloader voorstel" #: service/lib/agama/dbus/storage/manager.rb:190 msgid "Preparing the storage devices" msgstr "Voorbereiden van de opslag apparaten" #: service/lib/agama/dbus/storage/manager.rb:193 msgid "Writing bootloader sysconfig" msgstr "Schrijven van de bootloader sysconfig" #. Implementation for the API method #Finish. #: service/lib/agama/dbus/storage/manager.rb:201 #, fuzzy msgid "Finishing installation" msgstr "Installatie annuleren" #. Implementation for the API method #Umount. #: service/lib/agama/dbus/storage/manager.rb:208 #, fuzzy msgid "Unmounting devices" msgstr "Ontkoppelen van opslag apparaten" #. after loading config try to apply it, so proper packages can be requested #. TODO: generate also new issue from configuration #: service/lib/agama/dbus/storage/manager.rb:237 msgid "Activating storage devices" msgstr "Activeren van opslag apparaten" #: service/lib/agama/dbus/storage/manager.rb:240 msgid "Probing storage devices" msgstr "Onderzoeken van opslag apparaten" #: service/lib/agama/dbus/storage/manager.rb:243 #, fuzzy msgid "Applying storage configuration" msgstr "Aanpassen van de opslag configuratie" #. TRANSLATORS: SSL certificate details #: service/lib/agama/ssl/certificate_details.rb:31 msgid "Certificate:" msgstr "Certificaat:" #: service/lib/agama/ssl/certificate_details.rb:31 msgid "Issued To" msgstr "Uitgegeven aan" #: service/lib/agama/ssl/certificate_details.rb:32 msgid "Issued By" msgstr "Uitgegeven door" #: service/lib/agama/ssl/certificate_details.rb:32 msgid "SHA1 Fingerprint: " msgstr "SHA1 vingerafdruk: " #: service/lib/agama/ssl/certificate_details.rb:34 msgid "SHA256 Fingerprint: " msgstr "SHA256 vingerafdruk: " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:46 msgid "Common Name (CN): " msgstr "Normale naam (CN): " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:48 msgid "Organization (O): " msgstr "Organisatie (O): " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:50 msgid "Organization Unit (OU): " msgstr "Organisatie eenheid (OU): " #. Issue when the device has several users. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:74 #, c-format msgid "The device with alias '%s' is used by more than one device" msgstr "Het apparaat met alias '%s' wordt door meer dan een apparaat gebruikt" #. Issue when the device has both filesystem and a user. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:95 #, c-format msgid "" "The device with alias '%s' cannot be formatted because it is used by other " "device" msgstr "" "Het apparaat met alias '%s' kan niet worden geformatteerd omdat deze wordt " "gebruikt door een ander apparaat" #. Issue when the device has both partitions and a user. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:118 #, c-format msgid "" "The device with alias '%s' cannot be partitioned because it is used by other " "device" msgstr "" "Het apparaat met alias '%s' kan niet worden gepartitioneerd omdat deze wordt " "gebruikt door een ander apparaat" #. Error if a boot device is required and unknown. #. #. This happens when the config solver is not able to infer a boot device, see #. {ConfigSolvers::Boot}. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/boot.rb:75 msgid "The boot device cannot be automatically selected" msgstr "Het opstart apparaat kan niet automatisch worden geselecteerd" #. TRANSLATORS: %s is replaced by a device alias (e.g., "boot"). #: service/lib/agama/storage/config_checkers/boot.rb:86 #, c-format msgid "There is no boot device with alias '%s'" msgstr "Er is geen opstart apparaat met alias '%s'" #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:73 #, perl-brace-format msgid "" "No passphrase provided (required for using the method '%{crypt_method}')." msgstr "" "Geen wachtwoordzin opgegeven (vereist bij gebruik van methode '%" "{crypt_method}')." #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:89 #, perl-brace-format msgid "Encryption method '%{crypt_method}' is not available in this system." msgstr "" "Encryptie methode '%{crypt_method}' is niet beschikbaar op dit systeem." #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:117 #, perl-brace-format msgid "'%{crypt_method}' is not a suitable method to encrypt the device." msgstr "" "'%{crypt_method}' is een niet geschikte methode om het apparaat te " "versleutelen." #. TRANSLATORS: %s is replaced by a mount path (e.g., "/home"). #: service/lib/agama/storage/config_checkers/filesystem.rb:75 #, c-format msgid "Missing file system type for '%s'" msgstr "Ontbrekend bestandssysteem voor '%s'" #. TRANSLATORS: %{filesystem} is replaced by a file system type (e.g., "Btrfs") and #. %{path} is replaced by a mount path (e.g., "/home"). #: service/lib/agama/storage/config_checkers/filesystem.rb:98 #, perl-brace-format msgid "The file system type '%{filesystem}' is not suitable for '%{path}'" msgstr "" "Het bestandssysteemtype '%{filesystem}' is niet geschikt voor '%{path}'" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/logical_volume.rb:82 #, c-format msgid "There is no LVM thin pool volume with alias '%s'" msgstr "Er is geen LVM thin pool volume met alias '%s'" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "md1"). #: service/lib/agama/storage/config_checkers/md_raid.rb:98 #, c-format msgid "There is no MD RAID member device with alias '%s'" msgstr "Er is geen apparaat dat is lid is van een MD RAID met alias '%s'" #. Issue if the MD RAID level is missing and the device is not reused. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:111 msgid "There is a MD RAID without level" msgstr "Er is een MD RAID zonder niveau" #. Issue if the MD RAID does not contain enough member devices. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:124 #, c-format msgid "At least %s devices are required for %s" msgstr "Ten minste %s apparaten zijn benodigd voor %s" #. Issue if the device member is deleted. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:171 #, perl-brace-format msgid "" "The device '%{member}' cannot be deleted because it is part of the MD RAID %" "{md_raid}" msgstr "" "Het apparaat '%{member}' kan niet worden verwijderd omdat het onderdeel is " "van MD RAID %{md_raid}" #. Issue if the device member is resized. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:194 #, perl-brace-format msgid "" "The device '%{member}' cannot be resized because it is part of the MD RAID %" "{md_raid}" msgstr "" "Het apparaat '%{member} kan niet van grootte veranderen omdat deze deel is " "van MD RAID %{md_raid}" #. Issue if the device member is formatted. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:217 #, perl-brace-format msgid "" "The device '%{member}' cannot be formatted because it is part of the MD RAID " "%{md_raid}" msgstr "" "Het apparaat '%{member} kan niet worden geformateerd omdat het onderdeel is " "van MD RAID %{md_raid}" #. Issue if the device member is partitioned. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:240 #, perl-brace-format msgid "" "The device '%{member}' cannot be partitioned because it is part of the MD " "RAID %{md_raid}" msgstr "" "Het apparaat '%{member}' kan niet worden gepartitioneerd omdat het onderdeel " "is van MD RAID %{md_raid}" #. Issue if the device member is used by other device (e.g., as target for physical volumes). #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:262 #, perl-brace-format msgid "" "The device '%{member}' cannot be used because it is part of the MD RAID %" "{md_raid}" msgstr "" "Het apparaat '%{member}' kan niet worden gebruikt omdat het onderdeel is van " "MD RAID %{md_raid}" #. Issue if the parent of the device member is formatted. #. #. @param device [Y2Storage::BlkDevice] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:287 #, perl-brace-format msgid "" "The device '%{device}' cannot be formatted because it is part of the MD RAID " "%{md_raid}" msgstr "" "Het apparaat '%{device}' kan niet worden geformateerd omdat deze onderdeel " "is van MD RAID %{md_raid}" #. TRANSLATORS: 'method' is the identifier of the method to encrypt the device #. (e.g., 'luks1'). #: service/lib/agama/storage/config_checkers/physical_volumes_encryption.rb:61 #, perl-brace-format msgid "'%{method}' is not a suitable method to encrypt the physical volumes." msgstr "" "'%{method}' is geen geschikte methode voor het versleutelen van fysieke " "volumes." #. TRANSLATORS: %s is replaced by a device name (e.g., "/dev/vda"). #: service/lib/agama/storage/config_checkers/search.rb:74 #, c-format msgid "Mandatory device %s not found" msgstr "Verplicht apparaat %s niet gevonden" #. TRANSLATORS: %s is replaced by a device type (e.g., "drive"). #: service/lib/agama/storage/config_checkers/search.rb:77 #, c-format msgid "Mandatory %s not found" msgstr "Verplicht(e) %s niet gevonden" #. @return [String] #: service/lib/agama/storage/config_checkers/search.rb:85 msgid "drive" msgstr "Schijf" #: service/lib/agama/storage/config_checkers/search.rb:87 msgid "MD RAID" msgstr "MD RAID" #: service/lib/agama/storage/config_checkers/search.rb:89 msgid "partition" msgstr "partitie" #: service/lib/agama/storage/config_checkers/search.rb:91 msgid "LVM logical volume" msgstr "LVM logisch volume" #: service/lib/agama/storage/config_checkers/search.rb:93 msgid "device" msgstr "apparaat" #. Issue if the volume group name is missing. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/volume_group.rb:77 msgid "There is a volume group without name" msgstr "Er is een volume groep zonder naam" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:109 #, c-format msgid "There is no LVM physical volume with alias '%s'" msgstr "Er is geen fysiek LVM volume met alias '%s'" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:136 #, c-format msgid "" "The list of target devices for the volume group '%s' is mixing reused " "devices and new devices" msgstr "" "De lijst van doel apparaaten voor volume groep '%s' is mengt hergebruikte en " "nieuwe apparaten" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "disk1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:156 #, c-format msgid "There is no target device for LVM physical volumes with alias '%s'" msgstr "Er is geen doelapparaat voor fysieke LVM volumes met alias '%s'" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "disk1"). #: service/lib/agama/storage/config_checkers/volume_groups.rb:66 #, c-format msgid "" "The device '%s' is used several times as target device for physical volumes" msgstr "" "Het apparaat '%s' is meerdere keren gebruikt al doel apparaat voor fysieke " "volumes" #. Text of the reason preventing to shrink because there is no content. #. #. @return [String, nil] nil if there is content or there is any other reasons. #: service/lib/agama/storage/device_shrinking.rb:151 msgid "" "Neither a file system nor a storage system was detected on the device. In " "case the device does contain a file system or a storage system that is not " "supported, resizing will most likely cause data loss." msgstr "" "Er is geen bestandssysteem of opslag systeem gedetecteerd op het apparaat. " "In het geval dat het apparaat wel een bestandssysteem of opslagsysteem dat " "niet wordt ondersteund, zal het aanpassen van de grootte zeer waarschijnlijk " "leiden tot gegevensverlies." #. Text of the reason preventing to shrink because there is no valid minimum size. #. #. @return [String, nil] nil if there is a minimum size or there is any other reasons. #: service/lib/agama/storage/device_shrinking.rb:162 msgid "Shrinking is not supported by this device" msgstr "Verkleinen wordt niet ondersteund door dit apparaat" #. Copy /etc/nvme/host* to keep NVMe working after installation, bsc#1238038 #: service/lib/agama/storage/finisher.rb:126 msgid "Copying important installation files to the target system" msgstr "" "Belangrijke installatie bestanden worden gekopieerd naar het doel systeem" #. Step to write the bootloader configuration #: service/lib/agama/storage/finisher.rb:161 msgid "Installing bootloader" msgstr "Bootloader wordt geinstalleerd" #. Step to finish the Y2Storage configuration #: service/lib/agama/storage/finisher.rb:178 msgid "Adjusting storage configuration" msgstr "Aanpassen van de opslag configuratie" #. Step to finish the iSCSI configuration #: service/lib/agama/storage/finisher.rb:189 msgid "Adjusting iSCSI configuration" msgstr "Aanpassen van de iSCSI configuratie" #. Step to configure the file-system snapshots #: service/lib/agama/storage/finisher.rb:200 msgid "Configuring file systems snapshots" msgstr "Configureer snapshots van het bestandssysteem" #. Returns an issue if there is no candidate device for installation #. #. @return [Issue, nil] #: service/lib/agama/storage/manager.rb:251 #, fuzzy msgid "There is no suitable device for installation" msgstr "Geen apparaat geselecteerd voor installatie" #. Issue representing the proposal is not valid. #. #. @return [Issue] #: service/lib/agama/storage/proposal.rb:305 msgid "Cannot calculate a valid storage setup with the current configuration" msgstr "" "Kan geen geldige opslag configuratie berekenen met de huidige configuratie" #. Issue to communicate a generic Y2Storage error. #. #. @return [Issue] #: service/lib/agama/storage/proposal.rb:315 msgid "A problem ocurred while calculating the storage setup" msgstr "Een probleem is ontstaan bij het berekenen van de opslag opstelling" #. Step to copy the installation logs #: service/lib/agama/storage/umounter.rb:112 msgid "Copying logs" msgstr "Kopieren van logs" #. Step to unmount the target file-systems #: service/lib/agama/storage/umounter.rb:146 msgid "Unmounting storage devices" msgstr "Ontkoppelen van opslag apparaten" #. Activates the controller if it is not active yet. #. #. @note: If "allow_lun_scan" is active, then all its LUNs are automatically activated. #. #. @param controller [Controller] #. @return [Boolean] Whether the controller was activated. #: service/lib/agama/storage/zfcp/manager.rb:206 #, c-format msgid "The zFCP controller %s cannot be activated" msgstr "" #. Activates a device if it is not active yet. #. #. @param device [Device] #. @return [Boolean] Whether the device was activated. #: service/lib/agama/storage/zfcp/manager.rb:239 #, fuzzy, c-format msgid "The zFCP device %s cannot be activated" msgstr "Het opstart apparaat kan niet automatisch worden geselecteerd" #. Deactivates a device if it is active. #. #. @note: If "allow_lun_scan" is active, then the disk cannot be deactivated. #. #. @param device [Device] #. @return [Boolean] Whether the device was deactivated. #: service/lib/agama/storage/zfcp/manager.rb:277 #, fuzzy, c-format msgid "The zFCP device %s cannot be deactivated" msgstr "Het opstart apparaat kan niet automatisch worden geselecteerd" #. Issue if the controller is missing. #. #. @param channel [String] #. @return [Issue, nil] #: service/lib/agama/storage/zfcp/manager.rb:307 #, c-format msgid "Unknown zFCP controller %s" msgstr "" #. Issue if the device is missing. #. #. @param device_config [Configs::Device] #. @return [Issue, nil] #: service/lib/agama/storage/zfcp/manager.rb:326 #, c-format msgid "Unknown zFCP LUN %s" msgstr "" #~ msgid "Logout iSCSI targets" #~ msgstr "iSCSI doelen uitloggen" #, fuzzy #~ msgid "Discover iSCSI targets" #~ msgstr "iSCSI doelen inloggen" #~ msgid "Login iSCSI targets" #~ msgstr "iSCSI doelen inloggen" #, c-format #~ msgid "Cannot login to iSCSI target %s" #~ msgstr "Kan niet inloggen op iSCSI doel %s" #~ msgid "Analyze disks" #~ msgstr "Analyseer schijven" #~ msgid "Configure software" #~ msgstr "Configureer software" #~ msgid "Prepare disks" #~ msgstr "Prepareer schijven" #~ msgid "Install software" #~ msgstr "Installeer software" #~ msgid "Configure the system" #~ msgstr "Configureer het systeem" #~ msgid "Load software translations" #~ msgstr "Laad software vertalingen" #~ msgid "Load storage translations" #~ msgstr "Laad opslag vertalingen" #~ msgid "" #~ "Trying to import a self signed certificate. Do you want to trust it and " #~ "register the product?" #~ msgstr "" #~ "Probeer een zelf ondertekend certificaat te importeren. Wil je deze " #~ "vertrouwen en het product registreren?" #~ msgid "Try again" #~ msgstr "Opnieuw proberen" #~ msgid "Continue anyway" #~ msgstr "Toch doorgaan" #~ msgid "Skip" #~ msgstr "Overslaan" #~ msgid "Yes" #~ msgstr "Ja" #~ msgid "No" #~ msgstr "Nee" #, perl-brace-format #~ msgid "" #~ "No checksum for the file %{file} was found in the repository. This means " #~ "that although the file is part of the signed repository, the list of " #~ "checksums does not mention this file. Use it anyway?" #~ msgstr "" #~ "Geen controlesom voor het bestand %{file} gevonden in de opslagruimte. " #~ "Dit betekent dat hoewel het bestand onderdeel is van een ondertekende " #~ "opslagruimtec, de lijst met controlesommen dit bestand niet vermeld. " #~ "Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The checksum of the file %{file} is \"%{digest}\" but the expected " #~ "checksum is unknown. This means that the origin and integrity of the file " #~ "cannot be verified. Use it anyway?" #~ msgstr "" #~ "De controlesom van het bestand %{file} is %{digest} maar de verwachte " #~ "controlesom is onbekend. De herkomst en integriteit van het bestand kan " #~ "niet worden gecontroleerd. Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The expected checksum of file %{file} is \"%{found}\" but it was expected " #~ "to be \"%{expected}\". The file has changed by accident or by an attacker " #~ "since the creater signed it. Use it anyway?" #~ msgstr "" #~ "De verwachte controlesom van bestand %{file} is \"%{found}\" maar de " #~ "waarde bleek \"%{expected}\". Het bestand is per ongeluk gewijzigd of is " #~ "door een aanvaller aangepast nadat deze door de maker is gesigneerd. " #~ "Desondanks gebruiken?" #~ msgid "There was a problem running a package script." #~ msgstr "" #~ "Er is een probleem ontstaan tijdens het uitvoeren van een package script." #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is not digitally signed. The origin " #~ "and integrity of the file cannot be verified. Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} van %{repo_url} is niet digitaal ondertekend. De " #~ "herkomst en integriteit van het bestand kan niet worden gecontroleerd. " #~ "Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is not digitally signed. The origin and integrity of " #~ "the file cannot be verified. Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} is niet digitaal ondertekend. De herkomst en " #~ "integriteit van het bestand kan niet worden gecontroleerd. Desondanks " #~ "gebruiken?" #, perl-brace-format #~ msgid "" #~ "The key %{id} (%{name}) with fingerprint %{fingerprint} is unknown. Do " #~ "you want to trust this key?" #~ msgstr "" #~ "De sleutel {id} (%{name}) met vingerafdruk %{fingerprint} is onbekend. " #~ "Vertrouwt u deze sleutel?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is digitally signed with the " #~ "following unknown GnuPG key: %{key_id}. Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} van %{repo_url} is digitaal ondertekend met de " #~ "volgende onbekende GnuPG sleutel: %{key_id}. Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is digitally signed with the following unknown GnuPG " #~ "key: %{key_id}. Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} is digitaal ondertekend met de volgende onbekende " #~ "GnuPG sleutel: %{key_id}. Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is digitally signed with the " #~ "following GnuPG key, but the integrity check failed: %{key_id} (%" #~ "{key_name}). Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} van %{repo_url} is digitaal ondertekend met de " #~ "volgende GnuPG sleutel, maar de integriteitscontrole is mislukt: %" #~ "{key_id} (%{key_name}). Desondanks gebruiken?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is digitally signed with the following GnuPG key, " #~ "but the integrity check failed: %{key_id} (%{key_name}). Use it anyway?" #~ msgstr "" #~ "Het bestand %{filename} is digitaal ondertekend met de volgende GnuPG " #~ "sleutel, maar de integriteitscontrole is mislukt: %{key_id} (%" #~ "{key_name}). Desondanks gebruiken?" #~ msgid "Trust" #~ msgstr "Vertrouwen" #~ msgid "Refreshing repositories metadata" #~ msgstr "Metadata van opslagruimtes verversen" #~ msgid "Calculating the software proposal" #~ msgstr "Berekenen van het softwarevoorstel" #~ msgid "Initializing sources" #~ msgstr "Bronnen initialiseren" #, c-format #~ msgid "Adding service '%s' failed." #~ msgstr "Toevoegen service '%s' mislukt." #, c-format #~ msgid "Updating service '%s' failed." #~ msgstr "Updaten van service '%s' milsukt." #, c-format #~ msgid "Saving service '%s' failed." #~ msgstr "Opslaan service '%s' mislukt." #, c-format #~ msgid "Refreshing service '%s' failed." #~ msgstr "Verversen service '%s' milsukt." #, c-format #~ msgid "Removing service '%s' failed." #~ msgstr "Verwijderen service '%s' mislukt." #, c-format #~ msgid "Could not read repository \"%s\"" #~ msgstr "Kan opslagruimte \"%s\" niet lezen" #~ msgid "Product not selected yet" #~ msgstr "Nog geen product geselecteerd" #~ msgid "Product must be registered" #~ msgstr "Product moet geregistreerd zijn" #, c-format #~ msgid "Found %s dependency issues." #~ msgstr "%s afhankelijkheidsissues gevonden." #~ msgid "Writing Linux Security Modules configuration" #~ msgstr "Wegschrijven configuratie van Linux beveiligingsmodules" #~ msgid "Running user-defined scripts" #~ msgstr "Uitvoeren van gebruiker-gedefinieerde scripts" #~ msgid "Deploying user-defined files" #~ msgstr "Uitrol van gebruiker-gedefinieerde bestanden" #~ msgid "Calculating the storage proposal" #~ msgstr "Berekenen van het opslagvoorstel" #~ msgid "Adding storage-related packages" #~ msgstr "Toevoegen opslag gerelateerde pakketten" #, perl-brace-format #~ msgid "The following selected device is not found in the system: %{devices}" #~ msgid_plural "" #~ "The following selected devices are not found in the system: %{devices}" #~ msgstr[0] "" #~ "Het volgende, geselecteerde apparaat is niet gevonden in het systeem: %" #~ "{devices}" #~ msgstr[1] "" #~ "De volgende, geselecteerde apparaten zijn niet gevonden in het systeem: %" #~ "{devices}" #~ msgid "" #~ "Defining a user, setting the root password or a SSH public key is required" #~ msgstr "" #~ "Het aanmaken van een gebruiker, het instellen van een root password of " #~ "een publieke SSH sleutel is vereist" #~ msgid "Selecting Linux Security Modules" #~ msgstr "Selecteren van Linux beveiligingsmodules" #, perl-brace-format #~ msgid "The file %{filename} from repository %{repo_name} (%{repo_url})" #~ msgstr "Het bestand %{filename} van opslagruimte %{repo_name} (%{repo_url})" #, perl-brace-format #~ msgid "The file %{filename}" #~ msgstr "Het bestand %{filename}" #~ msgid "No device found for a mandatory drive" #~ msgstr "Geen apparaat gevonden voor een vereiste schijf" #~ msgid "No device found for a mandatory partition" #~ msgstr "Geen apparaat gevonden voor een vereiste partitie" #~ msgid "Cannot accommodate the required file systems for installation" #~ msgstr "Kan de vereiste bestandssystemen voor installatie niet toepassen"