# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-02-13 10:41+0000\n" "PO-Revision-Date: 2025-08-09 13:59+0000\n" "Last-Translator: Javier Llorente \n" "Language-Team: Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 5.12.2\n" #. Reports the problems and decide whether to continue or not. #. #. @param elements [Array] List of unsupported elements. #: service/lib/agama/autoyast/profile_reporter.rb:51 #, perl-brace-format msgid "Found unsupported elements in the AutoYaST profile: %{keys}." msgstr "" "Se han encontrado elementos no admitidos en el perfil de AutoYaST: %{keys}." #. Implementation for the API method #Probe. #: service/lib/agama/dbus/storage/dasd.rb:64 #, fuzzy msgid "Probing DASD devices" msgstr "Probando los dispositivos de almacenamiento" #. Performs the configuration process in a separate thread. #. #. The configuration could take long time (e.g., formatting devices). It is important to not #. block the service in order to make possible to attend other requests. #. #. @raise if there is an unfinished configuration. #. #. @param config_json [Hash] #: service/lib/agama/dbus/storage/dasd.rb:121 msgid "Configuring DASD" msgstr "" #. Do not configure if there is nothing to change. #: service/lib/agama/dbus/storage/iscsi.rb:98 msgid "Configuring iSCSI" msgstr "" #. Performs an iSCSI discovery. #. #. @param serialized_options [String] Serialized dicovery options. #. @return [Number] 0 success; 1 failure. #: service/lib/agama/dbus/storage/iscsi.rb:122 msgid "Performing iSCSI discovery" msgstr "" #. Implementation for the API method #Install. #: service/lib/agama/dbus/storage/manager.rb:118 msgid "Preparing bootloader proposal" msgstr "Preparando la propuesta del gestor de arranque" #: service/lib/agama/dbus/storage/manager.rb:121 msgid "Preparing the storage devices" msgstr "Preparando los dispositivos de almacenamiento" #: service/lib/agama/dbus/storage/manager.rb:124 msgid "Writing bootloader sysconfig" msgstr "Escribiendo el gestor de arranque sysconfig" #. Implementation for the API method #Finish. #: service/lib/agama/dbus/storage/manager.rb:132 #, fuzzy msgid "Finishing installation" msgstr "Cancelar instalación" #: service/lib/agama/dbus/storage/manager.rb:138 #, fuzzy msgid "Unmounting devices" msgstr "Desmontando dispositivos de almacenamiento" #. Gets and serializes the storage config used to calculate the current proposal. #. #. @return [String] Serialized config according to the JSON schema. #: service/lib/agama/dbus/storage/manager.rb:298 msgid "Activating storage devices" msgstr "Activar dispositivos de almacenamiento" #: service/lib/agama/dbus/storage/manager.rb:301 msgid "Probing storage devices" msgstr "Probando los dispositivos de almacenamiento" #: service/lib/agama/dbus/storage/manager.rb:304 #, fuzzy msgid "Applying storage configuration" msgstr "Ajustando configuración de almacenamiento" #. TRANSLATORS: SSL certificate details #: service/lib/agama/ssl/certificate_details.rb:31 msgid "Certificate:" msgstr "Certificado:" #: service/lib/agama/ssl/certificate_details.rb:31 msgid "Issued To" msgstr "Emitido para" #: service/lib/agama/ssl/certificate_details.rb:32 msgid "Issued By" msgstr "Emitido por" #: service/lib/agama/ssl/certificate_details.rb:32 msgid "SHA1 Fingerprint: " msgstr "Huella digital SHA1: " #: service/lib/agama/ssl/certificate_details.rb:34 msgid "SHA256 Fingerprint: " msgstr "Huella digital SHA256: " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:46 msgid "Common Name (CN): " msgstr "Nombre común (CN): " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:48 msgid "Organization (O): " msgstr "Organización (O): " #. label followed by the SSL certificate identification #: service/lib/agama/ssl/certificate_details.rb:50 msgid "Organization Unit (OU): " msgstr "Unidad organizativa (OU): " #. Issue when the device has several users. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:74 #, c-format msgid "The device with alias '%s' is used by more than one device" msgstr "El dispositivo con el alias %s es usado por más de un dispositivo" #. Issue when the device has both filesystem and a user. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:95 #, c-format msgid "" "The device with alias '%s' cannot be formatted because it is used by other " "device" msgstr "" "El dispositivo con el alias %s no se puede formatear porque es usado por " "otro dispositivo" #. Issue when the device has both partitions and a user. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/alias.rb:118 #, c-format msgid "" "The device with alias '%s' cannot be partitioned because it is used by other " "device" msgstr "" "El dispositivo con el alias %s no se puede particionar porque es usado por " "otro dispositivo" #. Error if a boot device is required and unknown. #. #. This happens when the config solver is not able to infer a boot device, see #. {ConfigSolvers::Boot}. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/boot.rb:75 msgid "The boot device cannot be automatically selected" msgstr "El dispositivo de arranque no se puede seleccionar automáticamente" #. TRANSLATORS: %s is replaced by a device alias (e.g., "boot"). #: service/lib/agama/storage/config_checkers/boot.rb:86 #, c-format msgid "There is no boot device with alias '%s'" msgstr "No hay ningún dispositivo de arranque con el alias %s" #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:73 #, perl-brace-format msgid "" "No passphrase provided (required for using the method '%{crypt_method}')." msgstr "" "No se proporcionó ninguna contraseña (obligatoria para utilizar el método '%" "{crypt_method}')." #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:89 #, perl-brace-format msgid "Encryption method '%{crypt_method}' is not available in this system." msgstr "" "El método de cifrado '%{crypt_method}' no está disponible en este sistema." #. TRANSLATORS: 'crypt_method' is the identifier of the method to encrypt the device #. (e.g., 'luks1', 'random_swap'). #: service/lib/agama/storage/config_checkers/encryption.rb:117 #, perl-brace-format msgid "'%{crypt_method}' is not a suitable method to encrypt the device." msgstr "'%{crypt_method}' no es un método adecuado para cifrar el dispositivo." #. TRANSLATORS: %s is replaced by a mount path (e.g., "/home"). #: service/lib/agama/storage/config_checkers/filesystem.rb:75 #, c-format msgid "Missing file system type for '%s'" msgstr "Falta el tipo de sistema de archivos de '%s'" #. TRANSLATORS: %{filesystem} is replaced by a file system type (e.g., "Btrfs") and #. %{path} is replaced by a mount path (e.g., "/home"). #: service/lib/agama/storage/config_checkers/filesystem.rb:98 #, perl-brace-format msgid "The file system type '%{filesystem}' is not suitable for '%{path}'" msgstr "" "El tipo de sistema de archivos '%{filesystem}' no es adecuado para '%{path}'" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/logical_volume.rb:82 #, c-format msgid "There is no LVM thin pool volume with alias '%s'" msgstr "No hay ningún volumen de grupo ligero LVM con alias \"%s\"" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "md1"). #: service/lib/agama/storage/config_checkers/md_raid.rb:98 #, c-format msgid "There is no MD RAID member device with alias '%s'" msgstr "No hay ningún dispositivo de miembro de RAID MD con el alias %s" #. Issue if the MD RAID level is missing and the device is not reused. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:111 msgid "There is a MD RAID without level" msgstr "Hay un RAID MD sin nivel" #. Issue if the MD RAID does not contain enough member devices. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:124 #, c-format msgid "At least %s devices are required for %s" msgstr "Se requieren al menos %s dispositivos para %s" #. Issue if the device member is deleted. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:171 #, perl-brace-format msgid "" "The device '%{member}' cannot be deleted because it is part of the MD RAID %" "{md_raid}" msgstr "" "El dispositivo %{member} no puede ser borrado porque es parte del RAID MD %" "{md_raid}" #. Issue if the device member is resized. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:194 #, perl-brace-format msgid "" "The device '%{member}' cannot be resized because it is part of the MD RAID %" "{md_raid}" msgstr "" "El dispositivo %{member} no puede ser redimensionado porque es parte del " "RAID MD %{md_raid}" #. Issue if the device member is formatted. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:217 #, perl-brace-format msgid "" "The device '%{member}' cannot be formatted because it is part of the MD RAID " "%{md_raid}" msgstr "" "El dispositivo %{member} no se puede formatear porque es parte del RAID MD %" "{md_raid}" #. Issue if the device member is partitioned. #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:240 #, perl-brace-format msgid "" "The device '%{member}' cannot be partitioned because it is part of the MD " "RAID %{md_raid}" msgstr "" "El dispositivo '%{member}' no puede ser particionado porque es un parte de " "dispositivo del RAID MD %{md_raid}" #. Issue if the device member is used by other device (e.g., as target for physical volumes). #. #. @param member_config [#search] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:262 #, perl-brace-format msgid "" "The device '%{member}' cannot be used because it is part of the MD RAID %" "{md_raid}" msgstr "" "El dispositivo '%{member}' no se puede usar porque es parte del RAID MD %" "{md_raid}" #. Issue if the parent of the device member is formatted. #. #. @param device [Y2Storage::BlkDevice] #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/md_raid.rb:287 #, perl-brace-format msgid "" "The device '%{device}' cannot be formatted because it is part of the MD RAID " "%{md_raid}" msgstr "" "El dispositivo '%{device}' no puede ser formateado porque es parte del RAID " "MD %{md_raid}" #. TRANSLATORS: 'method' is the identifier of the method to encrypt the device #. (e.g., 'luks1'). #: service/lib/agama/storage/config_checkers/physical_volumes_encryption.rb:61 #, perl-brace-format msgid "'%{method}' is not a suitable method to encrypt the physical volumes." msgstr "%{method} no es un método adecuado para cifrar los volúmenes físicos." #. TRANSLATORS: %s is replaced by a device name (e.g., "/dev/vda"). #: service/lib/agama/storage/config_checkers/search.rb:74 #, c-format msgid "Mandatory device %s not found" msgstr "No se encuentra el dispositivo obligatorio %s" #. TRANSLATORS: %s is replaced by a device type (e.g., "drive"). #: service/lib/agama/storage/config_checkers/search.rb:77 #, c-format msgid "Mandatory %s not found" msgstr "No se encuentra el dispositivo %s obligatorio" #. @return [String] #: service/lib/agama/storage/config_checkers/search.rb:85 msgid "drive" msgstr "unidad" #: service/lib/agama/storage/config_checkers/search.rb:87 msgid "MD RAID" msgstr "RAID MD" #: service/lib/agama/storage/config_checkers/search.rb:89 msgid "partition" msgstr "partición" #: service/lib/agama/storage/config_checkers/search.rb:91 msgid "LVM logical volume" msgstr "Volumen lógico LVM" #: service/lib/agama/storage/config_checkers/search.rb:93 msgid "device" msgstr "dispositivo" #. Issue if the volume group name is missing. #. #. @return [Issue, nil] #: service/lib/agama/storage/config_checkers/volume_group.rb:77 msgid "There is a volume group without name" msgstr "Hay un grupo de volúmenes sin nombre" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:109 #, c-format msgid "There is no LVM physical volume with alias '%s'" msgstr "No existe ningún volumen físico LVM con alias \"%s\"" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "pv1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:136 #, c-format msgid "" "The list of target devices for the volume group '%s' is mixing reused " "devices and new devices" msgstr "" "La lista de dispositivos de destino para el grupo de volumenes %s mezcla " "dispositivos reutilizados y nuevos" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "disk1"). #: service/lib/agama/storage/config_checkers/volume_group.rb:156 #, c-format msgid "There is no target device for LVM physical volumes with alias '%s'" msgstr "" "No existe dispositivo de destino para volúmenes físicos LVM con alias \"%s\"" #. TRANSLATORS: %s is the replaced by a device alias (e.g., "disk1"). #: service/lib/agama/storage/config_checkers/volume_groups.rb:66 #, c-format msgid "" "The device '%s' is used several times as target device for physical volumes" msgstr "" "El dispositivo \"%s\" se utiliza varias veces como dispositivo de destino " "para volúmenes físicos" #. Text of the reason preventing to shrink because there is no content. #. #. @return [String, nil] nil if there is content or there is any other reasons. #: service/lib/agama/storage/device_shrinking.rb:151 msgid "" "Neither a file system nor a storage system was detected on the device. In " "case the device does contain a file system or a storage system that is not " "supported, resizing will most likely cause data loss." msgstr "" "No se detectó ni un sistema de archivos ni un sistema de almacenamiento en " "el dispositivo. En caso de que el dispositivo contenga un sistema de " "archivos o un sistema de almacenamiento que no sea compatible, cambiar el " "tamaño probablemente provocará la pérdida de datos." #. Text of the reason preventing to shrink because there is no valid minimum size. #. #. @return [String, nil] nil if there is a minimum size or there is any other reasons. #: service/lib/agama/storage/device_shrinking.rb:162 msgid "Shrinking is not supported by this device" msgstr "Este dispositivo no admite la reducción" #. Copy /etc/nvme/host* to keep NVMe working after installation, bsc#1238038 #: service/lib/agama/storage/finisher.rb:126 msgid "Copying important installation files to the target system" msgstr "Copiando archivos de instalación importantes al sistema de destino" #. Step to write the bootloader configuration #: service/lib/agama/storage/finisher.rb:161 msgid "Installing bootloader" msgstr "Instalando cargador de arranque" #. Step to finish the Y2Storage configuration #: service/lib/agama/storage/finisher.rb:178 msgid "Adjusting storage configuration" msgstr "Ajustando configuración de almacenamiento" #. Step to finish the iSCSI configuration #: service/lib/agama/storage/finisher.rb:189 msgid "Adjusting iSCSI configuration" msgstr "Ajustando configuración iSCSI" #. Step to configure the file-system snapshots #: service/lib/agama/storage/finisher.rb:200 msgid "Configuring file systems snapshots" msgstr "Configurando instantáneas del sistema de archivos" #. Issue representing the proposal is not valid. #. #. @return [Issue] #: service/lib/agama/storage/proposal.rb:305 msgid "Cannot calculate a valid storage setup with the current configuration" msgstr "" "No es posible calcular una configuración de almacenamiento válida con la " "configuración actual" #. Issue to communicate a generic Y2Storage error. #. #. @return [Issue] #: service/lib/agama/storage/proposal.rb:315 msgid "A problem ocurred while calculating the storage setup" msgstr "Ocurrió un problema al calcular la configuración de almacenamiento" #. Step to copy the installation logs #: service/lib/agama/storage/umounter.rb:112 msgid "Copying logs" msgstr "Copiando registros" #. Step to unmount the target file-systems #: service/lib/agama/storage/umounter.rb:146 msgid "Unmounting storage devices" msgstr "Desmontando dispositivos de almacenamiento" #~ msgid "Logout iSCSI targets" #~ msgstr "Cerrar sesión en destinos iSCSI" #~ msgid "Discover iSCSI targets" #~ msgstr "Buscar destinos iSCSI" #~ msgid "Login iSCSI targets" #~ msgstr "Iniciar sesión en destinos iSCSI" #, c-format #~ msgid "Cannot login to iSCSI target %s" #~ msgstr "No es posible iniciar sesión en el destino iSCSI %s" #~ msgid "Analyze disks" #~ msgstr "Analizar discos" #~ msgid "Configure software" #~ msgstr "Configurar software" #~ msgid "Prepare disks" #~ msgstr "Preparar discos" #~ msgid "Install software" #~ msgstr "Instalar software" #~ msgid "Configure the system" #~ msgstr "Configurar el sistema" #~ msgid "Load software translations" #~ msgstr "Cargar traducciones de software" #~ msgid "Load storage translations" #~ msgstr "Cargar traducciones de almacenamiento" #~ msgid "" #~ "Trying to import a self signed certificate. Do you want to trust it and " #~ "register the product?" #~ msgstr "" #~ "Intentando importar un certificado autofirmado. ¿Desea confiar en él y " #~ "registrar el producto?" #~ msgid "Try again" #~ msgstr "Volver a intentar" #~ msgid "Continue anyway" #~ msgstr "Continuar de todos modos" #~ msgid "Skip" #~ msgstr "Saltar" #~ msgid "Yes" #~ msgstr "Sí" #~ msgid "No" #~ msgstr "No" #, perl-brace-format #~ msgid "" #~ "No checksum for the file %{file} was found in the repository. This means " #~ "that although the file is part of the signed repository, the list of " #~ "checksums does not mention this file. Use it anyway?" #~ msgstr "" #~ "No se ha encontrado ninguna suma de comprobación para el archivo %{file} " #~ "en el repositorio. Eso significa que aunque el archivo sea parte del " #~ "repositorio firmado, la lista de sumas de comprobación no menciona este " #~ "archivo. ¿Quiere usarlo de todas formas?" #, perl-brace-format #~ msgid "" #~ "The checksum of the file %{file} is \"%{digest}\" but the expected " #~ "checksum is unknown. This means that the origin and integrity of the file " #~ "cannot be verified. Use it anyway?" #~ msgstr "" #~ "La suma de comprobación del archivo %{file} es \"%{digest}\", pero la " #~ "suma de comprobación esperada es desconocida. Eso significa que el origen " #~ "y la integridad del archivo no se pueden verificar. ¿Desea usarlo de " #~ "todas formas?" #, perl-brace-format #~ msgid "" #~ "The expected checksum of file %{file} is \"%{found}\" but it was expected " #~ "to be \"%{expected}\". The file has changed by accident or by an attacker " #~ "since the creater signed it. Use it anyway?" #~ msgstr "" #~ "La suma de verificación del archivo %{file} es \"%{found}\", pero se " #~ "esperaba que fuera \"%{expected}\". El archivo ha cambiado por accidente " #~ "o ha sufrido un ataque desde que el creador lo firmó. ¿Desea usarlo de " #~ "todas formas?" #~ msgid "There was a problem running a package script." #~ msgstr "Se ha producido un problema al ejecutar un guion de paquete." #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is not digitally signed. The origin " #~ "and integrity of the file cannot be verified. Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} de %{repo_url} no está firmado digitalmente. El " #~ "origen y la integridad del archivo no se pueden verificar. ¿Desea usarlo " #~ "de todas formas?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is not digitally signed. The origin and integrity of " #~ "the file cannot be verified. Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} no está firmado digitalmente. El origen y la " #~ "integridad del archivo no se pueden verificar. ¿Desea usarlo de todas " #~ "formas?" #, perl-brace-format #~ msgid "" #~ "The key %{id} (%{name}) with fingerprint %{fingerprint} is unknown. Do " #~ "you want to trust this key?" #~ msgstr "" #~ "La clave %{id} (%{name}) con la huella digital %{fingerprint} es " #~ "desconocida. ¿Quieres confiar en esta clave?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is digitally signed with the " #~ "following unknown GnuPG key: %{key_id}. Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} de %{repo_url} está firmado digitalmente con la " #~ "siguiente clave GnuPG desconocida: %{key_id}. ¿Desea usarlo de todas " #~ "formas?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is digitally signed with the following unknown GnuPG " #~ "key: %{key_id}. Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} está firmado digitalmente con la siguiente clave " #~ "GnuPG desconocida: %{key_id}. ¿Desea usarlo de todas formas?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} from %{repo_url} is digitally signed with the " #~ "following GnuPG key, but the integrity check failed: %{key_id} (%" #~ "{key_name}). Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} de %{repo_url} está firmado digitalmente con la " #~ "siguiente clave GnuPG, pero la comprobación de integridad ha fallado: %" #~ "{key_id} (%{key_name}). ¿Desea usarlo de todas formas?" #, perl-brace-format #~ msgid "" #~ "The file %{filename} is digitally signed with the following GnuPG key, " #~ "but the integrity check failed: %{key_id} (%{key_name}). Use it anyway?" #~ msgstr "" #~ "El archivo %{filename} está firmado digitalmente con la siguiente clave " #~ "GnuPG, pero la comprobación de integridad ha fallado: %{key_id} (%" #~ "{key_name}). ¿Desea usarlo de todas formas?" #~ msgid "Trust" #~ msgstr "Confiar" #~ msgid "Refreshing repositories metadata" #~ msgstr "Actualizando los metadatos del repositorios" #~ msgid "Calculating the software proposal" #~ msgstr "Calcular la propuesta de software" #~ msgid "Initializing sources" #~ msgstr "Inicializando fuentes" #, c-format #~ msgid "Adding service '%s' failed." #~ msgstr "Error al añadir el servicio %s." #, c-format #~ msgid "Updating service '%s' failed." #~ msgstr "Error al actualizar el servicio %s." #, c-format #~ msgid "Saving service '%s' failed." #~ msgstr "Error al guardar el servicio %s." #, c-format #~ msgid "Refreshing service '%s' failed." #~ msgstr "Error al renovar el servicio %s." #, c-format #~ msgid "Removing service '%s' failed." #~ msgstr "Error al eliminar el servicio %s." #, c-format #~ msgid "Could not read repository \"%s\"" #~ msgstr "No se pudo leer el repositorio \"%s\"" #~ msgid "Product not selected yet" #~ msgstr "Producto aún no seleccionado" #~ msgid "Product must be registered" #~ msgstr "El producto debe estar registrado" #, c-format #~ msgid "Found %s dependency issues." #~ msgstr "Se encontraron %s problemas de dependencias." #~ msgid "Writing Linux Security Modules configuration" #~ msgstr "Escribiendo configuración de módulos de seguridad de Linux" #~ msgid "Running user-defined scripts" #~ msgstr "Ejecutando comandos definidos por el usuario" #~ msgid "Deploying user-defined files" #~ msgstr "Implementando los archivos definidos por el usuario" #~ msgid "Calculating the storage proposal" #~ msgstr "Calcular la propuesta de almacenamiento" #~ msgid "Adding storage-related packages" #~ msgstr "Agregar paquetes relacionados con el almacenamiento" #~ msgid "No device selected for installation" #~ msgstr "No se seleccionó ningún dispositivo para la instalación" #, perl-brace-format #~ msgid "The following selected device is not found in the system: %{devices}" #~ msgid_plural "" #~ "The following selected devices are not found in the system: %{devices}" #~ msgstr[0] "" #~ "El siguiente dispositivo seleccionado no se encuentra en el sistema: %" #~ "{devices}" #~ msgstr[1] "" #~ "Los siguientes dispositivos seleccionados no se encuentran en el sistema: " #~ "%{devices}" #~ msgid "" #~ "Defining a user, setting the root password or a SSH public key is required" #~ msgstr "" #~ "Es necesario definir un usuario, establecer la contraseña de root o una " #~ "clave pública SSH" #~ msgid "Selecting Linux Security Modules" #~ msgstr "Seleccionar módulos de seguridad de Linux" #, perl-brace-format #~ msgid "The file %{filename} from repository %{repo_name} (%{repo_url})" #~ msgstr "El archivo %{filename} del repositorio %{repo_name} (%{repo_url})" #, perl-brace-format #~ msgid "The file %{filename}" #~ msgstr "El archivo %{filename}" #~ msgid "No device found for a mandatory drive" #~ msgstr "No se encontró ningún dispositivo para una unidad obligatoria" #~ msgid "No device found for a mandatory partition" #~ msgstr "No se encontró ningún dispositivo para una partición obligatoria" #~ msgid "Cannot accommodate the required file systems for installation" #~ msgstr "" #~ "No se pueden acomodar los sistemas de archivos necesarios para la " #~ "instalación" #~ msgid "No device found for an optional drive" #~ msgstr "No se encontró ningún dispositivo para una unidad opcional" #~ msgid "No device found for an optional partition" #~ msgstr "No se encontró ningún dispositivo para una partición opcional" #~ msgid "Writing Users" #~ msgstr "Escribiendo usuarios" #~ msgid "Writing Network Configuration" #~ msgstr "Escribiendo configuración de red" #~ msgid "Saving Language Settings" #~ msgstr "Guardando ajustes del lenguaje" #~ msgid "Writing repositories information" #~ msgstr "Escribiendo información de repositorios"